Poly-Tex PX7025 User manual

FLAT MATE DISPLAY
PX7025
Assembly Instructions
Important!
Please read these instructions carefully before beginning to assemble
this display. Save these instructions for future reference.
Poly-Tex, Inc. • PO Box 458, 27725 Danville Ave, Castle Rock, MN 55010 • [phone] • [phone] • Fax [phone] • www.poly-tex.com
Revision: AB-220309

Assembly Instructions
PX7025 Flat Mate Display-Single 2 Revision AB-220309
1.0 Product Number Cross-Reference
 Part number references are included in the instructions for the galvanized components. Refer to the second letter
change in the part number for cross reference to the appropriate powder-coated color.
FLAT MATE DISPLAY
DESCRIPTION GALVANIZED RED BLACK GREEN
BENCH FRAME FLAT MATE PX1003 PR1003 PK1003 PG1003
SNAPPER PIN.250"x2.25" NB1996
PX7025 6' BENCH
X-STABILIZER 6' PX1100 PR1100 PK1100 PG1100
BENCH TOP W/EXP 23"W x 6' LG FK1003 PR1173 PK1173 PG1173
BENCH TOP W/EXP 1'-6"W x 6' LG FK1000 PR1172 PK1172 PG1172
BENCH TOP W/EXP 12"W x 6' LG FK1004 PR1174 PK1174 PG1174
PX7025 4' BENCH
X-STABILIZER 4' PX1101 PR1101 PK1101 PG1101
BENCH TOP W/EXP 23"W x 4' LG FK1011 PR1143 PK1143 PG1143
BENCH TOP W/EXP 1'-6"W x 4' LG FK1010 PR1142 PK1142 PG1142
BENCH TOP W/EXP 12"W x 4' LG FK1008 PR1141 PK1141 PG1141
OPTIONAL PARTS
OPTIONAL CASTERS
5" CASTER/EXP 1-1/4'' W/BRAKE FB2513
OPTIONAL PURLIN SUPPORT
PURLIN EXTENSION SINGLE PX1106 PR1106 PK1106 PG1106
6' PURLIN
6'-1 1/2" BASKET PURLIN -95 GM4000 PR1177 PK1177 PG1177
4' PURLIN
49 1/2" BASKET PURLIN FB2535 PR1147 PK1147 PG1147
OPTIONAL SIGN SUPPORT
SIGN POST EXTENSION FB3072 PR1160 PK1160 PG1160
CARRIAGE BOLT 1/4"x 1-3/4" G5 NB1818
LOCK WASHER 1/4" ZP NB1860
WING NUT 1/4" ZP NB1902
6' SIGN
SIGN HOLDER 7" x 72" W/ BEND FB3074 PR1176 PK1176 PG1176
4' SIGN
SIGN HOLDER 7" x 48" FB3075 PR1146 PK1146 PG1146

Assembly Instructions
PX7025 Flat Mate Display-Single 3 Revision AB-220309
2.0 Parts List
2.1 Base Unit
2.2 Optional Components
IMAGE TAG # QTY ITEM # DESCRIPTION
12PX1003 BENCH FRAME FLAT MATE
22PX1100 X-STABILIZER 6’
31NB1996 SNAPPER PIN .250”x1.75”
42FK1003 BENCH TOP W/EXP. 23”x6’ LG
51FK1000 BENCH TOP W/EXP. 1’-6”x6’ LG
61FK1004 BENCH TOP W/EXP. 12”x6’ LG
Questions? Please call Poly-Tex, Inc. • PO Box 458, 27725 Danville Ave, Castle Rock, MN 55010 • [phone] • [phone] • Fax [phone] • www.poly-tex.com
TAG # QTY ITEM # DESCRIPTIONIMAGE
74FB2513 5” CASTER/EXP 1-1/4” W/BRAKE
81PX1106 PURLIN EXTENSION SINGLE
91GM4000 6’-1 1/2” BASKET PURLIN –95
10 2FB3072 SIGN POST EXTENSION
11 1FB3074 SIGN HOLDER 7” x 72” W / BEND
12 2NB1818 CARRIAGE BOLT 1/4”x 1-3/4” G5
13 2NB1860 LOCK WASHER 1/4 ZP
14 2NB1902 WING NUT 1/4" ZP

