PRESONUS STUDIO ONE ARTIST Guide

GETTING STARTED
WITH
STUDIO ONE
ARTIST
© 2009, PreSonus Audio Electronics, Inc.
All Rights Reserved.

T A B L E O F C O N T E N T S
Studio One Artist Features ......................................3
System Requirements ..............................................4
Installation and Authorization .................................5
Enabling Your Audio Driver ....................................9
Configuring Your External MIDI Devices...............11
Configuring Your Audio I/O...................................16
Creating a New Song ............................................19

FEATURES
3|
PreSonus 2009
All PreSonus audio interfaces now include PreSonus Studio One
Artist recording software, which comes with over 4 GB of plug
ins, loops, and samples, giving you everything you need for music
recording and production.
Summary of Studio One Artist features
•Unlimited track count, inserts and sends
•20 highquality native effects plugins
•Amp Modeling (Ampire)
•Delay (Beat Delay)
•Distortion (Redlight Distortion)
•Dynamic Processing (Channel Strip, Compressor, Limiter,
Tricomp)
•Equalizer (Channel Strip, Pro EQ)
•Modulation (Autofilter, Chorus, Flange, Phaser, XTrem)
•Reverbs (MixVerb, Room Reverb)
•Utility (Binaural Pan, Mixtool, Phase Meter, Spectrum
Meter, Tuner)
•Over 4 GB of loops, samples, and instruments, featuring:
•Presence: Virtual Sample Player
•Impact: Virtual Drum Machine
•SampleOne: Virtual Sampler
•Mojito: Virtual AnalogModeled Subtractive Synthesizer
•Innovative and intuitive MIDI mapping
•Powerful draganddrop functionality for faster workflow
•Mac OS X and Windows compatible

SYSTEM REQUIREMENTS
4|
PreSonus 2009
•Macintosh
oMac OS X 10.4.11 or Mac OS X 10.5.2 or higher
oMinimum Hardware:
•PowerPC G4 1.25 GHz or Intel Core Solo 1.5
GHz processor
•1 GB RAM
•DVD drive
Recommended:
•PowerPC G5 or better or Intel Core Duo or Intel
Xeon processor or better
•2 GB or more RAM
•DVD drive
•Windows PC
oWindows XP SP2 or later or Vista
oMinimum Hardware:
•Intel Pentium 4 1.6 GHz processor or AMD
Athlon 64 (Turion)
•1 GB RAM
•DVD drive
Recommended:
•Intel Pentium 4 2.8 GHz EM64T or better or
AMD Athlon 64 3000+ or better
•2 GB or more RAM
•DVD drive
NOTE: The speed of your processor, amount of RAM, and size
and speed of your hard drives greatly affect the overall
performance of your recording system. A more powerful system
(faster processor with more RAM) allows for lower latency
(signal delay) and better overall performance.

IN ST A L L A T I O N &
AU T H O R I Z A T I O N
5|
PreSonus 2009
Every PreSonus interface comes complete with Studio One
Artist recording software. Whether you are about to record
your first album or your 50th, Studio One Artist provides you
with all the tools necessary to capture and mix a great
performance. As a valued PreSonus customer, you are also
eligible for an upgrade discount for Studio One Pro when you
are ready to master your work, create a digital version for the
Web, or incorporate thirdparty VST plugins into your
recording process. For more details on the Studio One Pro
upgrade program for PreSonus customers, please visit
www.presonus.com.
Once you have installed your PreSonus interface’s drivers and
connected your interface, you can use the PreSonus Studio One
Artist musicproduction software included with your Presonus
interface to begin recording, mixing, and producing your music.
To install Studio One Artist, insert your installation disc into
your computer’s DVD drive. Follow the onscreen instructions to
complete the installation process.
To Install Studio One Artist, insert your Studio
One Artist installation DVD into your
computer’s DVD drive.
PC Users: Launch the Studio One Artist
installer and follow the onscreen instructions.
Mac Users: Simply drag the Studio One Artist application into
the Applications folder on your Macintosh HD.

