Optoma ZK507 User manual

User manual
DLP®Projector

English
2
TABLE OF CONTENTS
SAFETY............................................................................................... 4
Important Safety Instruction....................................................................................................... 4
Laser Radiation Safety Information ........................................................................................... 5
3D Safety Information................................................................................................................ 6
Copyright ................................................................................................................................... 6
Disclaimer.................................................................................................................................. 6
Trademark Recognition ............................................................................................................. 7
FCC ........................................................................................................................................... 7
Declaration of Conformity for EU countries ............................................................................... 8
WEEE........................................................................................................................................ 8
INTRODUCTION ................................................................................ 9
Package Overview..................................................................................................................... 9
Standard accessories................................................................................................................ 9
Optional accessories ................................................................................................................. 9
Product Overview ..................................................................................................................... 10
Connections.............................................................................................................................. 11
Keypad ..................................................................................................................................... 12
Remote control ......................................................................................................................... 13
SETUP AND INSTALLATION........................................................... 15
Installing the projector .............................................................................................................. 15
Connecting sources to the projector......................................................................................... 17
Adjusting the projector image................................................................................................... 18
Remote setup ........................................................................................................................... 20
USING THE PROJECTOR ............................................................... 22
Powering on / o the projector.................................................................................................. 22
Selecting an input source ......................................................................................................... 23
Menu navigation and features .................................................................................................. 24
OSD Menu tree......................................................................................................................... 25
Display image settings menu.................................................................................................... 33
Display 3D menu ...................................................................................................................... 37
Display aspect ratio menu ........................................................................................................ 37
Display edge mask menu ......................................................................................................... 39
Display digital zoom menu........................................................................................................ 39
Display image shift menu ......................................................................................................... 39
Audio internal speaker menu.................................................................................................... 40
Audio mute menu ..................................................................................................................... 40
Audio volume menu.................................................................................................................. 40
Audio audio input menu............................................................................................................ 40
Audio audio out menu............................................................................................................... 40
Setup projection menu.............................................................................................................. 41

English 3
Setup lter settings menu......................................................................................................... 41
Setup power settings menu...................................................................................................... 41
Setup security menu................................................................................................................. 42
Setup test pattern menu ........................................................................................................... 42
Setup remote settings menu..................................................................................................... 42
Setup projector ID menu........................................................................................................... 42
Setup 12V trigger menu............................................................................................................ 43
Setup options menu.................................................................................................................. 43
Setup reset OSD menu ............................................................................................................ 44
Network LAN menu .................................................................................................................. 44
Network control menu............................................................................................................... 45
Setup network control settings menu ....................................................................................... 46
Info menu.................................................................................................................................. 51
MAINTENANCE................................................................................. 52
Installing and cleaning the dust lter ........................................................................................ 52
ADDITIONAL INFORMATION.......................................................... 53
Compatible resolutions............................................................................................................. 53
Image size and projection distance .......................................................................................... 56
Projector dimensions and ceiling mount installation................................................................. 57
IR remote codes ....................................................................................................................... 58
Troubleshooting ........................................................................................................................ 62
Warning indicators.................................................................................................................... 64
Specications ........................................................................................................................... 66
Optoma global oces............................................................................................................... 67