Assembly Instructions
PX7025 Flat Mate Display-Single 4 Revision AB-220309
3.0 Base Unit
3.1 Frame
 If Casters are provided with this assembly, install them at this time according to step 4.1.
 Locate a wall or object and lean one End Frame PX1003 against during initial assembly. Lay the two Stabilizers,
PX1100 on the floor near the back of the assembly location.
 Position the other End Frame at approximately the proper spacing and hold one Stabilizer above the two frame pins
with the bend hanging down, as shown.
 Engage the Stabilizer on the lower pin first, then position the other, and rotate 90° until the Stabilizer is tight against
the frame post.
TAG # QTY ITEM # DESCRIPTION
12PX1003 BENCH FRAME FLAT MATE
21PX1100 X-STABILIZER 6’
2
1
1

Assembly Instructions
PX7025 Flat Mate Display-Single 5 Revision AB-220309
3.2 Stabilizer
 Relocate the feet of the End Frame near the wall until both End Frames are plumb and hold this frame
through the next step.
 Position the Stabilizer with the bend upward, first on the remaining lower pin, and then the final pin.
 Rotate the Stabilizer on the pins until it is against the back post. The bends in the Stabilizers should nest in
an offsetting position so that the Stabilizers are nearly in the same plane.
 Install the Snapper Pin NB1996 through the holes in the center of the Stabilizers and snap closed.
 Align the Bench Frames parallel with each other and square with the Stabilizer group.
TAG # QTY ITEM # DESCRIPTION
21PX1100 X-STABILIZER 6’
31NB1996 SNAPPER PIN .250”x1.75”
2
3

Assembly Instructions
PX7025 Flat Mate Display-Single 6 Revision AB-220309
3.3 Bench Tops
 Position the lower Bench Top FK1003 with the bench ends over the bench supports of the End Frames.
 Engage the front of the Bench Top under the front tabs and lower the bench in place.
 Repeat the above instructions for each of the other Bench Tops. Frames will not have the tabs at every level.
TAG # QTY ITEM # DESCRIPTION
41FK1003 BENCH TOP W/EXP. 23”x6’ LG
51FK1000 BENCH TOP W/EXP. 1’-6”x6’ LG
61FK1004 BENCH TOP W/EXP. 12”x6’ LG
6
5
4

Assembly Instructions
PX7025 Flat Mate Display-Single 7 Revision AB-220309
4.0 Mobility Casters
4.1 Casters
 Prior to assembly of Display, turn each Base Frame on the back and remove the two Square Plugs, RS5001 from
the
bottoms of the posts.
 Insert a Caster stem fully into each post and rotate the collar of each caster until it fits firmly in place.
TAG # QTY ITEM # DESCRIPTION
12PX1003 BENCH FRAME FLAT MATE
74FB2513 5” CASTER/EXP 1-1/4” W/BRAKE
1
7

Assembly Instructions
PX7025 Flat Mate Display-Single 8 Revision AB-220309
5.0 Accessories
5.1 Purlins
 Insert a Purlin Extension PX1106 in each back post with the projection facing forward.
 Position a Basket Purlin GM4000 under the lower clips of each Purlin Extension and rotate 180° until the purlin is
secure.
 Repeat the action for the upper Basket Purlin.
TAG # QTY ITEM # DESCRIPTION
82PX1106 PURLIN EXTENSION SINGLE
91GM4000 6’-1 1/2” BASKET PURLIN –95
8
9
8

Assembly Instructions
PX7025 Flat Mate Display-Single 9 Revision AB-220309
5.2 Sign Holder
 Insert a Sign Post FB3072 in each back post with the holes facing forward.
 Attach Sign Holder with two bolts, washers, and nuts.
 Continuous runs of benches use a common Sign Post between Sign Holders.
 Signs may be installed back-to-back using the same set of hardware.
TAG # QTY ITEM # DESCRIPTION
10 2FB3072 SIGN POST EXTENSION
11 1FB3074 SIGN HOLDER 7” x 72” W / BEND
12 2NB1818 CARRIAGE BOLT 1/4”x 1-3/4” G5
13 2NB1860 LOCK WASHER 1/4 ZP
14 2NB1902 WING NUT 1/4" ZP
14
13
12
10
11

Assembly Instructions
PX7025 Flat Mate Display-Single 10 Revision AB-220309
6.0 Connecting Run
6.1 Connection Extension
 Assemble the Extension in the same manner and sequence as the original base and accessories.
 NOTE: Extended runs of this product are not intended to be used on Casters.
TAG # QTY ITEM # DESCRIPTION
15 1PX7025-XT6 FLAT MATE DISPLAY-SGL EXT
15