IN ST A L L A T I O N &
AU T H O R I Z A T I O N
6|
PreSonus 2009
Creating a User Account
After installing Studio One Artist, launch
the program, and the Activate Studio One
menu will appear. If you are a new Studio
One user, you will need to create a user
account. Follow the Create Account link if
your computer is connected to the
Internet. Once you have created your
account, continue to Activating Studio One Artist Online.
If your computer is not connected to the Internet, visit the
Studio One product page at www.presonus.com on an Internet
connected computer to create your account. After you have
created your account, skip to Activating Studio One Artist
Offline.
Activating Studio One Artist Online
Now that you have created a user account,
you can activate your copy of Studio One
Artist. Launch Studio One Artist, and the
Activate Studio One menu will appear.
Click on the Activate Online link and enter
your previously created account Username,
Password, and the Product Key you received with the Studio
One Artist installation disc. Click on the Activate button to
finish the activation process.

IN ST A L L A T I O N &
AU T H O R I Z A T I O N
7|
PreSonus 2009
Activating Studio One Artist Offline
Once you have created a user account,
launch Studio One Artist. From the
Activate Studio One Menu, click on the
Activate Offline link. Follow the
instructions to log in to your previously
created user account, register the
product, and obtain a license file.
Next, copy the license file to the computer on which Studio One
has been installed, and locate the license file as instructed in
the Activate Studio One menu. The activation process is now
complete.
Installing Bundled Content for Studio One Artist
Studio One Artist comes bundled with
an array of demo and tutorial
material, sampled instruments, loops,
samples, and unique thirdparty
content. The Studio One Artist bundle
includes all that you need to begin
producing music.
Upon completing the Studio One Artist installation and
activation process, the Studio One Content Installer will
appear. If it does not appear, navigate to Help/Studio One
Installation.
At the top of the installation menu, select the source from
which the content will be installed, as well as the location

IN ST A L L A T I O N &
AU T H O R I Z A T I O N
8|
PreSonus 2009
where you wish to install the content. The source of the content
will be the same DVD from which you installed Studio One
Artist. By default, Studio One Artist will point to your DVD
drive as the content source. Listed in the installation menu are
separate entries for each available item. Click in the checkbox
next to each item you wish to install, then click on the Install
Packets button at the bottom left of the menu to install the
selected content.
When finished installing content, click on the Done button to
exit the menu.
Studio One Artist content can be installed at any time by
accessing the Help/Studio One Installation menu. If you choose
not to install any portion of the content, you can install it at a
later time.

E N A B L I N G Y O U R A U D I O
DRIVER
9|
PreSonus 2009
Studio One and Studio One Artist were designed with PreSonus
interfaces in mind. Your PreSonus interface is already
integrated into Studio One Artist, so setup is quick and easy.
When Studio One Artist is launched, by default you will be
taken to the Start page. On this page, you will find document
management and deviceconfiguration controls, as well as a
customizable artist profile, a news feed, and links to demos and
tutorials from PreSonus. If you have an Internet connection on
your computer, these links will be updated as new tutorials
become available on the PreSonus Web site.
Complete information on all aspects of Studio One Artist is
available in the
Reference Manual PDF located on the Studio
One Artist Installation disc. The information in this manual
covers only the most basic aspects of Studio One Artist and is
intended to get you set up and recording as quickly as possible.
•Start Page:
Setup Area
Shows Active Audio Driver and
Sample Rate and Provides Quick
Links to Configure Audio and MIDI
In the middle of the Start page, you
will see the Setup area. Studio One
Artist automatically scans your
system for all available drivers and
selects a driver. By default, it will
choose a PreSonus driver if one is
available.

E N A B L I N G Y O U R A U D I O
DRIVER
10 |
PreSonus 2009
Selecting a Different Audio Driver
From the Start Page
If you do not see you PreSonus
interface’s audio driver on the Start
page when you launch Studio One,
click on the Configure Audio Devices
link in the Setup area to open the
Audio Setup Options window.
In the Audio Device menu, select the
driver for your PreSonus interface.
Click the Apply button and then OK.
After you have verified that the PreSonus driver has been
detected, please continue to the next Section to set up your
external MIDI devices. If you do not have any MIDI devices to
connect at this time, please skip Configuring Audio I/O.

