Prestigio PIS2 User manual

EN
EN - 1
Package Contents
1 Prestigio iPodTM Speaker 2 Remote Control
3
Power Adapter
4
AUX Cable
5 Quick Guide 6 Warranty Card
Device Overview
Remote Control
1. Power Button
2. Mode Button
3. Menu Button
4. Enter Button
5. Scroll Up
6. Next Track/Fast Forward
7. Play/Pause
8. Previous Track/Rewind
9. Scroll Down
10 Tune Down Volume
11 Tune Up Volume
12 Alarm Set
13 Alarm On/Off
14 Alarm Mode
15 Snooze/Nap/Sleep
Front View Rear View
Clock Display
Tuning /select
↑
&
↓
iPodTM Dock
Power Touch Pad
M – Mode Touch Pad
Auxiliary Input
E – Clock Touch Pad
DC Power Jack
Volume +/- Touch Pad
FM Antenna Socket
Getting Started
1. Pull off the tab at the end of remote control to enable the unit.
2. Insert appropriate plug of DC Power Adapter into the wall electrical
outlet.
3. Insert power connector of DC Power Adapter into the device.
4. Press and hold button to turn on the device/enter stand-by mode.
Music Function
Music Playback Modes
Press mode button to cycle through AUX, iPodTM, FM and AM modes:
iPodTM: Insert iPodTM
AUX: Connect external audio device with AUX cable provided. Turn on
external audio device to start playback.
into designated port on top. Press

|| button to
start playing, menu button to return to previous page, and

/

to
select items.
Radio: Press

/

to search for FM stations manually. Press and hold

/

for 2 seconds to search for FM stations automatically.
Playback Pause
Press

|| button to pause playback. Press the button again to resume.
Selecting Track
Press |

/

| button to return/skip to previous/next track.
Adjusting Volume
Press vol-/vol+ button to turn down/up volume.
7
8
9
10
5
4
3
2
1 6

EN
EN – 2
Extra Functions
Adjusting Clock Time
Simultaneously press and hold Mbutton and Ebutton to start adjusting
clock time. Press ↑/↓button on the device to adjust hour/minute digits
and press Ebutton to confirm.
Enabling/Disabling Alarm Clock
1. Press alarm button to cycle through Alame1, Alarm2, and Alarm off
modes.
2. When alarm 1/2 is activated, press alarm mode button to cycle
through alarm signal format including iPod, FM, AM, and BEEP sound.
Adjusting Alarm Clock Time
1. Press and hold alarm set button to start adjusting alarm clock time 1.
Press

/

button to adjust hour/minute digits and press alarm set
button to confirm.
2. Press

/

button to adjust alarm volume and press alarm set button
to confirm and continue to start adjusting alarm clock time 2.
3. Repeat above steps to complete alarm clock time settings.
Snooze Function
Press button to extend the alarm for 9 minutes when alarm sounds.
Sleep Timer Function
When the device is ON, press snooze/nap/sleep button cycle through
elapsed time before the device powers down automatically.
Nap Function
When the device is OFF, press snooze/nap/sleep button cycle through
elapsed time before the automatically powers on.
Dimmer Function
During standby mode, press button to cycle through 3 levels of LED
brightness.
iPodTM Charging/Docking
Simply connect iPodTM to appropriate port on top of device to charge
iPodTM.
Backup Batteires
2 X AA batteries can be stored at the button of device to ensure proper
functioning of device clock only.