ESI EVOLVE Series User manual

E VO LVE
MONITOR ARM SERIES
UNIVERSAL ASSEMBLY GUIDE
PHONE: [phone]
EMAIL: [e-mail]
WEB: esiergo.com

TABLE OF CONTENTS
COMPONENTS
POLE MOUNT...................................... 4
MOTION ARM..................................... 4
VESA MOUNT....................................... 4
SLIDER MOUNT..................................... 4
ARM STEM........................................... 5
FIXED ARM.......................................... 5
BUSHINGS............................................ 5
POLE MOUNT CONFIGURATIONS
DESK CLAMP....................................... 14
GROMMET MOUNT............................ 16
ADJUST TENSION
MOTION ARM.................................... 26
VESA MOUNT..................................... 27
SLIDER MOUNT................................... 27
OTHER
ATTACHING THE DISPLAY / QUICK RELEASE........... 24
CABLE MANAGEMENT............................................. 31
ALLEN KEY STORAGE................................................ 32
LOCKING
180ºLOCK-OUT................................. 28
LOCK SLIDER PLATE............................29
PREVENT QUICK RELEASE..................30
THE BASICS
ARM STEM CONFIGURATIONS
SINGLE................................................ 18
DUAL................................................... 19
TRIPLE.................................................. 19
ATTACH ARMS
MOTION ARMS................................. 20
FIXED ARMS...................................... 20
VESA MOUNTS.................................. 22
SLIDER MOUNTS................................ 22
2

TABLE OF CONTENTS
SINGLE DISPLAY
E VO LV E1- F ....................6
E VO LV E1- F S ..................7
E VO LV E1- M ..................8
E VO LV E1- M S ................9
E VO LV E1- F F .................10
E VO LV E1- F M ...............11
E VO LV E1- F F S ...............12
E VO LV E1- F M S..............13
DUAL DISPLAY
EVOLVE2-F ...................6
E VO LV E1- F S ..................7
EVOLVE2-M..................8
EVOLVE2-MS ................9
EVOLVE2-FF.................10
EVOLVE2-FM ...............11
EVOLVE2-FFS...............12
EVOLVE2-FMS .............13
TRIPLE DISPLAY
E VO LV E3 - F F.................10
E VO LV E3 - F M ...............11
E VO LV E3 - F F S ...............12
E VO LV E3 - F MS .............13
QUAD DISPLAY
E VO LV E4 - M ..................8
E VO LV E4 - M S ................9
E VO LV E4 - F F.................10
E VO LV E4 - FM ...............11
E VO LV E4 - F FS ...............12
E VO LV E4 - FM S .............13
SIX DISPLAY
E VO LV E6 - F F.................10
E VO LV E6 - FM ...............11
E VO LV E6 - F FS ...............12
E VO LV E6 - FM S .............13
STANDARD CONFIGURATIONS
(28"POLE)
For Quad and Six Display configurations, a 28" pole is required.
Quad Displays: Repeat the Dual assembly on the 28" pole.
Six Displays: Repeat the Triple assembly on the 28" pole.
STANDARD CONFIGURATIONS
(16"POLE)
3

MOTION ARM
POLE MOUNT
(DESK CLAMP OR GROMMET MOUNT)
SLIDER MOUNT
DISPLAY MOUNT
VESA MOUNT
DISPLAY MOUNT
DESK CLAMP GROMMET MOUNT
STANDARD BUSHING
PREINSTALLED ON ARM STEM
AND FIXED ARM
4

ARM STEM
FIXED ARM
REDUCER BUSHINGSTANDARD BUSHING
PREINSTALLED ON ARM STEM
AND FIXED ARM
SMALL BUSHING
5

ARM STEM
Slide ARM STEM
over pole and
secure in place
with the 5mm
Allen Wrench.
(pg. 18)
FIXED LIMB
Insert FIXED ARM
to ARM STEM.
(pg. 20)
POLE MOUNT
Secure POLE
MOUNT to work
surface.
(pg. 14)
VESA
Attach Reducer
Bushing to VESA
and insert VESA
to FIXED ARM.
(pg. 23)
DUAL
For dual display
congurations,
reverse the ARM
STEM on the pole.
(pg. 19)
VESA PLATE
Attach VESA
plate to back of
monitor.
(pg. 24)
QUICK RELEASE
Attach displays
using the Quick
Release Feature.
(pg. 24)
VESA FIXED ARM STEM
STEM
FIXED ARM
VESA
TENSION
Adjust tension on
VESA.
(pg. 27)
EVOLVE1-F • EVOLVE2-F
BUILD FIRST
COMPLETES EVOLVE1-F ASSEMBLY
BUILD SECOND
COMPLETES EVOLVE2-F ASSEMBLY
REDUCER
BUSHING
REDUCER
BUSHING
6