C O N F I G U R I N G Y O U R M I D I
DEVICES
11 |
PreSonus 2009
From the External Devices window in Studio One Artist, you
can configure your MIDI keyboard controller, sound modules,
and control surfaces. This section will take you through setting
up your MIDI keyboard controller and sound module with your
PreSonus interface. Please consult the Reference Manual
located on your Studio One Artist installation DVD for
complete setup instructions for other MIDI devices.
Setting up an external MIDI keyboard controller from the
Start page.
A MIDI keyboard controller is a hardware device that is
generally used for playing and controlling other MIDI devices,
virtual instruments, and software parameters. In Studio One
Artist, these devices are referred to as Keyboards, and they
must be configured before they are available for use. In some
cases, your MIDI keyboard controller is also used as a tone
generator. Studio One Artist views the two functions of these
types of hardware as two different devices: a MIDI keyboard
controller and a sound module. The MIDI controls (keyboard,
knobs, faders, etc.) will be set up as a Keyboard. The sound
module will be set up as an Instrument.
STEP 1
From the Setup area in the
Start page, you can also set
up your external MIDI
devices. Before we set up a
new Song for recording, let’s take a moment to configure
external devices. Connect the MIDI Out of your external MIDI
controller to the MIDI In of your PreSonus interface

C O N F I G U R I N G Y O U R M I D I
DEVICES
12 |
PreSonus 2009
STEP 2
Click on the Configure External
Devices link in the Setup area on the
Start page to launch the External
Devices window.
Click the Add button.
STEP 3
When the Add Device window launches,
select “New Keyboard” from the menu
on the left. At this point, you can
customize the name of your keyboard by
entering the manufacturer and device
names.
Specify which MIDI channels will be used to communicate with
this keyboard. For most purposes, you should select all MIDI
channels. If you are unsure of which MIDI channels to select,
we suggest you select all 16.
STEP 4
In the Receive From dropdown
menu, select the MIDI interface
input from which Studio One Artist will receive MIDI data.
In the Send To dropdown menu, select the MIDI interface
output from which Studio One Artist will send MIDI data to
your keyboard. If your keyboard controller does not need to
receive MIDI data from Studio One (say, for moving motorized
faders and the like), you can leave this unselected. If your

C O N F I G U R I N G Y O U R M I D I
DEVICES
13 |
PreSonus 2009
keyboard does need to receive MIDI date, you must connect a
MIDI cable from the MIDI output of the MIDI breakout cable
to the MIDI input of the keyboard.
STEP 5
If this is the only keyboard that you
will use to control the virtual
instruments and your external synthesizers in Studio One Artist,
you should check the box next to Default Instrument Input.
This will automatically assign your keyboard to control all
MIDI devices in Studio One Artist. When you are finished, click
OK.
If you have a sound module you’d like to connect, leave the
External Devices window open and proceed to the next part of
this section. If not, you can close this window and skip to
Configuring Your Audio I/O.
Setting up an external MIDI sound module from the Start
page:
MIDI instrument controllers (keyboards, MIDI guitars, etc.)
send musical information in the form of MIDI data to tone
modules, which respond by generating sound, as instructed.
Tone modules can be standalone sound devices or can be
integrated into a controller, as with a keyboard synthesizer.
Studio One Artist refers to all tone generators as Instruments.
Once you have set up your MIDI keyboard controller, take a
moment to configure your sound module.

C O N F I G U R I N G Y O U R M I D I
DEVICES
14 |
PreSonus 2009
STEP 1
Connect the MIDI In of your
external sound module to the MIDI
Out of your PreSonus interface.
STEP 2
In the External Devices window,
click the Add button.
STEP 3
The Add Device window will launch.
From the menu on the left, select
“New Instrument.” At this point
you can customize the name of your
sound module by entering the
manufacturer and device names.
Specify which MIDI channels will be used to
communicate with this keyboard. For most purposes,
you should select all MIDI channels. If you are unsure of
which MIDI channels to select, we suggest you select all
16.

