PAIR
To pair your Bluetooth USB adapter to your
headset, do the following:
1 Insert the USB adapter into your laptop or
computer and wait for your computer to
recognize it.
2 Put your headset in pair mode (refer to your
headset’s user guide).
NOTE: USB-C shown. USB connection may vary but
function is the same.
3 Put your USB adapter into pair mode by
gently pressing and holding the Pair button
with a pen or paperclip until the USB
adapter ashes red and blue.
Pairing is successful when you hear “pairing
successful” and the USB adapter LED is solid
blue.
CONFIGURE
Windows
Your USB adapter comes ready to take calls.
If you want to listen to music, you need to
configure your USB adapter.
1 To configure your USB adapter to play
music, go to Start menu > Control Panel >
Sound > Playback tab. Select
Poly BT600, set it as the Default Device and
click OK.
2 To pause music when you place or receive
calls, go to Start menu > Control Panel >
Sound > Communications tab and select the
desired parameter.
Mac
To congure the USB adapter, go to Apple
menu > System Preferences > Sound. On
both the Input and Output tabs, select Poly
BT600.
