Polanik STT11-65E User manual

USER MANUAL
Competition pole vault electric stand set - wireless operation
STT11-65E
File: 2019-05-22
PRODUCT SUPPORT
Pawel Ciechanowski
p.ciechano[email protected]om

STT11-65E –wireless operation User manual 2/22
Thank you for choosing POLANIK Premium Line PV stand set with wireless operation!
Safe assembly and use
•Before you start to assemble and use the stand please read this manual carefully.
•Do not install or use the stands without a landing area.
•The stand bases must be anchored to the ground for competition or training sessions.
•After competition or training the stands are to be obligatory stored in a dry roofed place.
•The stands come with the electronic and electric components, please handle with care.
•The sports equipment produced by Polanik is designed for athletics training and use in sports competitions only.
Please pay special attention especially when using throwing implements and other throwing equipment, misuse
of athletics equipment and implements can cause serious injury. That is why training and use during sports events
have to be always supervised by authorized sports personnel. In no event shall Polanik be liable for any special,
incidental, indirect or consequential damages in connection with the purchase or use of POLANIK products or costs
over the original cost of the product.
•Unauthorized copying of this manual, in whole or in part, is prohibited.
•The contents of this manual are subject to change without notice.
•The producer reserves the right to introduce without warning changes in product constructions and colours.
Special adjustable bracket for installing TV camera* or sports camera* in the set!
*not included

STT11-65E –wireless operation User manual 3/22
Contents
I. General description and use ....................................................................................................................................... 3
II. Parts list ..................................................................................................................................................................... 4
III. Technical specification.............................................................................................................................................. 6
IV. General description of assembly .............................................................................................................................. 8
V. Assembly.................................................................................................................................................................... 9
VI. Cabling assembly .................................................................................................................................................... 13
VII. How to switch off properly the PV stands ............................................................................................................. 18
VIII. Maintenance......................................................................................................................................................... 19
IX. Emergency manual backup..................................................................................................................................... 19
X. IAAF certificate......................................................................................................................................................... 22
I. General description and use
STT11-65E is the result of Polanik’s long and profound experience in the field of the athletics equipment
production. Our electrical version of the competition PV stand completes fully the product offer. Each stand is
driven by two step motors. The operator uses a portable tablet computer (PTC) to operate wirelessly the PV stands.
Entered values are processed by the main unit (CPU) which drives the step motors. The tablet (PTC) lets you
position the crossbar in more comfortable, quicker and more precise way than in ordinary manual units. Thanks to
its clear and practical design the program is very easy to use. Now you can also get rid of traditional crossbar
placers because with our electric stand you can lower the supports very quickly and place the crossbar on the pegs
from the ground.

STT11-65E –wireless operation User manual 4/22
II. Parts list
STT11-65E is a complete set of two electric pole vault stands which are designed for athletics competitions of pole
vaulting. The set includes the following elements:
Item
no.
Part/set description
Q-ty
Pcs.
Part/set sketch
1
Left base
+ screw M 20x40 (4 pcs)
+ washer 20 (4 pcs)
1
2
Right base
+ screw M 20x40 (4 pcs)
+ washer 20 (4 pcs)
1
3
Left crossbar support
1
4
Right crossbar support
1
5
Left post
+ countersunk hex key screw
M 10x40 (4 pcs)
1

STT11-65E –wireless operation User manual 5/22
Item
no.
Part/set description
Q-ty
Pcs.
Part/set sketch
6
Right post
+ countersunk hex key screw
M 10x40 (4 pcs)
1
7
CPU (central processing unit)
+ power supply cable 230V
1
8
PTC (portable tablet computer)
1
9
Bracket for installing TV camera or
sports camera on crossbar support arm
1

STT11-65E –wireless operation User manual 6/22
III. Technical specification
Code
STT11-65E
Stand type
IAAF certified, competition, electric, wireless operation
Crossbar support
powder painted aluminium profiles and anodized aluminium
sheets
Post
special aluminium profile, detachable
Base
steel galvanized, equipped with wheels, with 4 anchoring holes
CPU (central processing unit)
heavy duty cased main unit situated near left stand base
PTC (portable tablet computer)
tablet with software for the official-operator
Crossbar support lifting mechanism
step motor, super smooth operation system based on ball
bearings
Post shifting mechanism
step motor, supper smooth operation system based on special
guide rolls
Height range [cm]
210 –628
Crossbar support horizontal shift [cm]
0-15
Post horizontal shift range [cm]
0-80
Crossbar bias correction range [mm]
0-80
Power supply
European version 230V 50Hz 400W/ US version 110V 60Hz
400W
Set net weight [kg]
~340
Packing and transport
1/4 6,65 x 0,35 x 0,35 [m] /stand post
2/4 6,65 x 0,35 x 0,35 [m] /stand post
3/4 1,70 x 0,85 x 0,65 [m] /stand bases and supports
4/4 0,79 x 0,57 x 0,34 [m] /CPU with cabling and PTC
Set gross weight [kg]
~360

STT11-65E –wireless operation User manual 7/22
STT11-65E dimensions [mm]

STT11-65E –wireless operation User manual 8/22
IV. General description of assembly
Follow the manual below to assemble the stand set. The product is delivered in parts. One complete set contains two
bases, two posts, two crossbar supports, CPU (central processing unit), PTC (portable tablet computer). To assemble
the stand set you will need:
- hex key 6 and 8
- flat wrench no. 13
- flat wrench no. 19
- flat wrench no. 30.
We recommend that the assembly process would take place at the target location because it is easier to move
separate stand parts than the whole structure. The trolleys in the bases are secured from uncontrolled movements
by means of special safety bars while the set is transported. The safety bar should remain fastened until the post is
screwed down to the trolley of the base. After that stage has been completed you have to remove the safety bars.
safety bar screws
safety bar immobilizes
the trolley
holes to fasten the base to the ground

STT11-65E –wireless operation User manual 9/22
V. Assembly
WARNING: failure to follow the sequence of these assembly operations could result in serious
accident or damages to the construction.
As it is marked on the bases,
place them on the sides of the
PV box, spaced apart according
to the below drawing.
„0” – line „0” according to the IAAF rules
L –left stand base
R –right stand base
LA –landing area projection
PV –Pole Vault box [mm]
Screw the crossbar supports to
lying posts (left and right) using
screws screwed into guides on
posts.
crossbar support
mounting holes
in the runner

STT11-65E –wireless operation User manual 10/22
Install the posts according to the
labels.
Unscrew the screws M20x40 (4
pcs) marked “S”, they will be
needed to fasten the post.
After that the post is ready to be
installed on the base trolley.
Press hinge pin levers according
to the arrows.
Place hinge pin levers between
catches.
Position stand post foot over the
hinge.
hinge pin