Polywood CLC47 User manual

A - 3" Chair screw
16
B - capnut
Left sideframe
Left top rail
bolts are 1/4-20
Attach left sideframe to seat assemby and
right top rail using (4) 3” chair screws
Attach right sideframe to seat assemby and
using (2) 3” chair screws
See page 2
Page 1
Lay another seat assembly on its side.
Description
Qty.
*CLC47 shown
__(1) Hardware pack
10/25/07
using (2) 3” chair screws
-Repeat until all seats and backs
TOOLS NEEDED
Step 1
Step 3
Model: CLC47 & CMC47
Phillips head screwdriver
Lay a seat assembly on its side.
Step 2
- Attach seat support to seat assembly
4mm" HEX KEY: INCLUDED
Assembly Instructions left top rail using (4) 3” chair screws
- Attach back assembly to seat assembly
are assembled.
__(2) Seat assembly
__(2) Back assembly
__(2) Seat support
__(2) Top rails
Right, Left
__(2) Sideframes
__(1) Front mid leg
__(1) Rear mid leg
__(2) Seat cushion
__(2) Back cushion
3
2
C -1 1/2" chair bolt
D -3 1/4" chair bolt
Seat assembly
Back assembly
Seat support
1

B
D
C
D
B
B
Page 2
Step 5
Attach all sections together using
B - (3) capnuts
C - (1) 1 1/2" chair bolt
D - (2) 3 1/4" chair bolts
Step 4
Fit all sections together with mid legs
CMC47