
Getting to Know Your Vibe
10
Dome Lamp Control
The dome lamp control switch is located
on the dome lamp. To operate the lamp,
place the switch in one of the following
positions:
DOOR: In this position, the dome lamp
will turn on when any door, the liftgate
or liftglass is opened. The lamp will turn
off when all doors, the liftgate and lift-
glass are closed.
OFF: In this position, the lamp will be off
at all times, even if a door, the liftgate or
liftglass is opened.
ON: In this position, the lamp will be on
at all times.
See Section 3 of your Owner Manual.
Power Windows (if equipped)
To disable all of the passenger power
window switches, including the passen-
ger window switches on the driver’s
door, press the window lockout button
located near the driver’s power door
lock switches. Press the button again
to enable the window switches.
Only the driver’s window will operate
with the lockout button depressed.
See Section 2 of your Owner Manual.
Automatic Lamp Control (ALC)
During daytime driving, the ALC may
temporarily switch the headlamp and
interior light systems, including the radio
display, to the nighttime mode. This
occurs when passing through darker
conditions, such as under a bridge or
overpass, or inside a parking garage.
The ALC light sensor is located at the
upper-left corner of the instrument panel.
To ensure proper system operation,
avoid placing objects or stickers on the
windshield at the windshield’s upper-left
corner.
See Section 3 of your Owner Manual.
Closing the Sunroof
As a safety measure, the sunroof clos-
ing mechanism is designed to stop in
the middle of its cycle. This prevents
objects from being closed in the sun-
roof. When the sunroof stops and the
opening is clear of all objects, release
the switch and press it again to com-
plete the closing cycle.
See Section 2 of your Owner Manual.
Vibe 2007 A 5/26/06 10:24 AM Page 10