Prince Castle Comfortline 442 User manual

OPERATING
INSTRUCTIONS
Push-Up & Wide Stance
High Chairs
Model No. 442 & 447
355 East Kehoe Blvd. lCarol Stream, IL 60188
Tel: [phone] lFax: [phone]
Toll Free: 1-800-PCASTLE
Printed in July 1998
Prince Castle Inc. 447-501
SPECIFICATIONS
Dimensions:
Overall Height: 34-1/8 (86.68 cm)
Table Clearance: 27-7/8 (70.80 cm)
Width w/tray: 23-3/4 (60.33 cm)
Depth at Base: 24-3/4 (62.87 cm)
Shipping Weight: 17 lbs (7.71 kg)
Prince Castle's high chairs are constructed of high-impact
resistant molded plastic that can withstand the tough treat-
mentkidsareknowntogive. ThePush-upandWideStance
High Chairs feature web safety straps with positive lock
buckles, triple chrome-plated finish on heavy-duty tubular
steel legs. Model 447 features a three-position adjustable
tray which is virtually unbreakable.
This product is warranted to be free from defects
in material and/or workmanship for a period of (1)
year from date of original purchase not to exceed
18 months from date of shipment from our factory.
Any component which proves faulty in material
and/or workmanship within the warranty period
will be replaced or repaired (at the option of Prince
Castle, Inc,) without cost to the customer for
parts or labor.
This warranty is subject to the following
exception/conditions:
lDamage caused by carelessness, neglect,
and/or abuse and misuse (e.g., dropping, tam-
pering with or improper maintenance) is not
covered.
lEquipment damaged in shipment, by fire, flood
or an act of God is not covered.
lAny use of non-genuine Prince Castle replace-
ment spare parts voids this warranty. All genu-
ine Prince Castle replacement spare parts are
warranted for ninety (90) days from date of
purchase.
WARRANTY

PARTS
1. Always refer to the Parts List in this manual. Part
numbers are needed for reference when ordering.
2. All replacement parts should be purchased from
your local Prince Castle Service Agency or your
local Prince Castle Distributor.
3. RETURNS: All inoperable warranty parts must be
returned to the Service Center.
INSTALLATION
1. After you have removed the unit from the carton,
inspect the unit for signs of damage. If there is
damage to the unit:
lNotify carrier within 24 hours after delivery.
lSave carton and packing materials for inspection
purposes.
lContact the Prince Castle Customer Sales
Department at 1-800-722-7853 or your local
Prince Castle distributer to arrange for
a replacement to be sent.
2. Verify that all parts have been received.
3. Open carton and remove seat, legs, tray, and
accessory carton (4 casters, 4 screws).
4. Assemble casters to legs.
5. Turn seat upside down.
6. Place legs mounting plate on the bottom of the
chair making sure the part marked FRONT on the
mounting plate faces the front of the plastic seat.
7. Attach seat to mounting plate with (4) screws
provided. Start all (4) screws before tightening.
8. Turn chair upright and attach tray to chair arms.
The chair is now ready for use.
OPERATION
CAUTION: When a child is in the chair
always fasten his/her seat-belt. Never leave
a child unattended. Any child using the high
chair should be secured by the restraining
strap and crotch strap at all times.
To use the seat belt simply push the clasp into the
buckle. To release squeeze the top and bottom edge
of the buckle and pull apart. See figure 2.
CLEANING
Wipe the entire chair with a clean cloth soaked in a
mild soap solution. Afterwards, wipe the chair down
with a dry, clean cloth.
figure 2
3
PARTS LIST
Item Part No. Description
1 447-43S Seat (White & White)
CL462S Seat (White & Saddle)
CL456S Seat (Brown & Saddle)
CL054S Seat (Gold & Brown)
2 446-5S Back Pad (Walnut)
2447-4S Back Pad (Gray)
447-41S Back Pad (White)
3 460-13 Safety Strap
2447-3S Restraing Strap (Black)
4 CL2033 Crotch Strap
2447-2S Crotch Strap (Black)
5 446-13 Tray (White)
6 447-26S Leg Assembly
7 447-8 Caster Insert
8 447-7 Caster
 442-7 Belly Bar Kit
 445-23 Tray Slides (Pack of 2)
 Not Shown
1
2
4
5
6
7
8