PotteryBarn Trigger Lift Cantilever umbrella User manual

Assembly instructions
Tiles not included Patented product
Thank you for your purchase
Stores/ catalog/ www.potterybarn.com
Tools Required:
Wrench (5mm) (1x) Wrench (6mm) (1x) Bolt (M8x30mm) (4x) Bolt (M8x13mm) (4x)
Cover (1x)
Cover ring (1x) Rotation mechanism (1x) Steel plates D (1x)
Parts Required:
Hardware Enclosed:
Stem (1x)
A
CD E
F
Tile (4x)
(Separate pack)
G
Steel plates E (1x)
a b c d
Assembly Instructions:
1. Cross the steel plates (D) and
(E) as shown on figure.
2. Put on the rotation mechanism (C)
and secure to the steel plates with
steel bolts (c) of M8X30mm
by wrench (6mm)
3. Attach on the stem (F) and secure with
steel bolts (d) M8X13mm
by wrench (5mm)
4. Insert the cover (B) to the stem,
then put on the Tile.
5. Insert the cover ring (A) to the bottom of
umbrella pole first for easy installation purpose,
and then attach the umbrella pole to the stem.
DE
BA
B
Tile
b
c
C
a
F
d
Tightening knob (1x)
H
H
6. After umbrella pole has been inserted into base,
Part-H must be tightened to prevent umbrella
from being lifted out by wind.