English
4
SAFETY
The lightning ash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of su󰀩cient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
Please follow all warnings, precautions and maintenance as recommended in this user’s guide.
Important Safety Instruction
 Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from
over heating, it is recommended to install the projector in a location that does not block ventilation.
As an example, do not place the projector on a crowded co󰀨ee table, sofa, bed, etc. Do not put the
projector in an enclosure such as a book case or a cabinet that restricts air ow.
 To reduce the risk of re and/or electric shock, do not expose the projector to rain or moisture. Do not
install near heat sources such as radiators, heaters, stoves or any other apparatus such as ampliers
that emits heat.
 Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short
out parts that could result in re or electric shock.
 Do not use under the following conditions:
± In extremely hot, cold or humid environments.
(i) Ensure that the ambient room temperature is within 5°C ~ 40°C
(ii) Relative humidity is 10% ~ 85%
± In areas susceptible to excessive dust and dirt.
± Near any appliance generating a strong magnetic eld.
± In direct sunlight.
 Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be
(but not limited to):
± Unit has been dropped.
± Power supply cord or plug has been damaged.
± Liquid has been spilled on to the projector.
± Projector has been exposed to rain or moisture.
± Something has fallen in the projector or something is loose inside.
 Do not place the projector on an unstable surface. The projector may fall over resulting in injury or the
projector may become damaged.
 Do not block the light coming out of the projector lens when in operation. The light will heat the object
and may melt, cause burns or start a re.
 Please do not open or disassemble the projector as this may cause electric shock.
 Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous
voltages or other hazards. Please call Optoma before you send the unit for repair.
 See projector enclosure for safety related markings.
 The unit should only be repaired by authorized service personnel.
 Only use attachments/accessories specied by the manufacturer.
 Do not look into straight into the projector lens during operation. The bright light may harm your eyes.
 This projector will detect the life of the light source itself.

English 5
 When switching the projector o󰀨, please ensure the cooling cycle has been completed before
disconnecting power. Allow 90 seconds for the projector to cool down.
 Turn o󰀨 and unplug the power plug from the AC outlet before cleaning the product.
 Use a soft dry cloth with mild detergent to clean the display housing. Do not use abrasive cleaners,
waxes or solvents to clean the unit.
 Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
 Do not setup the projector in places where it might be subjected to vibration or shock.
 Do not touch the lens with bare hands.
 Remove battery/batteries from remote control before storage. If the battery/batteries are left in the
remote for long periods, they may leak.
 Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it
can adversely a󰀨ect the quality of the projector performance.
 Please follow the correct projector orientation installation as non standard installation may a󰀨ect the
projector performance.
 Use a power strip and or surge protector. As power outages and brown-outs can KILL devices.
Laser Radiation Safety Information
 Complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as dened
in IEC 62471-5:Ed. 1.0. For more information see Laser Notice No. 57, dated May 8, 2019
IEC 60825-1:2014 CLASS 1 LASER PRODUCT RISK GROUP 2
Complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2
LIP as defined in IEC 62471-5:Ed. 1.0. For more information see Laser Notice No. 57,
dated May 8, 2019.
IEC 60825-1:2014 PRODUIT LASER DE CLASSE 1 GROUPE DE RISQUE 2
Conforme aux normes 21 CFR 1040.10 et 1040.11, à l'exception de la conformité en
tant que PIL du groupe de risque 2 définie dans la CEI 62471-5: Ed. 1,0. Pour plus
d'informations, voir l'avis au laser n ° 57 du 8 mai 2019.
IEC 60825-1:2014 1㊱◶ݿӝ૷RG2ধ䲟ㅿ㓝
䲚ҼIEC 62471-5:Ed.1.0ѣᇐѿⲺRG2 LIP ধ䲟ㅿ㓝ԛཌ, 㾷ㅜ21 CFR 1040.10ૂ
1040.11θᴪཐ⴮ީؗᚥθ䈭৸䰻2019ᒪ5ᴾ8ᰛⲺㅢ57◶ݿޢ઀.
IEC 60825-1:2014 1五◶ݿ⭘૷RG2ধ䳠ㅿ㍐
䲚ҼIEC 62471-5:Ed.1.0ѣᇐ㗟ⲺRG2 LIP ধ䳠ㅿ㍐ԛཌ, 㾷ㅜ21 CFR 1040.10ૂ
1040.11θᴪཐ⴮䰒䋽䁀θ䄁৹䯧2019ᒪ5ᴾ8ᰛⲺㅢ57㲕◶ݿޢ઀.
Failure to comply with the following could result in death or serious injury.
 This projector has built-in Class 4 laser module. Disassembly or modication is very dangerous and
should never be attempted.
 Any operation or adjustment not specically instructed by the user’s guide creates the risk of
hazardous laser radiation exposure.
 Do not open or disassemble the projector as htis may cause damage by the exposure of laser
radiation.
 Do not stare into beam when the projector is on. The bright light may result in permanent eye damage.
 When turning on the projector, make sure no one within projection range is looking at the lens.
 Without following the control, adjustment or operation procedure may cause damage by the exposure
of laser radiation.
 Adequate instructions for assembly, operation, and maintenance, including clear warnings concerning
precautions to avoid possible exposure to laser.

