PROCET PT-PTC-A-BT User manual
PT-PTC-A-BT Ethernet Adaptor
WWW.PROCETPOE.COM
Fast Installation Manual
Data Code:PTD2206002
—1—
Copyright ©2022 Creative Lianjie Network Technology Co., Ltd.
Copy right, all rights reserved.
e contents of this manual cannot be copied, plagiarised, or translated by any company
or individual without the express written permission of Creative Lianjie Network Technology
Co., Ltd. Meanwhile it can not be spread for prot in any way. (Electronic, Photocopying,
Recording, etc.)
is product complies with the design requirements for environmental protection,
please do not dispose of this product as general garbage! Users should dispose of it
separately from household waste when throwing i t away. Sorting is helpful to save
natural resources and reduce environmental pollution.
Please dispose of in accordance with the disposal method of waste electronic products
in your area.
e product specications and technical contents of this manual are for reference only
and are subject to update without notice. It is only used as a guide,unless there is a special
agreement, and none of the statements made constitute a warranty of any kind.
It is a registered trademark of Creative Lianjie Network Technology Co., Ltd.
Protected bylaw, infringement must be investigated.
Statement
—2—
Product Prole
PT-PTC-A-BT is a network power adapter
designed based on the IEEE802 .3at standard.
e output is a standard Type-C in terface,
which can provide
5V/3A 9V/3A 12V/3A
15V/3A 20V/3A
power
supply.
PT-PTC-A-BT is designed with a small
volume of a white plastic case, which is
convenient since it can becarried around
on the desktop or can be xed and opened
for use. e input and output of the device
do no t exceed thesafe voltage of 57V, and
there is no need for electric shock protection.
e product has passed the EU CE certiction.
e device needs to be used in a wired network
environment that supports IEEE802.3bt, plug and play without conguration,and the output
supports PD3.0 fast charging protocol, which can provide continuous power supply and stable
network connection to low-power mobile devices such as mobile phones, gameconsoles,and
tablet computers.
1-1. Product Display
—3—
2-1 Product Working Diagram
Product Working Diagram
PoE IN
Power
Link/Act
USB Type-c Data And Power
1.RJ45 Port Input Power Supply LED Indicator (Yellow)
Light On:Normal power supply
Light O:Abnormal power supply
2.
Type-C Port Output
Power Supply
LED Indicator (Green)
Light On:Normal connection
Light O:Abnormal connection
3.RJ45 Port
4.Type-C Port
—4—
Product Working Diagram
Input
Wor k
Environment
Internet Protocol None
None
Output
Input
PoE Compliance
Pin Assignment
Output
Data Speed
Operating Temperature
Operating Humidity
Operating Altitude
Storage Temperature
44-57V DC
IEEE802.3 bt
4/5(+),7/8(-) Or3/6(+),1/2(-) Or 3/6(-),1/2(+)
None
-20To 40
20%-80%No Condensation
Below2000m
-20-70
Storage Humidity 10%-90%No Condensation
Network Transmission
IP Class
CE
100mm×60mm×22mm
IP40
Certicate
Dimensions
5V 3A 9V 3A 12V 3A 15V 3A 20V 3A
Product Working Diagram
—5—
Light On: Normal connection
Light O: Not connected or failed to connect
Blinking: Data transfer
Light On: Normal power supply
Light O: Abnormal power supply
FCC CFR47 Part 15
EN 55032-2015
EN 55035-2017
EMC
LED
Ye l l o w
Green
FCC
CE
—6—
Product Dimensions
Pic3-1 Product Dimensions
100MM
60MM 22MM
—7—
Product Use
Notice:
1.Connect the PoE network cable to the RJ45 port of this Power Adaptor, use a CAT5
or above network cable, and the length should be less than 100m .
2.Connect one end of the Type-C cable to the output port of this product, and the other
end to the powered device (Such as a mobile phone, tablet computer,etc.)
3.If you need to replace the Type-C cable, please purchase a genuine cable that supports
100Mbps data transmission.
Pic5-1 Product Connection Diagram
—8—
Pb
Item
Metal Parts ×
×
×
×
Plastic Parts ○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
PCB
Element Parts
Paper Accessories
is form is prepared in accordance with the provisions of SJ/T 11364 -2014.
Indicates that the content of this hazardous substance in all homogeneous materials of this part
is with in the limit requirements specied in GB/T26572 -2011 .
I t means that the content of the hazardous substance in at least one homogeneous material of the
part exceeds the limit requirement specied in GB/T26572 - 2011 . ere is currently no mature
alternative in the industry, which meets theenvironmental protection requirements of the EU RoHS
directive .
Hg Cd Cr VI PBB PBDE
Declaration of Toxic and Hazardous Substances
1.Before using the device, please be sure to read the manual carefully and perform
standardized operations .
2.is device is only used indoors, please place it in a ventilated and dry place.
Measures for the Administration of the Restricted Use of the Hazardous Substances
Contained inElectrical and Electronic Products Restricted Substances or Elements
!
is product should not be discarded is product should not be discarded randomly aer
it has expired or is unworked in maintenance. Please hand it over to a company qualied for
the disposal of waste electronic products. Please refer to the national or local regulations on
the disposal of WEEE for the correct method.
Product Quality Certicate
Qualification Card
PASS
Creative Lianjie Network Technolgy Co.Ltd
www.procetpoe.com
Table of contents
Other PROCET Receiver manuals
