Playcraft Triple Twister Entry Panel R5-1317 User manual

IMPORTANT NOTES: Read First
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
TRIPLE TWISTER ENTRY PANEL
Rev A
10/2/2009
R5-1317
Page 1 of 5
will vary slightly, but does not
affect the assembly.
NOTE: Standard Configuration
shown. Canada configuration
FIGURE 1
Triple Wave Slide
(A) Use liquid thread lock (such as Loctite
®
) with all threaded hardware. Important: Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) Refer to Installation Manual for R5-09 Collars, R5-11 Socket Clamps and 1710 Twister Slide assembly
instructions.
See Installation Manual Sections
R5-09 Collars and R5-11 Socket
Clamps and 1710 Twister Slide
assembly instructions

For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
TRIPLE TWISTER ENTRY PANEL
Rev A
10/2/2009
R5-1317
Page 2 of 5
33" *
838mm
39" *
990mm 43" *
1091mm
FIGURE 3
FIGURE 2
Step 1
Locate and attach collars at the heights shown in
Figure 2. (See Note A and Note B)
* Heights shown from top of deck to top of collar.
Step 2
(Factory Assembled)
Attach the Head Rail to the Triple Twister Slide Entry
as shown in Figure 3. (See Note A)
TRIPLE TWISTER SLIDE
ENTRY PANEL
3/8" x 1"
O.D. Washer
3/8" x 1" Button
Head Bolt
1/2" SAE
Washer
3/8" x 5/8"
Barrel Nut
HEAD
RAIL

For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
TRIPLE TWISTER ENTRY PANEL
Rev A
10/2/2009
R5-1317
Page 3 of 5
FIGURE 5
Step 3
(Factory Assembled)
For Standard R5 Triple Twister Slide Entry Panel Only
Attach the Panel Stiffeners as shown in Figure 4.
(See Note A)
Step 4
For Canada R5 Triple Twister Slide Entry Panel Only
Attach the Side Guards to the Triple Twister Slide Entry
Panel as shown in Figure 5. (See Note A)
FIGURE 4
TRIPLE TWISTER SLIDE
ENTRY PANEL
3/8" x 7/8"
O.D. Washer
3/8" x 1-1/2"
Button Head Bolt
PANEL
STIFFENER
1/2" SAE
Washer
3/8" x 5/8"
Barrel Nut
SIDE
GUARD
3/8" x 3/4"
Button Head Bolt
3/8" x 1"
O.D. Washer
TRIPLE TWISTER SLIDE
ENTRY PANEL
1/2" SAE
Washer
3/8" x 5/8"
Barrel Nut

For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
TRIPLE TWISTER ENTRY PANEL
Rev A
10/2/2009
R5-1317
Page 4 of 5
Step 5
Attach the Triple Twister Slide Entry Panel to
the Posts as shown in Figure 6.
(See Note A and Note B)
Step 6
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
RAIL
ENTRY PANEL
TRIPLE TWISTER SLIDE
Washer
1/2" SAE
Shoulder Bolt
3/8" x 1-3/8" BOTTOM SOCKET CLAMP
CLAMP TOP
SOCKET
LUG
MOUNTING
CLAMP TOP
SOCKET
BOTTOM
SOCKET CLAMP
HEAD
FIGURE 6
(Back of Triple Twister
Slide Entry Panel)

Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
TRIPLE TWISTER ENTRY PANEL
Rev A
10/2/2009
R5-1317
Page 5 of 5
Parts ListSpecifications
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance
TRIPLE TWISTER SLIDE ENTRY PANEL AND
STIFFENER:
Shall be made from high density 3/4" thick hot
extruded polyethylene sheet plastic specially
formulated for optimum UV stability and color
retention.
HEAD RAIL:
Shall be fabricated from 1.315" O.D. 12 gauge
steel tubing welded to 1/4" Steel tabs. The Head
Rail shall have a multi-stage baked-on powder
coat finish.
SIT DOWN SIDE GUARD:
Shall be fabricated from 1.029" O.D. 14 gauge
steel tubing welded to 10 gauge mounting tabs.
Sit Down Side Guard shall have a multi-stage
baked-on powder coat finish.
MOUNTING LUGS:
Shall be precision die-cast from a high-strength
aluminum alloy. The Mounting Lugs have a
multi-stage baked-on powder coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and
corrosion.
Triple Twister Entry Panel - Canada
Part # DESCRIPTION QTY.
FS-1316-CAN Twister Sit Down Side Guard Canada 4
GG-8113 Mounting Lug R3.5 2
HS-1001-R5 Socket Clamp Set R5 6
9103032-TR Bolt Button Head 3/8" x 3/4" 8
9143062-TR Bolt Shoulder 3/8" x 1-3/8" BH 2
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 8
9345002 Washer Flat SAE 1/2" 10
9443022-TR Nut Barrel 3/8" x 5/8" BH 8
Triple Twister Entry Panel
Part # DESCRIPTION QTY.
GF-7007 Mounting Lug R5 2
HS-1001-R5 Socket Clamp Set R5 6
9143062-TR Bolt Shoulder 3/8" x 1-3/8" BH 2
9345002 Washer Flat SAE 1/2" 2
Triple Twister Entry Panel - Assembled
Part # DESCRIPTION QTY.
EF-7092 Triple Twister Slide Entry Panel 1
EF-7092-S Triple Twister Slide Sit Down Panel - Stiffener 2
FS-1311-R Triple Twister Slide Head Rail 1
9103052-TR Bolt Button Head 3/8" x 1" 5
9103072-TR Bolt Button Head 3/8" x 1-1/2" 6
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 5
9333042 Washer Flat 3/8" x 7/8" O.D. 6
9345002 Washer Flat SAE 1/2" 11
9443022-TR Nut Barrel 3/8" x 5/8" BH 11
Triple Twister Entry Panel - Canada Assembled
Part # DESCRIPTION QTY.
EF-7092-CAN Triple Twister Slide Entry Panel Canada 1
FS-1311-R Triple Twister Slide Head Rail 1
9103052-TR Bolt Button Head 3/8" x 1" 5
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 5
9345002 Washer Flat SAE 1/2" 5
9443022-TR Nut Barrel 3/8" x 5/8" BH 5