Poray PS-R50B User manual
Poray 3G+11N Wireless Router
1
3G+11N Wireless Router
PS-R50B
User manual
Poray 3G+11N Wireless Router
2
Directory
Packages............................................................................................................................................4
Chapter1 Introductions...................................................................................................................4
Chapter2 Router Introductions.......................................................................................................4
2.1 Introductions............................................................................................................................4
2.2 Features and Specifications......................................................................................................5
2.2.1 Features.................................................................................................................5
2.2.2 Specifications........................................................................................................5
Chapter3 Hardware Installation .....................................................................................................6
3.1 Panel Layout ............................................................................................................................6
3.1.1 The Front Panel.....................................................................................................6
3.1.2 The Rear Panel......................................................................................................8
3.2 Installation Environments ........................................................................................................8
3.3 Hardware Installation steps......................................................................................................9
Chapter 4 Software Configuration.................................................................................................9
4.1 Network.......................................................................................................................................9
4.1.1 WAN Settings........................................................................................................9
4.1.2 MAC Clone.........................................................................................................13
4.1.3 LAN Settings.....................................................................................................15
4.1.4 Wireless Settings...............................................................................................15
4.1.5 Wireless Security.................................................................................................16
4.1.6 Wireless Advanced..............................................................................................17
4.1.7 Wireless MAC Filter.........................................................................................18
4.1.8 Wireless Statistics................................................................................................19
4.1.9 DHCP Server.....................................................................................................20
4.1.10 DHCP Client .....................................................................................................21
4.2 Security..................................................................................................................................21
4.2.1 Firewall Settings..................................................................................................21
4.2.2 ACL Settings.......................................................................................................21
4.2.3 MAC Filtering...................................................................................................25
4.2.4 Domain Filtering.................................................................................................27
4.2.5 IP &MAC Binding ..............................................................................................28
4.2.6 Remote Management ..........................................................................................29
4.2.7 Advanced Security..............................................................................................30
4.3 Tools..........................................................................................................................................31
4.3.1 Time Settings.......................................................................................................31
4.3.2 Password .............................................................................................................31
4.3.3 Backup & Restore...............................................................................................32
Poray 3G+11N Wireless Router
3
4.3.4 Firmware Upgrade ..............................................................................................32
4.4 Advanced...................................................................................................................................33
4.4.1 Dynamic DNS.....................................................................................................33
4.4.2 WDS Settings......................................................................................................33
4.4.3 UPnP Settings....................................................................................................34
4.4.4 Virtual Servers.....................................................................................................35
4.4.5 DMZ Settings......................................................................................................36
4.4.6 Port Triggering....................................................................................................36
4.5 Status......................................................................................................................................38
4.5.1 Status.................................................................................................................38
4.5.2 Client List..........................................................................................................40
4.5.3 Syslog................................................................................................................40
4.6 Help.................................................................................................................................40
4.7 Factory Defaults..............................................................................................................40
4.8 Reboot.............................................................................................................................41
Poray 3G+11N Wireless Router
4
Packages
The following Items should be found in your package:
3G+11N Wireless Router
Power Adapter
Quick Start Guide
Warranty Card
Note: If any of listed Items are damaged or missing, please contact with your distributor.
Chapter1 Introductions
Thank you for your purchase PS-R50B 3G +11N Wireless Broadband Router! PS-R50B 3G+11N
3G wireless router is designed to meet high-speed Internet access needs of the small business,
office and home wireless connection.
Chapter2 Router Introductions
2.1 Introductions
PS-R50B 3G+11N Wireless Broadband Router set of 3G, router, firewall, wired and wireless
network connection functions, it is Designed to meet high-speed Internet access needs of the small
business, office and home wireless connection, it supports mainstream 3G network such as China
Telecom, China Unicom, China Mobile. Several Computers can simultaneously enjoy the fun of
3G wireless high speed Internet access. PS-R50B 3G+11N Wireless Broadband Router provides
multiple and effective protection measures, it supports disable SSID broadcast, supports
64-bit/128-bit WEP data encryption, supports WPA/WPA2 security authentication, can guarantee
the data security in wireless networks.
The transmission speed, PS-R50B 3G+11NWireless Broadband Router based on the IEEE
802.11n standard draft, It can expand the range of the wireless network, provides up to
Poray 3G+11N Wireless Router
5
300Mbps transmission rate, compatible with IEEE 802.11b and IEEE 802.11g standards at
the same time.