ARM STEM
Slide ARM STEM
over pole and
secure in place
with the 5mm
Allen Wrench.
(pg. 18)
FIXED LIMB
Insert FIXED ARM
to ARM STEM.
(pg. 20)
POLE MOUNT
Secure POLE
MOUNT to work
surface.
(pg. 14)
SLIDER
Attach Reducer
Bushing to SLIDER
and insert SLIDER
to FIXED ARM.
(pg. 23)
DUAL
For dual display
congurations,
reverse the ARM
STEM on the pole.
(pg. 19)
SLIDER FIXED ARM STEM
STEM
FIXED ARM
SLIDER
VESA PLATE
Attach VESA
plate to back of
monitor.
(pg. 24)
QUICK RELEASE
Attach displays
using the Quick
Release Feature.
(pg. 24)
TENSION
Adjust tension on
SLIDER.
(pg. 27)
EVOLVE1-FS • EVOLVE2-FS
BUILD FIRST
COMPLETES EVOLVE1-FS ASSEMBLY
BUILD SECOND
COMPLETES EVOLVE2-FS ASSEMBLY
REDUCER
BUSHING
REDUCER
BUSHING
7

ARM STEM
Slide ARM STEM
over pole and
secure in place
with the 5mm
Allen Wrench.
(pg. 18)
MOTION ARM
Insert MOTION
ARM to ARM
STEM.
(pg. 20)
POLE MOUNT
Secure POLE
MOUNT to work
surface.
(pg. 14)
VESA
Attach Small
Bushing to VESA
and insert VESA
to MOTION ARM.
(pg. 23)
DUAL
For dual display
congurations,
reverse the ARM
STEM on the pole.
(pg. 19)
VESA MOTION ARM STEM
STEM
MOTION ARM
VESA
VESA PLATE
Attach VESA
plate to back of
monitor.
(pg. 24)
QUICK RELEASE
Attach displays
using the Quick
Release Feature.
(pg. 24)
TENSION
Adjust tension on
VESA.
(pg. 27)
EVOLVE1-M • EVOLVE2-M
BUILD FIRST
COMPLETES EVOLVE1-M ASSEMBLY
BUILD SECOND
COMPLETES EVOLVE2-M ASSEMBLY
SMALL
BUSHING
SMALL
BUSHING
8

ARM STEM
Slide ARM STEM
over pole and
secure in place
with the 5mm
Allen Wrench.
(pg. 18)
MOTION ARM
Insert MOTION
ARM to ARM
STEM.
(pg. 20)
POLE MOUNT
Secure POLE
MOUNT to work
surface.
(pg. 14)
SLIDER
Attach Small
Bushing to SLIDER
and insert SLIDER
to MOTION ARM.
(pg. 23)
DUAL
For dual display
congurations,
reverse the ARM
STEM on the pole.
(pg. 19)
SLIDER
MOTION ARM STEM
SLIDER
MOTION ARM
STEM
VESA PLATE
Attach VESA
plate to back of
monitor.
(pg. 24)
QUICK RELEASE
Attach displays
using the Quick
Release Feature.
(pg. 24)
TENSION
Adjust tension on
SLIDER.
(pg. 27)
EVOLVE1-MS • EVOLVE2-MS
BUILD FIRST
COMPLETES EVOLVE1-MS ASSEMBLY
BUILD SECOND
COMPLETES EVOLVE2-MS ASSEMBLY
SMALL
BUSHING
SMALL
BUSHING
9

ARM STEM
Slide ARM STEM
over pole and
secure in place
with the 5mm
Allen Wrench.
(pg. 18)
FIXED ARM
Insert FIXED ARM
to ARM STEM.
(pg. 20)
POLE MOUNT
Secure POLE
MOUNT to work
surface.
(pg. 14)
FIXED ARM
Insert FIXED ARM
to FIXED ARM.
(pg. 21)
DUAL
For dual display
congurations,
reverse the
second ARM STEM
on the pole.
(pg. 19)
Then, Repeat
conguration
on second ARM
STEM.
QUICK RELEASE
Attach displays
using the Quick
Release Feature.
(pg. 24)
TENSION
Adjust tension
on VESA and/or
SLIDER.
(pg. 27)
VESA
Attach Reducer
Bushing to VESA
and insert VESA
to FIXED ARM.
(pg. 23)
TRIPLE
For triple display
congurations,
reverse the 2nd
ARM STEM on the
pole, then add a
third ARM STEM.
(pg. 19)
Attach Reducer
Bushing to VESA
and insert VESA to
third ARM STEM.
(pg. 22)
VESA FIXED ARM FIXED ARM STEM
VESA
STEM
VESA
FIXED ARM
FIXED ARM
STEM
VESA PLATE
Attach VESA
plate to back of
monitor.
(pg. 24)
EVOLVE1-FF • EVOLVE2-FF • EVOLVE3-FF
BUILD FIRST
COMPLETES EVOLVE1-FF ASSEMBLY
BUILD SECOND
COMPLETES EVOLVE2-FF ASSEMBLY
BUILD THIRD
COMPLETES EVOLVE3-FF ASSEMBLY
REDUCER
BUSHING
REDUCER
BUSHING REDUCER
BUSHING
10