English
6

IEC 60825-1: 2014 Class 1 RG2
IEC 62471-5:2015 RG2
 Additional instructions to supervise children, no staring, and not use optical aids.
 Additional instructions to install above the reach of children.
 Notice is given to supervise children and to never allow them to stare into the projector beam at any
distance from the projector.
 Notice is given to use caution when using the remote control for starting the projector while in front of
the projection lens.
 Notice is given to the user to avoid the use of optical aids such as binoculars or telescopes inside the
beam.
 As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015.
 WARNING: MOUNT ABOVE THE HEADS OF CHILDREN. The use of a ceiling mount is
recommended with this product to place it above the eyes of children.
3D Safety Information
Please follow all warnings and precautions as recommended before you or your child use the 3D function.
Warning
Children and teenagers may be more susceptible to health issues associated with viewing in 3D and should be
closely supervised when viewing these images.
Photosensitive Seizure Warning and Other Health Risks
 Some viewers may experience an epileptic seizure or stroke when exposed to certain ashing images
or lights contained in certain Projector pictures or video games. If you su󰀨er from, or have a family
history of epilepsy or strokes, please consult with a medical specialist before using the 3D function.
 Even those without a personal or family history of epilepsy or stroke may have an undiagnosed
condition that can cause photosensitive epileptic seizures.
 Pregnant women, the elderly, su󰀨erers of serious medical conditions, those who are sleep deprived or
under the inuence of alcohol should avoid utilizing the unit’s 3D functionality.
 If you experience any of the following symptoms, stop viewing 3D pictures immediately and consult a
medical specialist: (1) altered vision; (2) light-headedness; (3) dizziness; (4) involuntary movements
such as eye or muscle twitching; (5) confusion; (6) nausea; (7) loss of awareness; (8) convulsions;
(9) cramps; and/ or (10) disorientation. Children and teenagers may be more likely than adults
to experience these symptoms. Parents should monitor their children and ask whether they are
experiencing these symptoms.
 Watching 3D projection may also cause motion sickness, perceptual after e󰀨ects, disorientation, eye
strain and decreased postural stability. It is recommended that users take frequent breaks to lessen
the potential of these e󰀨ects. If your eyes show signs of fatigue or dryness or if you have any of the
above symptoms, immediately discontinue use of this device and do not resume using it for at least
thirty minutes after the symptoms have subsided.
 Watching 3D projection while sitting too close to the screen for an extended period of time may
damage your eyesight. The ideal viewing distance should be at least three times the screen height. It
is recommended that the viewer’s eyes are level with the screen.
 Watching 3D projection while wearing 3D glasses for an extended period of time may cause a
headache or fatigue. If you experience a headache, fatigue or dizziness, stop viewing the 3D

English 7
projection and rest.
 Do not use the 3D glasses for any other purpose than for watching 3D projection.
 Wearing the 3D glasses for any other purpose (as general spectacles, sunglasses, protective goggles,
etc.) may be physically harmful to you and may weaken your eyesight.
 Viewing in 3D projection may cause disorientation for some viewers. Accordingly, DO NOT place your
3D PROJECTOR near open stairwells, cables, balconies, or other objects that can be tripped over, run
into, knocked down, broken or fallen over.
Copyright
This publication, including all photographs, illustrations and software, is protected under international copyright
laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced
without written consent of the author.
© Copyright 2019
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no representations
or warranties with respect to the contents hereof and specically disclaims any implied warranties of
merchantability or tness for any particular purpose. The manufacturer reserves the right to revise this publication
and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any
person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations and pending
applications in other countries throughout the world.
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
DLP®, DLP Link and the DLP logo are registered trademarks of Texas Instruments and BrilliantColorTM is a
trademark of Texas Instruments.
MHL, Mobile High-Denition Link and the MHL Logo are trademarks or registered trademarks of MHL Licensing,
LLC.
All other product names used in this manual are the properties of their respective owners and are Acknowledged.
FCC
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause
harmful interference to radio or television reception, which can be determined by turning the device o󰀨 and on is
encouraged to try to correct the interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the device and receiver.
 Connect the device into an outlet on a circuit di󰀨erent from that to which the receiver is connected.
 Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC
regulations.