PS-R50B 3G+11N Wireless Broadband Router is fully compatible with other manufacturer
device, It has a wide range of applications.PS-R50B 3G+11Nireless Broadband Router provides
Powerful management functions, supports auto PAN, 3G timing Connection, total online time
statistics, the Router can able to fully control the QQ and MSN, webmaster can control the
Internet access of LAN PCs via ACL (Access Control List), in addition, the Router supports
virtual server, DMZ host, UPnP, WDS.
2.2 Features and Specifications
2.2.1 Features
¾Complies with IEEE802.11N, IEEE 802.11g, IEEE 802.11b, IEEE802.3, IEEE802.3u,
transmission rate up to 150Mbps.
¾Supports TD-SCDMA HSPA, WCDMA HSPA, cdma2000 EVDO, CSMA/CD, TCP/IP,
PPPoE, DHCP, ICMP, NAT etc.
¾Provides one 10/100M Auto-Negotiation RJ45 WAN port, four 10M/100M auto-
Negotiation ports, supporting Auto MDI/MDIX.
¾Provides one USB interface, widely supporting a variety of 3G data card.
¾Combined wireless and wired functions.
¾Supports Remote WEB management, remote Telnet.
¾Supports NAT/NAPT, IP sharing, WAN protocols：3G/PPPoE/Static IP/ DHCP.
¾Supports Virtual Servers, DMZ host, UPnP and DDNS.
¾Supports 64-bit /128-bit WEP and WPA-PSK / WPA2-PSK authentication.
¾Supports IP filtering, Domain Name filtering, MAC filtering, can block QQ and MSN.
¾Supports firmware upgrade and Web management.
2.2.2 Specifications
Protocols
IEEE 802.11n, IEEE 802.11g,IEEE 802.11b,IEEE 802.3,IEEE
802.3u,CSMA/CD,TCP/IP,DHCP,ICMP,NAT,PPPoE,TD-HSPA,WCD
MA-HSPA CDMA EVDO
WAN One 10/100M Auto-Negotiation
LAN Four 10/100M Auto-Negotiation ports
Interface
USB One USB 3G Modem interface
Frequency 2.4~2.4835GHzWLAN
Radio Data Rate 11n：270/243/216/162/108/81/54/27Mbps
Poray 3G+11N Wireless Router
6
135/121.5/108/81/54/40.5/27/13.5Mbps
130/117/104/78/52/39/26/13Mbps；
65/58.5/52/39/26/19.5/13/6.5Mbps
IEEE 802.11g：54/48/36/24/18/12/9/6(Auto-Negotiation)
IEEE 802.11b ：11/5.5/2/1M(Auto-Negotiation)
Channel 14
Spread Spectrum DSSS(Direct Sequence Spread Spectrum)
Data Modulation DBPSK, DQPSK, CCK, OFDM(BPSK/QPSK/16-QAM/64
-QAM
Sensitivity @PER
270M：-68dBm@10% PER；130M：-68dBm@10% PER；
108M：-68dBm@10% PER；54M：-68dBm@10% PER
11M：-85dBm@8% PER；6M：-88dBm@10% PER
1M：-90dBm@8% PER
Transmission Rate As far as 10 meters indoors; as far as 360 meters outdoors (due to the
environment vary)
RF Power 20dBm EIRP
Antenna 3dBi High Gain Omni-directional Antenna
Cabling Type 10Base-T: Class 3 or above UTP 100Base-TX:Class 5 UTP
WLAN Link/Act(Linking/Working)
WAN Link/Act(Linking/Working)
LAN Link/Act(Linking/Working)
LED
Other SYS, Power
Dimensions(L×W×H) 186.2 × 119.7 × 26.5(mm)
Operating Environments
Operating Temperature:0℃～40℃;Operating Humidity 10％~90％
No-condensing.
Storage Temperature:-40℃～70℃；Storage Humidity 5 ％~90 ％
No-condensing
Power Supply Adapter Output: DC 12V/1A
Chapter 3 Hardware Installation
3.1 Panel Layout
3.1.1 The Front Panel
Poray 3G+11N Wireless Router
7
PS-R50B Front Panel
Name Action Description
off Power off
Power on Power on
off the Router has a system error
SYS flashing the router is working properly
off the wireless function is disabled
on the Wireless function is enabled
WLAN
off the WPS function is disabled
off there is no device linked to the
corresponding port
on there is a device linked to
corresponding port but no activity
Link／Act
(WAN /Lan1,2,3,4)
flashing there is an active device linked to the
corresponding port
Poray 3G+11N Wireless Router
8
3.1.2 The Rear Panel
The Rear Panel of PS-R50B
Interface Description
WAN blue port is WAN port, 10M/100M auto-negotiation, MDI/MDIX
LAN yellow ports 1,2, 3, 4 are both LAN port, 10M/100M auto-negotiation, MDI/MDIX
Power Power adapter interface, DC 12V, 1A
RESET Reset button, press it at lease 5 seconds to restore factory defaults when power on
USB Standard USB 2.0 interface, connect 3G modem
3.2 Installation Environments
Environment requirements：
¾Place the router level
¾Adjusting the angle of the antenna to right direction
¾Place the router as far as possible away from the heating device
Poray 3G+11N Wireless Router
9
¾Do not place the router dirty or damp places
Recommended environments:
Temperature: 10℃-40℃
Humidity: 5%～90%RH
3.3 Hardware Installation steps
First, please accord to the following steps to complete PS-R50B Wired connection.
