PowerShield PSRK User manual

This installation guide contains safety and installation
instructions for the PowerShield Rack Mount Rail Kit.
Please read and follow the instructions step by step to
secure your rack mount UPS to your rack system.
WARNING! Handling Safety
PLEASE Do not lift heavy loads without assistance.
Very Important !
The warranty of this product is 2 years.
In order to validate the product warranty, it is essential that you register
your product on line.
Please visit PowerShield online at
www.PowerShield.com.au.product-registration.php
1 Package Contents
Left rail slider x 1 and Right rail slider x 1
Nut M6 x 2
Screw M6 x 12
Specification: 475mm to 700mm @ 75Kg
Full extension: 785mm
2 Assembly Steps
Step 1: Use 4 screws to mount right and left rail sliders in front. See chart below:
PowerShield Rack Mount Rail Kit (PSRK)
Installation Guide
V. 1.0
Nut M6
Screw M6
Right rail slider
Left rail slider
Screw driver

Step 2: Use 4 screws to mount rail sliders in back. See chart below:
Step 3: According to UPS height, put nuts on proper location.
Step 4: Put UPS on the rail support
Step 5: Fix the UPS in position with screws
Step 6: Assembly complete
Nut
Nut