English
8
Caution
Changes or modications not expressly approved by the manufacturer could void the user's authority, which is
granted by the Federal Communications Commission, to operate this projector.
Operation Conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Remarque à l'intention des utilisateurs canadiens
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Declaration of Conformity for EU countries
 EMC Directive 2014/30/EU (including amendments)
 Low Voltage Directive 2014/35/EU
 RED 2014/53/EU (if product has RF function)
WEEE
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure
utmost protection of the global environment, please recycle it.

English 9
INTRODUCTION
Package Overview
Carefully unpack and verify that you have the items listed below under standard accessories. Some of the items
under optional accessories may not be available depending on the model, specication and your region of
purchase. Please check with your place of purchase. Some accessories may vary from region to region.
The warranty card is only supplied in some specic regions. Please consult your dealer for detailed information.
Standard accessories
Optional accessories
Note:
Optional accessories vary depending on model, specication and region.
Projector Remote control Power lead Documentation

Warranty Card*

Basic User Manual

Paper UM
F3
On
Geometric
Mode
Correction PIP/PBP
Off
F1 F2
AV Mute
ENTER
Source
Volume D Zoom
Info.
VGA
1
S-Video
2
HDMI1
3
HDMI2
HDMI3
Format Freeze Remote
ID All
HDBaseT
4
Video
5
DVI
6
BNC
7
YPbPr
8
DisplayPort
9
3D
0
Re-Sync
Menu
F3
Note:
The remote control is shipped with the battery.
*For European warranty Information, please visit www.optoma.com.
Lens cap CD user manual Carry bag VGA cable

English
10
INTRODUCTION
Product Overview
11
721 53 4
8 9 5
10
4
11
6
Note:
Do not block projector intake and exhaust vents.
When operating the projector in an enclosed space, allow at least 30 cm clearance around the intake
and exhaust vents.
No Item No Item
1. Top Cover 7. Ventilation (inlet)
2. Focus Ring 8. Zoom Lever
3. Lens 9. Lens Shift Dial
4. IR Receiver 10. Ventilation (outlet)
5. Keypad 11. Tilt-Adjustment Foot
6. Input / Output

English 11
INTRODUCTION
Connections
(5V 1.5A)
AC-IN RJ-45 RS232 VGA
SERVICE
S / PDIF
AUDIO
IN 12V
OUT
AUDIO
OUT
USB
POWER OUT
HDMI 1
HDMI v1.4
HDMI 2
HDMI v2.0 4K/MHL
2
13
1 6 743 5 9 10 118
12
No Item No Item
1. KensingtonTM Lock Port 8. AUDIO IN Connector
2. Power Socket 9. 12V OUT Connector
3. RJ-45 Connector 10. Service Connector (*2)
4. RS232 Connector 11. S/PDIF Connector
5. HDMI 1 (v1.4) Connector 12. USB Power Out (5V 1.5A) (*3)
6. HDMI 2 (v2.0) 4K / MHL Connector
(*1;*3)13. AUDIO OUT Connector
7. VGA Connector
Note:
(*1)HDMI 2 connector supports HDCP2.2 and MHL V2.2.
(*2)For rmware upgrade.
(*3)MHL and USB DC5V are alternately powered on. For example, USB DC 5V is o when MHL is on
or DC 5V is on when MHL is o.