ARM STEM
Slide ARM STEM
over pole and
secure in place
with the 5mm
Allen wrench.
(pg. 18)
FIXED ARM
Insert FIXED ARM
to ARM STEM.
(pg. 20)
POLE MOUNT
Secure POLE
MOUNT to work
surface.
(pg. 14)
MOTION ARM
Insert MOTION
ARM to FIXED
ARM.
(pg. 21)
DUAL
For dual display
congurations,
reverse the
second ARM STEM
on the pole.
(pg. 19)
Then, Repeat
conguration
on second ARM
STEM.
TENSION
Adjust tension on
MOTION ARM.
(pg. 26)
Adjust tension
on VESA and/or
SLIDER.
(pg. 27)
VESA
Attach Small
Bushing to VESA
and insert VESA
to MOTION ARM.
(pg. 22)
TRIPLE
For triple display
congurations,
reverse the 2nd
ARM STEM on the
pole, then add a
third ARM STEM.
(pg. 19)
Attach Reducer
Bushing to VESA
and insert VESA to
third ARM STEM.
(pg. 22)
VESA MOTION ARM FIXED ARM STEM
VESA
MOTION ARM
FIXED ARM
STEM
QUICK RELEASE
Attach displays
using the Quick
Release Feature.
(pg. 24)
VESA PLATE
Attach VESA
plate to back of
monitor.
(pg. 24)
EVOLVE1-FM • EVOLVE2-FM • EVOLVE3-FM
BUILD FIRST
COMPLETES EVOLVE1-FM ASSEMBLY
BUILD SECOND
COMPLETES EVOLVE2-FM ASSEMBLY
VESA
BUILD THIRD
COMPLETES EVOLVE3-FM ASSEMBLY
REDUCER
BUSHING
SMALL
BUSHING
SMALL
BUSHING
11

ARM STEM
Slide ARM STEM
over pole and
secure in place
with the 5mm
Allen Wrench.
(pg. 18)
FIXED ARM
Insert FIXED ARM
to ARM STEM.
(pg. 20)
POLE MOUNT
Secure POLE
MOUNT to work
surface.
(pg. 14)
FIXED ARM
Insert FIXED ARM
to FIXED ARM.
(pg. 21)
DUAL
For dual display
congurations,
reverse the
second ARM STEM
on the pole.
(pg. 19)
Then, Repeat
conguration
on second ARM
STEM.
TENSION
Adjust tension
on VESA and/or
SLIDER.
(pg. 27)
SLIDER
Attach Reducer
Bushing to SLIDER
and insert SLIDER
to FIXED ARM.
(pg. 23)
TRIPLE
For triple display
congurations,
reverse the 2nd
ARM STEM on the
pole, then add a
third ARM STEM.
(pg. 19)
Attach Reducer
Bushing to VESA
and insert VESA to
third ARM STEM.
(pg. 22)
SLIDER
FIXED ARM
FIXED ARM STEM
SLIDER
FIXED ARM
FIXED ARM
STEM
QUICK RELEASE
Attach displays
using the Quick
Release Feature.
(pg. 24)
VESA PLATE
Attach VESA
plate to back of
monitor.
(pg. 24)
EVOLVE1-FFS • EVOLVE2-FFS • EVOLVE3-FFS
BUILD FIRST
COMPLETES EVOLVE1-FFS ASSEMBLY
BUILD SECOND
COMPLETES EVOLVE2-FFS ASSEMBLY
VESA
STEM
BUILD THIRD
COMPLETES EVOLVE3-FFS ASSEMBLY
REDUCER
BUSHING
REDUCER
BUSHING
REDUCER
BUSHING
12

