PowerAcoustik PACD-888R User manual

PowerfflHDQMlGi
PACD-888R
INSTRUCTION MANUAL
ANTI-THEFT FLIP DOWN DETACHABLE SYSTEM
AUTO-LOADING COMPACT DISC PLAYER
AM/FM STEREO WITH DIGITAL TUNING RADIO

DEAR CUSTOMER
Selecting fine audio equipment such as the unit you have just purchased is only the start
of your musical enjoyment. Now it is time to consider how you can maximize the fun and
excitement your equipment offers.
We want you to get the most out of your equipment by playing it at a safe
level. One that lets the sound come through loud and clear without annoying blaring or
distortion - and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing " comfort level " adapts to higher volumes
of sound. So what sounds " normal " can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
. Start your volume control at a low setting
. Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion we want you listening for a lifetime.
Once you have established a comfortable sound level:
. Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the
future. After all, we want you listening for a lifetime.
ABOUT THIS MANUAL
This product features a number of sophisticated functions ensuring superior reception and
operation. All are designed for the easiest possible use, but many are not self-explanatory.
This operation manual is intended to help you benefit fully from their potential and to
maximize your listening enjoyment.
We recommend that you familiarize yourself with the functions and their operation by reading
through the manual before you begin using this product. It is especially important that you
read and observe the " precaution " on the next page and in other sections.
In this operation manual, the Basic Operation for each sound source is outlined at the
beginning of its explanation, covering simple operation for that source, such as merely playing
music.
IMPORTANT:
This radio is set to USA frequency by factory, if European
frequency is required please flip the frequency step switch on
the side of the unit.
After the switchover of the frequency switch, the frequency convert
function will not be valid until the RESET button has been pressed.
1

DISC PLAY:
Cleaning discs
Before playing, clean the disc with a clean, lint-free.
Flip the disc in the direction of the arrow.
NOTE:
.Do not use so solvents such as benzine, thinners. Commercially available
cleaners or anti static spray damage the unit.
Insert a disc with the label surface down. Doing so may damage the unit.
Label
surface up
NOTE:
.Do not try to insert another disc when one has been already inserted.
Doing so may damage the unit.
.Handle the disc by its edge. And to keep the disc clean, do not touch
the surface.
.Do not stick paper or tape on the disc.
.Do not expose the disc to direct sunlight or heat sources such as hot air
ducts. Or leave it in a car parked in direct sunlight where there can be a
considerable rise in temperature.
2

LOCATION AND FUNCTION OF CONTROLS
1. SEL( AUDIO MODE SELECT)/VOLUME +/- BUTTONS
Press SEL button to change the mode in sequence as follow:
1) . The volume level can be adjusted at any time by pressing the audio level
+/- button as select mode has been initially defaulted at volume mode.
2) . The volume level is also obtained by stepping through the SEL button until
the word VOL is displayed and then press +/ - button to adjust the
sound level.
3) . Press and hold the +/ - button to adjust the sound level.
BASS CONTROL
1) . Press the SEL button to select the bass mode until BAS appears on LCD.
2) . Press +/ - button to adjust the bass effect.
TREBLE CONTROL
1) . Press the SEL button to select the treble mode until TRE appears on LCD.
2) . Press +/ - button to adjust the treble effect.
3

BALANCE CONTROL
1) . Press the SEL button to select the balance mode until BAL appears on LCD.
2] . Press the +/- button to adjust the volume balance of left and right speaker.
FADER CONTROL
1] . Press the SEL button to select the fader mode until FAD appears on LCD.
2) . Press the +/ - button to adjust the volume balance of front and rear
speaker.
2. OPEN BUTTON
Press it to flip down the front panel, then you can insert a disc into the slot
or press the EJ button to eject the disc or take away the front panel.
3. POWER BUTTON
Press the button to turn on or off the unit,
4.5. PRESET STATION [ 1-6 ] / TOP, RPT, INT, RDM BUTTONS.
A] . To memorize the current frequency, press and any one of the six preset
buttons for more than 2 seconds.
B] . To recall the preset memory, press one of the preset button [1-6].
C] . TOP BUTTON
Press the button during playback to return to the first track of CD.
D] . REPEAT BUTTON
Press the button to continuously repeat same track. Press again to
stop repeating.
E] . INT: Preview all tracks
Press INT to play first ten seconds of each track on current CD. Press again
to stop scan and listen to track.
F] . Random button: play all tracks
Press it to play all tracks on CD in random order. Press again to stop
random play
6. LCD [ LIQUID CRYSTAL DISPLAY)
7. CLOCK ADJUSTMENT BUTTON
During TUNING or CD state, press the button to change to clock function.
Then press and hold this button until time flashes on LCD.
Now you can adjust Hours or Minutes by pressing UP or DN button.
After completed this operation, press CLK button to remain adjustment.
4

