Polywood NCT37 User manual

B - 1/4-20 X 2-1/4 WAFER SHCS
4
A - 1/4-20 X 1-1/2 WAFER SHCS
1
B
Leg
Foot
C
C
Table top
DD
Brace
Umbrella
support
A
Removable table plug
included in table.
D - .273 X 3 SOCKET WAFER A
6
- 4mm HEX KEY, ALLEN,
T-HANDLE (INCLUDED)
C - 14 X 2.50 HEX WASHER T-A ALCHM
8
Qty. Description
Model:
NCT37, NCCT37, NCRT37, NCBT37
Step 2
Lay table top on flat surface.
Attach the leg assemblies to the table frame using
(8) 14x2½" hex screws *Do not tighten until last step
Step 3
Attach the leg braces to the leg assemblies using
(4) .27x3" screws
Attach the umbrella support using
(2) .27x3" screws
Step 4
Set table upright and tighten all bolts.
The 1½" Chair bolt secures the umbrella pole.
Step 1
Attach feet to legs using (4) 2¼" Chair bolts.
__(1) Table top
__(4) Leg
__(2) Foot
__(2) Brace
__(1) Umbrella support
__(1) Hardware pack
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
TOOLS NEEDED
- 3/8" Wrench
10/5/2015
ASSEMBLY INSTRUCTIONS

To view our full warranty, please visit the warranty page on our website at
polywoodinc.com/resources