ARM STEM
Slide ARM STEM
over pole and
secure in place
with the 5mm
Allen Wrench.
(pg. 18)
FIXED ARM
Insert FIXED ARM
to ARM STEM.
(pg. 20)
POLE MOUNT
Secure POLE
MOUNT to work
surface.
(pg. 14)
MOTION ARM
Insert MOTION
ARM to FIXED
ARM.
(pg. 21)
DUAL
For dual display
congurations,
reverse the
second ARM STEM
on the pole.
(pg. 19)
Then, Repeat
conguration
on second ARM
STEM.
SLIDER
Attach Small
Bushing to SLIDER
and insert SLIDER
to MOTION ARM.
(pg. 23)
TRIPLE
For triple display
congurations,
reverse the 2nd
ARM STEM on the
pole, then add a
third ARM STEM.
(pg. 19)
Attach Reducer
Bushing to VESA
and insert VESA to
third ARM STEM.
(pg. 22)
SLIDER MOTION ARM FIXED ARM STEM
SLIDER
MOTION ARM
FIXED ARM
STEM
TENSION
Adjust tension on
MOTION ARM.
(pg. 26)
Adjust tension
on VESA and/or
SLIDER.
(pg. 27)
QUICK RELEASE
Attach displays
using the Quick
Release Feature.
(pg. 24)
VESA PLATE
Attach VESA
plate to back of
monitor.
(pg. 24)
EVOLVE1-FMS • EVOLVE2-FMS • EVOLVE3-FMS
BUILD FIRST
COMPLETES EVOLVE1-FMS ASSEMBLY
BUILD SECOND
COMPLETES EVOLVE2-FMS ASSEMBLY
VESA
STEM
BUILD THIRD
COMPLETES EVOLVE3-FMS ASSEMBLY
REDUCER
BUSHING
SMALL
BUSHING
SMALL
BUSHING
13

STEP1
POLE MOUNT
DESK CLAMP ASSEMBLY
OPTION 2
Extend Desk Clamp to
Support thicker
work surfaces.
For work surfaces between
1.38" - 2.99" thick.
See page 15
OPTION 3
Convert the Desk Clamp
Mount to a Grommet
Mount (see pg. 16)
For work surfaces up to
1.4" thick.
See page 16
OPTION 1
Secure Pre-assembled
Desk Clamp to
work surface.
For work surfaces between
.6" - 2.2" thick.
See page 15
14

STEP 2
Replace the clamping
component in the lower
position and secure with
the 4mm Allen Key.
STEP 3
Adhere the adhesive pad
underneath the base to
protect the work surface.
STEP 1
Remove the clamping
component from the
upper position with the
4mm Allen Key.
DESK CLAMP ASSEMBLY
OPTION 2
DESK CLAMP ASSEMBLY
OPTION 1
STEP 1
Twist to tighten the desk
clamp on the work
surface.
15

5"
2.25"
4"
1.875"
GROMMET MOUNT ASSEMBLY
OPTION 3
16

STEP 2
Insert the large screw to
the grommet plate and
reattach the 3 screws with
the 4 mm Allen Key.
STEP 3
Adhere the adhesive pad
underneath the base to
protect the work surface.
STEP 1
Remove the 3 screws with
the 4mm Allen Key.
STEP 4
Complete the grommet
assembly with the
remaining components.
(Bolt should be visible
under work surface)
GROMMET MOUNT ASSEMBLY
OPTION 3
14 MM NUT
14 MM NUT
WASHER
GROMMET PLATE
14 MM WRENCH
(INCLUDED)
BOLT
17

ARM STEM MUST BE SECURED
TO POLE BEFORE ATTACHING
ADDITIONAL COMPONENTS
STEP2
ARM STEM
DUAL DISPLAY
Slide ARM STEMs over pole
and secure with the 5mm
Allen key. See right.
TRIPLE DISPLAY
Slide ARM STEMs over pole
and secure with the 5mm
Allen key. See right.
SINGLE DISPLAY
Slide ARM STEM over pole
and secure with the 5mm
Allen key.
18

ARM STEM IS REVERSED
FOR EVEN ALIGNMENT
ARM STEM IS REVERSED
FOR EVEN ALIGNMENT
ARM STEM IS STACKED
ON TOP TO HOLD CENTER
MONITOR
ARM STEM
POSITIONING FOR TRIPLE CONFIGURATIONS
ARM STEM
POSITIONING FOR DUAL CONFIGURATIONS
19

STEP3
ATTACH ARMS
SECURE
Secure the screw using the
2mm Allen Key.
INSERT
Insert MOTION ARM or
FIXED ARM to ARM STEM.
INSERT A MOTION ARM OR A FIXED ARM TO AN ARM STEM
20