8. LOUD( LOUDNESS) BUTTOM
Press "LOUD" to enhance the bass sound effect while reduce the volume
to half level.
9. INFRA-RED RECEIVING WINDOW
10. BAND BUTTON
At CD mode, press it to switch to radio mode. At radio mode, Press it
to select your desired radio band and word which band is selected will be
displayed on LCD.
11. CD MO ( CD PLAY, PAUSE) BUTTON
At tuner mode, press MO button to switch to CD mode. At CD mode,
press it to pause the CD program and press it again to resume CD
playback.
12. MUTE BUTTON
Press this button to eliminate the sound temporarily. Press it again to
resume playing state.
13. DSP[ DISPLAY) BUTTON
Press it to switch between 4 preset equalizer curves: FLAT POP, CLAS,
ROCK. The sound quality will be changed.
14. AS/PS BUTTON
Press it to perform all stations memory for 5 seconds each time. While mem¬
ory digital and frequency will flash on LCD. If the button is pressed for more
than 2 seconds, it will seek station on current band, then write to the preset
memories. When the auto-storage operation is completed, it will automatically
perform for 5 seconds each time, during the memory station performing, press
1-6 digital buttons to select and stop scanning function.
5

15. [TUNE/SEEK UP] BUTTON and TRACK UP BUTTON
1) . The frequency scans up by one step when pressing UP button once (50k for Europe. 2 0 0k for USA].
Hold it for more than 2 seconds to seek for a station of higher frequency.
2) . During CD mode, press UP button allow you to track forwards.
Hold the UP button allow you to skip forwards.
[TUNE/SEEK DOWN] BUTTON and TRACK DOWN BUTTON
1 ) . The frequency scans down by one step when pressing DN button once(50k for Europe,200k for USA).
Hold it for more than 2 seconds to seek for a station of lower frequency.
2) . During CD mode, press DN button allow you to track backwards.
Hold the DN button allow you to skip backwards.
REMOTE CONTROL BASICS BATTERY REPLACEMENT:
1. R e m o v e the battery holder as the direction indicated by the arrow.
2. R e p l a c e the battery Set a new battery properly with [+)side up as illustrated.
3.Insert the battery holder. Push in the holder to the original position.
NOTE ON BATTERIES:
Old batteries must immediately be removed and disposed.
BATTERY INFORMATION:
Designated Battery: UM-4"AAA"/R05
Battery Life: 6 months with normal use (in normal room temperature)
CAUTION:
Improper use of batteries may cause overheating, explosion or ignition. Resulting in
jury or fire .Battery leakage may cause damage to the unit.
Do not disassemble or short the batteries. Do not throw the batteries into the fire.
To avoid the risk of accident, keep the batteries out of reach of children.
BATTERY
6

TROUBLE SHOOTING
Before going through the check list, wiring connection, should any of the
problem persist after check list has been made, consult your nearest service
dealer.
Symptom
Cause
Solution
No power
The car ignition is not on.
If the power supply is properly
connected to the car accessory
switch the ignition key to " ACC "
The fuse is blown
Replace the fuse
Disc cannot
be loaded or
ejected
Presence of CD disc inside
the player
Remove the disc in the player
then put a new upward
Inserting the disc in upside
down
Insert the compact disc with
the label facing upward
Compact disc is extremely
dirty or defective
Clean the disc or try to play a
new one
Temperature inside the
car is too high
Cool off until the ambient
temperature returns to normal
Condensation Leave the player off for an
hour or so, then try again
No sound
Volume is in minimum
Adjust volume to a desired level
Wiring is not properly
connected
Check wiring connection
The operation
keys do not
work
The built-in microcomputer
is not operating properly
due to noise
Press the RESET button
front panel is not properly
fix into its place
Sound skips
The installation angle
is more than 30 degrees
Adjust the installation angle
to less than 30 degrees
The disc is extremely
dirty or defective
Clean the compact disc/try to
play a new one
The radio does
not work
the radio
station
automatic
selection does
not work
The antenna cable is not
connected
the signals are too weak
Insert the antenna cable firmly
select a station manually
7

SPECIFICATION
GENERAL
Power requirement.DC 13.8V.
Current consumption.7A MAX.
Power output.4 X 40W
FM SECTION
Frequency range.87,5MHz -108.0MHz(EUR0PE).
Frequency range.87.5MHz -107.9MHz[USA).
Usable sensitivity. I O u V .
I.F Frequency.10.7MHz.
AM(MW) SECTION
Frequency range.522KHz - 1620KHz(EUR0PE).
Frequency range. 530KHz - 171 OKHz[USA).
LINE - OUT [OPTION]
Output.
Impedance.
CD PLAYER
System.
Usable disc.
Signal format.
Frequency characteristics,
1000mV @ FM 10% THD POWER.
.600 ohm.
...compact disc audio system.
.compact disc.
.sampling frequency 44.1 KHz.
No of quantization bits Ibit.
.5-40Hz^ 5dB
10K-20KHz« 5dB.
Signal to noise radio.70dB [IKHz] [IEC - A net work].
Number of channels.2 STEREO.
Chassis dimensions.182[W] X 53[H] X 165[D].
8

INSTALLATION
While installing the front panel,
please mount the left side first,
then push the right side.