English
12
INTRODUCTION
Keypad
7
8
1 2 43
56
No Item No Item
1. Power and On/Standby LED 5. Re-Sync
2. Source 6. Four Directional Select Keys
3. Menu 7. Laser LED
4. Enter 8. Temp LED

English 13
INTRODUCTION
Remote control
For Data Model
F3
On
Geometric
Mode
Correction PIP/PBP
Off
F1 F2
AV Mute
ENTER
Source
Volume D Zoom
Info.
VGA
1
S-Video
2
HDMI1
3
HDMI2
HDMI3
Format Freeze Remote
ID All
HDBaseT
4
Video
5
DVI
6
BNC
7
YPbPr
8
DisplayPort
9
3D
0
Re-Sync
Menu
F3
10
1
2
3
4
5
6
8
7
9
11
34
33
32
31
12
13
15
14
16
19
2017 2118
27
26
29
30
28
25
24
23
22
No Item No Item
1. Power on 18. YPbPr (not supported)
2. Geometric Correction 19. Numeric keypad (0-9)
3. Function button (F1) (Assignable) 20. Display port (not supported)
4. Mode 21. 3D
5. Four directional select keys 22. DVI (not supported)
6. Information 23. HDMI3 (not supported)
7. Function button (F3) (Assignable) 24. HDMI1
8. Source 25. HDMI2
9. Menu 26. Remote ID / Remote all
10. Volume - / + 27. Digital Zoom - / +
11. Freeze 28. Re-sync
12. Format (Aspect Ratio) 29. Laser (not supported)
13. VGA 30. Enter
14. S-Video 31. AV Mute
15. HDBase-T 32. Function button (F2) (Assignable)
16. Video 33. PIP/PBP (not supported)
17. BNC (not supported) 34. Power o󰀨

English
14
INTRODUCTION
Note: Some keys may have no function for models that do not support these features.
For Home Model
ON OFF
Menu
VGA1
HDMI1
User2
Contrast
Aspect ratio
DB
Volume
Source Re-sync
User1
Brightness
Keystone
Mute
User3
Mode
3D
Sleep Timer
Volume
HDMI2
VGA2 Video YPbPr
1
3
2
4
5
6
7
8
11
12
13
14
15
16
17
18
19
20
21
23
22
24
25
27
26
9
10
No Item No Item
1. Power On 15. User 3
2. User 2 16. Contrast
3. User 1 17. Display Mode
4. Brightness 18. Aspect Ratio
5. Keystone (not supported) 19. 3D Menu On / O󰀨
6. Mute 20. Sleep Timer
7. DB (Dynamic Black) 21. Volume +
8. Source 22. Re-Sync
9. Enter 23. Four Directional Select Keys
10. Menu 24. Volume -
11. HDMI1 25. HDMI2
12. VGA1 26. YPbPr (not supported)
13. VGA2 (not supported) 27. Video (not supported)
14. Power O󰀨
Note: Some keys may have no function for models that do not support these features.

English 15
SETUP AND INSTALLATION
Installing the projector
Your projector is designed to be installed in one of four possible positions.
Your room layout or personal preference will dictate which installation location you select. Take into consideration
the size and position of your screen, the location of a suitable power outlet, as well as the location and distance
between the projector and the rest of your equipment.
Table mount front Ceiling mount front
Table mount rear Ceiling mount rear
Projector should be placed at on a surface and 90 degrees / perpendicular to the screen.
 How to determine projector location for a given screen size, please refer to distance table on page
56.
 How to determine screen size for a given distance, please refer to distance table on page 56.
Note: The further away the projector is placed from the screen the projected image size increases and vertical
oset also increases proportionally.
IMPORTANT!
Do not operate the projector in any orientation other than table top or ceiling mount. The projector should
be horizontal and not tilted either forwards/backwards or left/right. Any other orientation will invalidate the
warranty and may shorten the lifetime of the projector light source or the projector itself. For none standard
installation advise please contact Optoma.

English
16
SETUP AND INSTALLATION
Projector installation notice
 Allow at least 30 cm clearance around the exhaust vent.
Minimum
100mm
(3.94 inches)
Minimum
300mm
(11.81 inches)
Minimum
300mm
(11.81 inches)
Minimum
100mm
(3.94 inches)
Minimum
100mm
(3.94 inches)
Minimum
100mm
(3.94 inches)
 Ensure that the intake vents do not recycle hot air from the exhaust vent.
 When operating the projector in an enclosed space, ensure that the surrounding air temperature within
the enclosure does not exceed operation temperature while the projector is running, and the air intake
and exhaust vents are unobstructed.
 All enclosures should pass a certied thermal evaluation to ensure that the projector does not recycle
exhaust air, as this may cause the device to shutdown even if the enclosure temperature is with the
acceptable operation temperature range.

