
4321
Overview Installation and pairing
Start by charging the battery with the included USB cable. Use a free USB port on your
computer or a USB charger (5 V, 300 mA). The battery is fully charged when the battery
indicator turns off. A ashing light indicates that the battery needs charging.
The USB-receiver is located underneath the keyboard. Insert it in a free USB-port on
your computer. Turn on the keyboard using the power switch. Your computer should
automatically detect new hardware and install the necessary drivers. Press and hold
the F1 (RF) key until the communication indicator stops ashing to pair the keyboard
and the receiver. Your Mediatrack Edge is now ready for use. If the keyboard loses its
connection to the receiver you may have to pair the units again.
If the Mediatrack Edge is left unused for 30 minutes, it will enter sleep mode in order
to save battery power. Press any key to wake it up.
1
2 Plexgear® Plexgear® 3
2 3 4
Touchpad LED:s
1Communication indicator
2Battery indicator.
3Caps Lock indicator.
4Touchpad lock indicator.
Contents
Keyboard
USB receiver
USB charging cable (microB)
Manual
Specications:
Key stroke: 2.5 mm
Size keyboard: 295 x 91 x 11 mm
Weight keyboard: 240 g
Connection: USB
Batteries: Integrated
Frequency: 2.4 GHz
Range: Up to 10 m
The touchpad moves the mouse cursor and also has the following functions:
1One-nger tap equals a left mouse button click.
2Two-nger tap equals a right mouse button click.
3Follow the dotted line on the right side to scroll.
4Pinch to zoom in or out.
To lock or unlock the touchpad, slide in the direction of the arrow.
A three-nger tap equals a middle mouse button click.
1 2 43
1 2 3 4
Touchpad gestures
5
5 6
6