Promeba PA-11 User manual

PA-11 Head immobilizer
PA-11
Instructions manual

1
I. Applicable Scope
This product can be used with spine board together; it is mainly used for fixed
the head and neck.
II. Product Features
1、It is made of high-density plastic material, large ear holes for monitoring
the patient’s ear canal;
2、The product can be used with scoop stretcher and spine board together.
3、Minimal interference with X-ray, MRI, or CT scanning procedure;
4、Waterproof plastic coating makes it easy to clean and prevents bacterial
growth on it.
5、This product is used for adult.
III. Technical Features
Model
PA-11
Unfolded Size(L×W×H)
40×26×16cm
IV. Using Method
①Put the head immobilize lay on the stretcher head section, assembling the
safety belts at the bottom of stretcher and fixed by the bristle together.
②The top of head immobilize fixed on the stretcher. The belt through the
hole of stretcher and then fixed by the bristle together.
③Fixed the two cushions on the head immobilize by
the bristle. Make sure put the patient’s head at the center of
two cushions and adjust the size for comfortable.

2
④Fixed belt like following。
⑤Assembling finished as picture.
V. Maintenance
Keep clean as routine (incl. disinfect)
VI. Storage
1、Store this stretcher in the place of damp proof and non-corrosion environment.
2、Storage, transportation, as shown by the box stacking.
VII. Transport
1、Be transferred by common transporting tools：plane、ship or road.
2、Stretcher can be manually handling.
VIII. Packaging and accessories
1、Nylon bag plus a whole carton packaging