English 17
SETUP AND INSTALLATION
Connecting sources to the projector
(5V 1.5A)
AC-IN RJ-45 RS232 VGA
SERVICE
S / PDIF
AUDIO
IN 12V
OUT
AUDIO
OUT
USB
POWER OUT
HDMI 1
HDMI v1.4
HDMI 2
HDMI v2.0 4K/MHL
MOLEX
MOLEX
1
10
2
3
4
5
6
7
8
9
11
12
13
14
No Item No Item
1. HDMI Cable 8. S/PDIF Out Cable
2. HDMI / MHL Cable 9. USB Power Cable
3. RCA Component Cable 10. Audio Out Cable
4. VGA In Cable 11. HDMI Dongle
5. Audio In Cable 12. RS232 Cable
6. 12V DC Jack 13. RJ-45 Cable
7. USB Cable 14. Power Cord

English
18
SETUP AND INSTALLATION
Adjusting the projector image
Image height
The projector is equipped with elevator feet for adjusting the image height.
1. Locate the adjustable foot you wish to adjust on the underside of the projector.
2. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector.
Tilt-Adjustment Feet
Tilt-Adjustment Ring
Zoom, lens shift, and focus
 To adjust the image size and position, do the following:
a. Push down rmly on the middle of the top cover to unlock the latch. Then open the top cover.
Zoom Lever
Lens Shift
b. To adjust the image size, turn the zoom lever clockwise or counterclockwise to increase or decrease
the projected image size.
c. To adjust the image position, turn the lens shift dial clockwise or counterclockwise to adjust the
position of the projected image vertically.

English 19
SETUP AND INSTALLATION
 To adjust the focus, turn the focus ring clockwise or counterclockwise until the image is sharp and
legible.
Focus Ring
Focus adjustment
Note: The projector will focus at a distance of 1.3m to 9.3m.

English
20
SETUP AND INSTALLATION
Remote setup
Installing / replacing the batteries
Two AAA size batteries are supplied for the remote control.
1. Remove the battery cover on the back of the remote control.
2. Insert AAA batteries in the battery compartment as illustrated.
3. Replace back cover on remote control.
Note: Replace only with the same or equivalent type batteries.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
 Do not mix batteries of di󰀨erent types. Di󰀨erent types of batteries have di󰀨erent characteristics.
 Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or
cause chemical leakage in old batteries.
 Remove batteries as soon as the are depleted. Chemicals that leak from batteries that come in contact
with skin can cause a rash. If you nd any chemical leakage, wipe thoroughly with a cloth.
 The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
 If you will not be using the remote control for an extended period of time, remove the batteries.
 When you dispose of the batteries, you must obey the law in the relative area or country.
E󰀨ective range
Infra-Red (IR) remote control sensor is located on the front side and rear side of the projector. Ensure to hold the
remote control at an angle within 30 degrees perpendicular to the projector’s IR remote control sensor to function
correctly. The distance between the remote control and the sensor should not be longer than 7 meters (~ 23 feet).
 Make sure that there are no obstacles between the remote control and the IR sensor on the projector
that might obstruct the infra-red beam.
 Make sure the IR transmitter of the remote control is not being shined by sunlight or uorescent lamps
directly.
 Please keep the remote controller away from uorescent lamps for over 2 m or the remote controller
might become malfunction.
 If the remote control is close to Inverter-Type uorescent lamps, it might become ine󰀨ective from time
to time.
 If the remote control and the projector are within a very short distance, the remote control might
become ine󰀨ective.
 When you aim at the screen, the e󰀨ective distance is less than 5 m from the remote control to the
screen and reecting the IR beams back to the projector. However, the e󰀨ective range might change
according to screens.