C O N F I G U R I N G Y O U R M I D I
DEVICES
15 |
PreSonus 2009
In the Send To dropdown menu,
select the MIDIinterface output from which Studio One Artist
will send MIDI data to your sound module.
In the Receive From dropdown menu, select the MIDI
interface output from which Studio One Artist will receive
MIDI data from your sound module. In most cases, your sound
module will not need to send information to Studio One, so you
can leave this unspecified.
Click OK and close the External Devices window. You are now
ready to start recording in Studio One Artist. The remainder of
this guide will go over how to set up a Song and will discuss
some general workflow tips for navigating through the Studio
One Artist enviroment.

CONFIGURING YOUR
AUDIO I/O
16 |
PreSonus 2009
Now that you’ve configured your MIDI devices, let’s create a
new Song and set up your default Audio I/O.
STEP 1
From the Start page, select “Create a new
Song.”
STEP 2
To begin a new Song, select “Empty
Song” from the Templates list. At this
point, you should give your Song a name
and select your preferred sample rate and
bit depth. You can also determine the length of your Song and
the type of time format you would like to use (Notation Bars,
Seconds, Samples, or Frames). Click the OK button when you
are finished.
If you plan on importing loops into your Song, you may want to
select “Stretch Audio Loops to Song Tempo” so that any loop
of a known BPM (like those in the included content library)
will import at the correct tempo.
STEP 3
When the Song window launches, launch
the Audio Setup window by going to File |
Options… (PC) or Studio One | Preferences
(Mac), and click on the Audio Setup button.

CONFIGURING YOUR
AUDIO I/O
17 |
PreSonus 2009
STEP 4
Click on the Song Setup button to open
the Song Setup window, then click on the
on the Audio I/O Setup icon.
STEP 5
Click on the Inputs tab in the Audio I/O
Setup window, and you will see all of the
available inputs on your PreSonus
interface. At this time, you can add the
number and type of inputs you plan to use.
We recommend that you create a mono
input for each of the inputs on your PreSonus interface. If you
plan on recording in stereo, you should also create a stereo bus
and assign it to the appropriate set of inputs. You can remove
any bus by simply selecting it and clicking the remove button.
To customize the name of your buses, doubleclick on the
default name to open a text box. When you have finished
typing, hit Enter. If you would like the same inputs to be
available every time you launch Studio One Artist, click the
“Make Default” button.
STEP 6
Click on the Outputs tab, and you will see
all of the available outputs on your
PreSonus interface. At this time, you can
add the number of output buses to which
you would like to have access and can give
them custom names.

CONFIGURING YOUR
AUDIO I/O
18 |
PreSonus 2009
In the lower right corner, you will see the Audition select menu.
This allows you to choose the ouput from which you will
audition audio files prior to importing them into Studio One
Artist. In general, you will want this to be the Main Out bus.
If you would like this output configuration available every time
you launch Studio One Artist, click the Make Default button.

C R E A T I N G A N E W S O N G
19 |
PreSonus 2009
Now that you’ve configured your MIDI and Audio I/O and
created a new Song, let’s go through some of the basics of
Studio One Artist so you can start recording!
Creating Audio Tracks
In the upper left corner of the Arrange
window, you will notice several
buttons. The middle button is the Add
Tracks button. Click this button to
bring up the Add Tracks window.
In the Add Tracks window, you can
select the number and type of Tracks
you’d like to create (Mono Audio,
Stereo Audio, Instrument, or
Automation) and can customize the
name and the color.
Once you have added your Tracks, you
can assign the input by simply clicking
on the input to which a Track is
currently assigned. This will bring up
your inputs list. You can also access
the Audio I/O Setup from here.
If you would like to add a Track for
each of the available inputs and have
the routing automatically assigned,
simply go to Track | Add Tracks for
All Inputs.