1. Creating LAN connection
Using cable to connect the router LAN port to computer NIC, if there is Switch in LAN, first
using cable to connect Router’s LAN to switch, then connecting the Switch port to computer
Network Card.
2. Creating WAN connection
If you use 3G card to connect Internet, Please send wireless card plugged into the USB port
on the router, If you use ADSL to connect Internet, using Cable connect Router’s WAN port
and Ethernet port of xDSL Modem／Cable Modem.
3. Turn on the Router, the router will self-start.
Chapter 4 Software Configuration
4.1 Network
4.1.1 WAN Settings
1. 3G dial-up
If you are 3G Wireless Broadband user, please select 3G Dial-up, then input
the parameters provided by ISP, including APN, Dialup Number, User Name and Password and so
on, For example, if the ISP is China Telecom, Dialup Number is “#777”, User Name is “card”,
Password is “card”, Range Of Online Time is default, leaving DNS field as blank, when Router
connected to Internet, It will fill in the correct DNS server into the DNS address field, click
apply to save your settings.
Poray 3G+11N Wireless Router
10
Parameters:
¾APN - Access Point Name, provided by your ISP.
¾Dialup Number - provided by your ISP.
¾User Name - Enter the user name provided by your ISP.
¾Password - Enter the password provided by your ISP.
¾Range of Online Time -This option can control the Router’s total online time, Can take
advantage of the limited resources of the Internet. The Range Of Online Time has following
options: Always Online, Monday to Friday,Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday, Sunday, Weekend, daily:
zAlways Online +special time - show that the router always online no matter what the
special time is.
zSunday +special time - show that you can connect to Internet only in a special time on
Sunday. other single days is the same as Sunday.
zMonday to Friday +Special time - show that you can connect to Internet only in a special
time on Monday to Friday.
zWeekend - shows that you can connect to Internet only in a special time on Saturday and
Sunday.
zDaily + special time - shows that you can connect to Internet in a special time everyday.
¾Primary and Secondary DNS - leaving it as blank, when the router connected to the Internet,
it will fill in the correct DNS server into the DNS Address field automatically.
Poray 3G+11N Wireless Router
11
Parameters for China ISP(Internet Service Provider)
2. Static IP
When you have the fixed IP parameters given by your ISP, please choose Static IP, the Static IP
settings page will appear, parameters needed to input including IP Address, Subnet Mask,
Default Gateway, MTU, Primary DNS, secondary DNS, if you don’t know these parameters,
please contact with your ISP in local.
¾IPAddress- enter the IP address in dotted-decimal notation provided by your ISP.
¾Subnet Mask -enter the subnet mask in dotted-decimal notation provided by your ISP,
usually is 255.255.255.0.
¾Default Gateway - (Optional) Enter the gateway IP Address in dotted-
decimal notation provided by your ISP.
¾MTU - the normal MTU (maximum transmission Unit) value for most Ethernet
networks is 1500 Bytes, it is not recommended that you change the default MTU size
unless required by your ISP.
¾Primary and Secondary DNS - (Optional) enter one or two DNS addresses in
dotted-decimal notation provided by your ISP.
ISP 3G Standard APN Dial-up Number User Name Password
China Unicom WCDMA 3gnet *99#
China Mobile TD-SCDMA cmnet *99# or *98*1# card card
China Telecom EVDO #777 card card
Poray 3G+11N Wireless Router
12
3. Dynamic IP
If your ISP provides the DHCP service, please choose Dynamic IP connection, the Router will
automatically get IP parameters from your ISP, the page as below:
¾MTU - the normal MTU (maximum transmission Unit) value for most Ethernet
networks is1500 Bytes, it is not recommended that you change the default MTU size
unless required by your ISP.
¾Host Name - (optional) usually leaving this field blank will work.
¾Primary/Secondary DNS - (Optional) Enter one or two DNS addressed in dotted
decimal notation provided by your ISP.
when you complete the settings, click Apply to save these configurations, then click
Status >WAN Status, click Renew button, you will obtain an new IP address from ISP.
