POLARIS ELECTRONICS SAILOR 7222 User manual

U-mount install guide for SAILOR 7222 VHF/DSC standard installation
p/n POL 7222 U-MOUNT
For connections, see next page:
POL 7222 U-MOUNT Guide 2022 a03
and Handset

LAN Cable, use first connector in both units, as shown (3)
DSC VHF
Antennas (2)
Ground
Remove the four Torx screws and take off
the cover of the Transceiver Unit, to enter
the Supply terminals
Electrical connection SAILOR 7222A VHF/DSC
U-Mount Kit, p/n POL 7222 U-MOUNT:
1. 1 pcs. U-mount Bracket p/n 407224A-930 for 7224 Control Unit
2. 2 pcs. 2 meter Adapter antenna cable PL259(UHF) female to TNC male for VHF and DSC Antennas
3. 1 pcs. LAN Patch cable 2 meter for LAN connection between Transceiver and Control unit.
4. 1 pcs. Cable for NMEA Position input, p/n 406208-941 for AUX connector
5. 1 pcs. 1.5 meter 3x1.5 power cable for 7226 Transceiver unit
(5)
Handset
NMEA from Navigator to
AUX Connector:
White NMEA in+
Green NMEA in-
Cable p/n 406208-941
(4)
Power
24V DC
CU Power cable
Red + 24V DC
Black -24V DC
White connect to
Black -24V DC