PowerNet 1031 User manual

INSTRUCTIONS
1031| 7X7 GOLF NET
WWW.POWERNETINC.NETPOWERNET,INC@POWERNET_BASEBALLPOWERNETBASEBALLNET
13959 CENTRAL AVENUE•CHINO•CA•91710 • 909.203.5495
PowerNet Inc. is dedicated to providing quality products at affordable prices. Our goal is to develop the
skills of the young, old, seasoned and professional athletes through training, reps and practice. Further
building confidence leading to consistent winning performance.
Using PowerNet’s equipment indoors and outdoors creates better players. PowerNet gives the
opportunity to have the accessibility to practice anywhere with our nets and equipment. We believe
that using the process of integrating practice in your daily lives allows you to mold the next generation
into professionals & professionals into icons through their performance. Separating the best players
from the good by providing life skills for the future.
Out Work!
Out Play!
Thank you for choosing Powernet
Our Vision
Other Items Available:
Micro Heavies
Out Work! Out Play!
Caddy -Wheeled

EASY SETUP & EASY TEARDOWN
INSTRUCTIONS
2. Slip the bottom of the net
sleeve over the middle bar.
6. Insert one upper fiberglass pole
into each lower fiberglass pole.
1031 | 7X7 GOLF NET
GOLF
CHECK OUT OUR VIDEO INSTRUCTIONS AT:
WWW.POWERNETINC.NETPOWERNET,INC
PARTS LIST
(1) NET
(2) MIDDLE BAR
(2) BASE LEG
(2) LOWER POLE
(2) UPPER POLE
(4) GROUND STAKE
(1) CARRY BAG
2. 4.
3.
6.
WARNING:
• Use adult supervision and follow instructions
when using and setting up the net.
• Frequent use and/or abuse will eventually
strain the net and will cause breakage.
Out Work! Out Play!
5. Repeat Step 4 for opposite side with second lower
fiberglass pole.
5.
7. Standing by the net, on one side, slide sleeve up and pull one
fiberglass pole towards yourself and hook the white loop on net
around the silver notch.
7.
4b. Then insert fiberglass
pole into the same side’s
base leg post.
8. Repeat Step 7 for
opposite side’s second
white loop.
8.
LOAD
4a. Slip one net sleeve
over one of the lower
fiberglass poles.
3. Insert middle bars
into each base leg and
snap into place on both
sides.
UPPER POLES
LOWER POLES
NOTE: Use the sleeve
without the PowerNet logo.
WARNING: Don’t stand in direction of the pole’s load when
bending. The pole may snap back and cause injury.
1.
1. Attach male middle bar to the female
middle bar and snap into place.