
P:F:[email protected] 03 9708 2552 • 03 9708 2553 • www.plusrite.com.auLED SOLAR STREET LIGHT RANGE PRODUCT DETAILS PLS-30WPLS-90WPLS-150W
Q20MODELNUMBERMaterialsLED CHIPSLUMENSCCTPanelCharging CRI 30WSMD57303000lm4K 5K 6K>80LED Q’ty (pcs)606V 7WWattageABSBatteryWarranty3 years12000mAh
PLS-30W
Time Discharging Time Solar 6-8 Hours10-12 Hours 90WSMD57309000lm4K 5K 6K>801806V 11.5WABS3 years24000mAh
PLS-90W
6-8 Hours10-12 Hours 150WSMD573015000lm4K 5K 6K>803006V 22WABS3 years 36000mAh
PLS-150W
6-8 Hours12-14 Hours
This bracket will come withthe solar street light.ABThis bracket can be installed on the wall or any pole with 45mm one is for 30W,90W,150Wthe diameter 45mm to 100mm.End A connect to the light. End B connect to the wall or the pole and End C connect Cto the back of the pole.
PLS-RC PLS-RCRemote controller for LED solar street light, batten light and Flood light.
LED Solar Street light Polycrystalline Solar panel Lithium baeryNo AC power cables, no electrical chargesMoon sensor, dim down to 30% lumen output when there is no movement detected.Build-in dusk to dawn sensorProduct:Net Weight: 1.50 / 2.60 / 4.20 / 5.30kg Outer ctn size: 30W: 490*375*255mmQ’ty per ctn: 10 / 5 / 4 / 3 pcsG.W per ctn: 16.50 / 15.00 / 19.00 /19.00 kgPACKING DETAILS:
PLS-30WPLS-90WPLS-150W
90W: 665*375*275mm 150W: 860*305*275mm
PLS-240WPLS-240W
240W:1270*325*275mmUnit: MM 240WSMD573024000lm4K 5K 6K>8043210V 39WAluminum3 years 42000mAh
PLS-240W
6-8 Hours12-14 Hours
60mm one is for 240WThe length of the bracket is about 500mm
Installaon heights recommended : Distance between poles recommended :
PLS-30WPLS-90WPLS-150WPLS-240W3-4M4-5M5-7M7-9M6M8M10M12-15M
Changing Modes: Press the ON button, the light will be on Mode 1, Mode 1: Motion sensor mode, starts with 100% lumen output then standby 30% lumen output if no motion after dusk.Mode 2: Constant 100% brightness after dusk.4H & 6H button: Hours lasting for the light is on after dusk, then turns off. ON button: The light is on with mode 1.
REMOTE CONTROLLER INSTRUCTION
then press the MODE button, the light will be changing to Mode 2. OFF button: The light turns off.Press the MODE button again, the light will be changing to Mode 1.
The light will come with this remote controller.