4. PPPoE
If you choose PPPoE, you should enter the following parameters, the page as follows:
Poray 3G+11N Wireless Router
13
¾PPPOE User Name - enter the username provided by ISP, these fields are case-
Sensitive.
¾PPPoE Password - enter the username provided by ISP, these fields are case-
sensitive.
¾MTU - the normal MTU (maximum transmission Unit) value for most Ethernet network
is 1500 Bytes, it is not recommended that you change the default MTU size unless required
by your ISP.
¾Service Name - the service name should not be configured unless you are sure it is necessary
for your ISP, in most cases, leaving these fields blank will work.
¾Primary/Secondary DNS - If your ISP does not automatically assign IP address during login,
please fill in the DNS IP address to the field.
Next step, click Status > Running Status, you will see the current connection type is PPPoE, then
click Connect button, If you can see the IP address, Subnet Mask, Default Gateway appear, OK,
the PPPoE connection is active, click the Disconnect button to disconnect current PPPoE
connection.
4.1.2 MAC Clone
Choose Network > MAC Clone, you can configure the MAC address of the WAN on the screen
below:
Poray 3G+11N Wireless Router
14
¾Use the WAN MAC Address - this is default option, it displays current MAC address
of the WAN port.
¾Use your PC’ s MAC Address - this filed displays the MAC address of the PC that is
managing the Router, If your ISP requires you to register the MAC address, please choose
this option, click apply button to save settings, then the MAC address of WAN port
changed to your PC’s MAC address.
¾Use the Following MACAddress - some ISP requires binding MAC address, only special
MAC address can access to network, so you should enter the MAC address provided by
ISP in this field, click apply button, then the MAC of WAN port address changed to this
MAC address.
Poray 3G+11N Wireless Router
15
4.1.3 LAN Settings
Choose Network > LAN Settings, you can configure LAN parameters, you can
also modify these parameters according to your need, you may can not access the router’s WEB
page when you modified the LAN IP address, don’t worry, you can modify your PC’s IP address
as same subnet as gateway
¾LAN IPAddress - Enter the IP address of your router (factory default:192.168.1.1).
¾Subnet Mask - An address code that determines the size of the network, normally use
255.255.255.0 as the subnet mask.
Note:
1. If you change the IP address of LAN, you must use new IP address to login the router.
2. If the LAN IP address you set is not in the same subnet, the IP Address pool of the DHCP
server will change accordingly at the same time, while the Virtual Server and DMZ Host will
not take effect until they are re-configured.
4.1.4 Wireless Settings
Choose Network > Wireless Settings, you can configure basic wireless parameter.
¾Mode - This field determines the wireless mode which the Router works on, there are five
options, the default value is 802.11b/g/n.
z802.11b only-the Router works on 802.11b only.
z802.11g only-the Router works on 802.11g only.
z802.11b/g mixed-the Router works on 802.11b/g.
z802.11g/n mixed-the Router works on 802.11g/n.
z802.11b/g/n mixed-the Router works on 802.11b/g/n.
Poray 3G+11N Wireless Router
16
¾SSID - (Service Set Identification), must be assigned to all wireless device
s in your network, the default SSID is set to POSTAR 3G ROUTER, you
can change it to another.
¾Channel - This filed determines which operating frequency will be used,
the default channel is set to 6.it is not necessary to change the wireless channel unless
you notice interference problems with another nearby access point.
¾Hide SSID - When wireless clients survey the local area for wireless networks to associate
with, they will detect the SSID broadcast by the Router, if you select the Hide SSID, the
Wireless Router will not broadcast its name (SSID) on the air.
4.1.5 Wireless Security
You can configure the security settings of your wireless network, there are five wireless
security modes supported by the router: Disable, OPEN, WEP (Wired Equivalent Privacy),
WPA-PSK (Pre-Shared Key), WPA2 -PSK (Pre-Shared Key), WPA-PSK/WPA2-PSK.
¾Security Mode - The Router working mode, default value is Disable, disable means this WEP
key entry is invalid.
¾Key Length - You can select the WEP key length.
¾Key Format - ASCII and Hexadecimal formats are provided, ASCII format stands for any
combination of keyboard characters in the specified length; Hexadecimal format stands for
any combination of hexadecimal digits(0-9, a-f, A-F) in the specified length.
¾Default Key ID - Index number, default is Key1.
¾Key1—Key4-Respectively, corresponding to the key areas of the input.
1. Disable - If you don not want to use wireless security, select this option, but it’s recommended
strongly to choose one of the following modes to enable security.
