Premier Mounts Convergent UNI-UPS-A CLD User manual

Installation Guide
UNI-UPS-A CLD -
www.premiermounts.com | North America 800.368.9700 | International [phone] Page 1
A B C D E F
2 HIGH
2 WIDE
3 WIDE
3 HIGH
4 HIGH
5 HIGH
A
A
A
A
B
C
C
B
D
D
E / F F / E
Attachment Brackets
*The following bracket are only use to
join two cladding together.
Extension Brackets*
CLD-UNI-UPS-A
Unilumin UpanelS Convergent
Mount Cladding Kit
9500312 v2.0
publ. 04/03/20

Installation Guide
- UNI-UPS-A CLD
www.premiermounts.com | North America 800.368.9700 | International [phone]
Page 2
Upper Rear
Left View
LEFT AND RIGHT SIDE CLADDING
EXTENSION BRACKETS LOCATION
Assemble the side
cladding with the brackets
attached then proceed to
mounting into place.
(2) 10-32 Locknuts
and washers
10-32 x 3/8” Flat
Head Screws
10-32 x 3/8” Truss
Phillips Screws
B or C
Notes: Use the Mirrored Bracket
when installing on the opposite side
Notes:
Use the Mirrored Vertical Extension
Brackets if the Horizontal Rail are
installed on reversed side.
Vertical Extension Vertical Extension
Alternative
Rail location
Horizontal Extension
Only use Corner Bracket for installing
the Top/Bottom to the side claddings.
Top/Bottom (if applicable) requires the
side cladding installed.

Installation Guide
UNI-UPS-A CLD -
www.premiermounts.com | North America 800.368.9700 | International [phone] Page 3
Left Rear
Middle View
Upper Rear
Middle View
VERTICAL EXTENSION
HORIZONTAL EXTENSION
10-32 x 3/8” Truss
Phillips Screws (4) 10-32 Locknuts
and washers
(6) 10-32 x 3/8”
Flat Head Screws
Notes: Horizontal Rail
installed on either side.
Shown on bottom row for
visual clarity.
D
E F