Project Nursery Starlight Room Projector User manual

D
C
5
V
What’s in the box?
(1) Starlight Room Projector
(1) USB Power Cable
Power the Starlight Room Projector
The Starlight Room Projector offers 2 options for power:
• USB power cable
• 3 AA batteries (not included)
Starlight Room
Projector, back
To use the USB power cable:
Plug the USB power cable into
the POWER 5V jack on the back
of the Starlight Room Projector.
Plug the other end of the USB
power cable into a USB power
source, like a computer or
charging adapter.
To use batteries: Use a Philips-head
screwdriver (not included) to unlatch
the battery door on the bottom of
the Starlight Room Projector.
Remove the battery door and insert
3 AA batteries (not included) into
the battery compartment. (Match
the polarity signs on the inside of the
compartment!)
Place the battery door back on
the bottom of the Starlight Room
Projector. Screw the battery door latch back into place to
lock the door.
IMPORTANT: NEVER place the Starlight Room Projector or
cords of any kind inside the crib. NEVER place the Starlight
Room Projector or cords within reach of children. THIS IS
NOT A TOY.
Everyday use
PLAYING SOUNDS
The Starlight Room Projector offers a variety of soothing
lullabies and nature sounds, as well as white noise.
To turn the Starlight Room
Projector on: Press the
icon on the top of the
Starlight Room Projector.
To play the lullabies: With the Starlight Room Projector
turned on, press to turn on the built-in lullabies. Each press
selects a different lullaby.
To play the nature sounds: With the Starlight Room
Projector turned on, press to turn on the built-in nature
sounds. Each press selects a different nature sound.
To adjust the volume: Press and hold the icon. The
volume will eventually go to its lowest level. Stop pressing,
then press and hold again to increase the volume.
To turn lullabies or nature sounds off: Press and hold the
(for lullabies) or (for nature sounds) icon.
D
C
5
V
Battery door
Door latch screw
Starlight Room
Projector, bottom
Starlight Room Projector, top

Questions?
Just call 1-844-393-7338 or visit ProjectNursery.com
Quick Start Guide
©2022 Voxx Accessories Corp. PND10 QSG 00
Starlight Room Projector
USING THE PROJECTOR LIGHT
To turn the projector light on: Make sure the Starlight Room
Projector is on (press the icon if it isn’t). Press the icon
to turn on the projector light.
To adjust the light of the projector: Press the icon
repeatedly to cycle through the different projector light
options.
To turn the projector light off: Press and hold the icon.
USING THE TIMER
The timer switch on the side of the Starlight
Room Projector shuts the lights, sound,
and projector off automatically after a set
amount of time.
To set the timer: Make sure the Starlight Room Projector is
on (press the icon if it isn’t). Then set the projector light
and lullabies or nature sounds up the way you want them.
Set the timer switch on the side of the Starlight Room
Projector to the desired setting: (timer off), 15, 30, or
60 minutes.
Note: For best results, use the timer if you’re leaving the
Starlight Room Projector on for a long time (like all night).
15 30 60min
Starlight Room
Projector, side