The Entry Series® PPC7PS13B4M is a 7-output
passive device that provides broadband and
MoCA connectivity while limiting return noise
ingress.
The Passive MoCA Portal has three broadband
ports and four MoCA-only ports. The broadband
ports are to connect to things like DVR’s, WIFI
and other devices that need direct access to the
signals on the cable network.
The MoCA-only ports are to connect to those
devices that only use MoCA signals. MoCA
traffic can travel freely between the MoCA only
and broadband ports providing DVR
connectivity.
MoCA traffic is kept off the cable/access
network with more than 40 dB MoCA isolation
at the input.
- -
Installation Guide
Contents
Contents in shipping bag/box:
• PPC7PS13B4M Passive Portal 7-way,
• Two mounting screws
Required Tools
• Philips or straight-blade screwdriver or ¼”
hex-head nut driver to mount the unit.
• Open ended 7/16” torque wrench
appropriate for F-connectors.
This Guide is intended to be used in conjunction
with the Cable Operators’ standard operation
instructions and policies, it does not take
precedence.
This product may be protected by one or more
patents. For further information, please visit:
www.ppc-online.com/patents
Grounding/Termination
For 6 AWG wire torque the ground
screw to 35 in-lbs.
For 14AWG wire torque the ground
screw to 20 in-lbs.
All unused ports should be
terminated into 75 ohms.
Connection Guide
To those devices using only MoCA signals
From
Tap
Low-loss
Port
High-loss Ports
To WIFI, DVR’s or other devices
needing cable network signals
Passive MoCA
Portal – 7 way