Poray 3G+11N Wireless Router
17
2. OPEN - It is a handshake way of WEP encryption, through the WEP key to encrypt.
3. WEP-AUTO -This filed shows that it can select Shared Key or Open System
authentication type automatically based on the wireless station’s capability
and request.
4. WPA-PSK - (Pre-shared Key of WPA), you can select WPA-PSK, automatically call based on the
wireless station’s capability and request, the page as follows:
¾Security Mode - Select WPA-PSK.
¾WPA Encryption - There are three WPA encryption: TKIP, AES, TKIP/AES(auto)
¾Group Key Update Period - Default value is 3600 seconds, 0 second means don’t update.
¾PSK Password - Enter PSK password, you can enter ASCII characters between 8-63
Hexadecimal 64 characters.
5. WPA2-PSK - It’s the WPA/WPA2 authentication type based on pre-shared
Pass phrase, the settings as same as WPA-PSK.
6. WPA-PSK / WPA2-PSK - The router can select WPA-PSK or WPA2-PSK automatically based
on the wireless station’s capability and request.
4.1.6 Wireless Advanced
Choose Network > Wireless Advanced menu, you can configure the advanced settings of your
wireless network, the page as follows:
Poray 3G+11N Wireless Router
18
¾BG Protection Mode – there are on, off orAuto.
¾Fragment Threshold-This value is the maximum size determining whether packets will be
fragmented, setting the Fragmentation Threshold too low may result in poor network
performance since excessive packets.2346 is the default setting and is recommended.
¾RTS -Threshold-Here you can specify the RTS(Request to Send)threshold
if the packet is larger than the specified RTS Threshold size, the router will send RTS frames
to a particular receiving station and negotiate the
sending of a data frame. The default value is 2347.
¾Beacon - Enter a value between 20 and 999 for Beacon Interval here, the beacons are the
packets sent by the router to synchronize a wireless network. Beacon Interval value
determines the time interval of the beacons. The default value is 100.
¾DTIM -This value determines the interval of the Delivery Traffic Indication Message (DTIM).
A DTIM field is a countdown field informing clients of the next windows for listening to
broadcast and multicast messages. When the Router has buffered broadcast or multicast
messages for associated clients, it sends the next DTIM with a DTIM Interval value, you can
specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates the
DTIM interval is the same as Beacon Interval.
¾RF Power - Indicates the Power capacity of broadcasting the SSID, the greater the value, the
stronger the single the default value is 100 (maximum).
4.1.7 Wireless MAC Filter
This function is use to control the wireless clients access the Internet via wireless MAC address.
The page as follows:
Poray 3G+11N Wireless Router
19
¾Filter Mode- There are three options: Disable, Only Allow, Only Deny, default value is
Disable, Disable shows that the MAC filtering function is invalid.
zOnly Allow -Those wireless MAC clients already added to the list can access the Internet.
zOnly Deny - Those wireless MAC clients already added to the list can not access the Internet.
¾MAC Address -The wireless station’s MAC address that you want to filter.
¾User Name - A simple description of the wireless station.
For example :If you desire the wireless station with MAC address 00:03:25:5A:19:ce,
(username is Gateway) is able to access the router, but the other wireless stations cannot access the
router, do as follows:
1. select “OnlyAllow” in Filter Mode box.
2. enter MACAddress in MAC Address box
3. enter “Gateway” in User Name box.
4. click the Add To List button to add the entry.
5. click the Apply button to save the entry.
4.1.8 Wireless Statistics
Select “Network-Wireless Statistics”, you can see current wireless clients connected to the Router,
the page as follows:
Poray 3G+11N Wireless Router
20
4.1.9 DHCP Server
Select Network > DHCP Server, you can configure DHCP (Dynamic Host Configuration
Protocol) Server on this page, the Router is set up by default as a DHCP server, which provides
the TCP/IP configuration for all the PC(s) that are connected to the router on the LAN.
¾DHCP Server - Enable or Disable the DHCP server, if you disable the server,
you must have another DHCP server within your network or else you must manually
configure the computer.
¾Start IP Address - This field specifies the first of the addressed in the IP address
pool.192.168.1.100 is the default start address.
¾End IP Address - This field specifies the last of the addressed in the IP address
pool.192.168.1.150 is the default end address.
¾Address Lease Time - the amount of time in which a network user will be allowed connection
to the router with their current dynamic IP Address. Enter the amount of time, in minutes.
The user will be leased this dynamic IP address, the default value is 3600 minutes.
¾Default Domain - (optional) Enter the domain name of your network.
¾Primary / Secondary DNS - Enter the DNS address provided by your ISP.
Table of contents
