poss PSM100 User manual

CMI, TSA 91431 – 91343
MASSY CEDEX - FRANCE
PSM100
We are delighted that our product becomes yours, thank you.
GBGB
GE
IN

GB-1
Safety precauon
• Read, keep and follow these instrucons.
• Heed all warnings on the product and in the instrucon manual.
• For your safety, read and follow this manual carefully to ensure proper use of the
product and avoid any danger or physical damage.
• The apparatus shall not be exposed to dripping or splashing.
• Do not disassemble the products or remove any parts.
• Prevent the product from drops or strong impacts.
• Do not disassemble, repair or modify the product by yourself.
• Do not put the products into water or any liquid.
• Do not plug or unplug USB port with wet hands – risk of electric shock.
• Do not put the products close to heat source or expose to high temperature.
• The baery must be removed from the appliance before it is scrapped.
• Baeries are to be inserted with the correct polarity.
• Make sure that the (+) and (-) terminals are placed in the correct direcon.
• Do not mix used and new baeries or baeries of dierent types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Never use baeries that show signs of electrolyte leaks or cracking.
• Never dispose of used baeries in an open re, risk of explosion.
• Keep baeries out of reach of children.
• Never short circuit baery terminals.
• Exhausted baeries are to be removed from the product.
• Remove baeries from the appliance before disposing of it at the end of its
service life, or during long periods of non-use.
• Do not try to open the baeries.
• Baeries (baery pack or baeries installed) shall not be exposed to excessive
heat such as sunshine, re or the like.
• Ensure the baery compartment panel is secure.
• Danger of explosion if baery is incorrectly replaced.
• Replace only with the same or equivalent type.

GB-3GB-2
Warning and IMPORTANT:
• When replacing used baeries, please comply with applicable regulaon relang
to their disposal.
• Please return them to a suitable collecon facility for environmentally friendly
disposal.
• Do not charge non-rechargeable baeries.
• The baery is to be disposed of safely.
• Baery contains materials which are hazardous and harmful for the environment.
• When disposed the baery, do not short circuit the + and - terminals of the baery.
• Dispose of the used baeries according to the instrucon.
• Wireless Mouse x1
• USB receiver x1
• Instrucon manual x1
• Baeries (LR03 / AAA)
• 2.4GHz Wireless connecvity
• Mouse resoluon:1200 DPI
• Wireless receiver stores safety when not in use
• 3 buons, including scroll-roller
• Works on most surface, including the wood and plasc.
• System requirements:Windows XP/Vista/7/8/10
• Auto standby to conserve baery life
• Power on/o switch on base of mouse
• Workable range 10 meter
• Frequency range: 2409 to 2476 MHz
• Max transmit power: <10dBm
1. Open the baery compartment and take out the 1xAAA baery, and tear o the
baery’s protecve lm, then insert the baery, ensuring polarity is correct.
2. Take out the USB receiver
3. Close baery compartment
4. Plug in USB receiver
5. Turn on the switch
6. Wireless mouse is ready to work
If the above steps do not work properly, please remove USB receiver and repeat
these steps.
1. If your mouse does not respond, make sure that the baery + and - contacts on
the baery are in the correct posions.
2. If your mouse does not respond, make sure the ON/OFF switch on the underside
of the mouse to the ON posion.
3. Make sure the USB DONGLE is nearby and accessible.
4. Keep your mouse away from direct sunlight, moisture and abrasive chemical
products (cleaning products etc).
5. To ensure opmal performance, use your mouse on a clean surface.
6. Some surfaces that reect light, such as glass, may cause the cursor to jump,
If this occurs, change the type of surface used for the mouse.
Package contents
Features
Technical specicaon
Installaon and maintenance
Trouble shoong
Congratulations
Congratulation on your purchase. For a better use of your new device, we
recommend you to read carefully this user manual and keep it for record.

GB-4
Recycling
Processing of electric and electronic equipment at the end of their service life
(applicable in member countries of the European Union and other European
countries operating a selective waste collection system).
This symbol, affixed to the product or its packaging, indicates that the product
must not be processed with household waste. It must be brought to an electric
and electronic waste collection point for recycling and disposal. By ensuring the
appropriate disposal of this product you also help in preventing potentially negative
consequences for the environment and human health. The recycling of materials
helps preserve our natural resources. For further information regarding
the recycling of this product, please contact your municipality, local waste
disposal centre or the store where the product was purchased.
Net Weight: 73g
Additional Information
An alternative format of this instruction manual is available upon request to the
Carrefour Customer Service.
Hereby, CMI declares that the radio equipment type
PSM100BU/PSM100WH/PSM100GN/PSM100PK/PSM100GY
Wireless mouse is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://mycarrefourdocs.com/search/PSM100
Symbols Explanaon
DC voltage
Symbols
Trademarks
POSS is a registered trademark of Carrefour group. All other company names
are trademarks, registered trademarks or service marks of their respective owners.
V1117
Table of contents
Other poss Mouse manuals