PRONAR KPR500 TORNADO User manual

PRONAR Sp. z o.o.
17-210 NAREW, UL. MICKIEWICZA 101A, PODLASKIE PROVINCE, POLAND
PHONE: [phone] [phone]
[phone] [phone]
FAX: [phone] [phone]
www.pronar.pl
EDITION: 1A.10.2019
PUBLICATION NO.: 586.00.UM
OPERATOR’S MANUAL
MULCHING MOWER
KPR500 TORNADO
TRANSLATION OF THE ORIGINAL COPY OF THE MANUAL
KEEP FOR FUTURE REFERENCE
EN

INTRODUCTION

Introduction
2PRONAR KPR 500
INTRODUCTION
Information contained herein is current
at date of publication. As a result of im-
provements, some numerical values and
illustrations contained in this publication
may not correspond to the actual spec-
ication of the machine supplied to the
user. The manufacturer reserves the right
to introduce design changes in machines
produced that facilitate and improve the
quality of machine operation, without
making minor amendments to this Opera-
tor's Manual.
This Operator's Manual is an integral part
of the machine documentation. Before
using the machine, the user must carefully
read this Operator's Manual and observe
all recommendations. This guarantees
safe operation and ensures failure-free
work of the machine. The machine is de-
signed to meet obligatory standards, doc-
uments and legal regulations currently in
force.
If the information contained in the Oper-
ator's Manual needs clarication then the
user should refer for assistance to the sale
point where the machine was purchased
or to the Manufacturer.
It is recommended that the serial numbers
of the machine and major subassemblies
are inscribed in the spaces below after
purchase of the machine.
U.01.1.EN
Machine serial number

3
PRONAR KPR 500
Introduction
SYMBOLS APPEARING IN THIS OPERATOR'S MANUAL
DANGER
Information, descriptions of danger and
precautions as well as recommendations
and prohibitions associated with the safety
of use are marked in the text with the sign
DANGER. Failure to observe the instructions
may endanger the machine operator's or
other person's health or life.
IMPORTANT
Vital information and instructions that must
be observed are highlighted by a border
and accompanied by the text: IMPORTANT
Failure to observe the instructions may
lead to damage to the machine as a result
of improper operation, adjustment or use.
TIP
Additional tips included in the Operator's
Manual describe useful advice for the ma-
chine operation and are marked with the
sign TIP.
In order to focus the user's attention on
the need to perform maintenance, the rel-
evant section of the Operator's Manual is
marked with the clock pictogram.
U.02.1.EN
DANGER
IMPORTANT
TIP

Introduction
4PRONAR KPR 500
DIRECTIONS USED IN THIS OPERATOR'S MANUAL
Left side – side to the left hand of the op-
erator facing in the direction of machine's
forward travel.
Right side – side to the right hand of the
operator facing in the direction of ma-
chine's forward travel.
Rotation to the right – clockwise rotation
of a mechanism (the operator is facing the
mechanism).
Rotation to the left – counterclockwise
rotation of a mechanism (the operator is
facing the mechanism).
U.03.1.EN
586-B.01.1
B
A
C D
Figure 1.1 Directions used with reference to the machine
(A) front , (B ) rear, (C) left side, (D) right side

PRONAR KPR 500
CONTENTS
INTRODUCTION
Introduction 2
Symbols appearing in this Operator's Manual 3
Directions used in this Operator's Manual 4
BASIC INFORMATION
1.1 Identication 1.2
1.2 Intended use 1.3
1.3 Equipment 1.5
1.4 Terms & Conditions of Warranty 1.6
1.5 Shipping 1.7
1.6 Envoronmental risk 1.9
1.7 Withdrawal from use 1.10
SAFETY ADVICE
2.1 Safe use 2.2
2.2 Safety when hitching the machine 2.3
2.3 Safety rules when maintaining hydraulic system 2.4
2.4 Safety during transport travel 2.5
2.5 Maintenance and Cleaning 2.6
2.6 Safety during machine operation 2.9
2.7 Safe operation of the PTO shaft 2.10
2.8 Residual risk 2.11
2.9 Information and warning decals 2.12
DESIGN AND OPERATION
3.1 Technical specication 3.2
3.2 Design and operation 3.4
3.3 Linkage 3.6
3.4 Hydraulic system 3.7
3.5 Electrical system 3.8
3.6 Drive transmission. 3.9
3.7 Additional and optional equipment 3.10

CORRECT USE
4.1 Get ready for operation 4.2
4.2 Technical inspection 4.4
4.3 Hitch the mower to implement carrier (tractor). 4.6
4.4 Operate the mower 4.9
4.5 Driving on public roads 4.12
4.6 Unhitching the machine from the carrier vehicle 4.13
MAINTENANCE
5.1 Half axle maintenance 5.2
5.2 Wheel maintenance 5.5
5.3 Hydraulic system maintenance 5.7
5.4 Drive transmission system maintenance 5.9
5.5 Cutting unit maintenance 5.12
5.6 Electrical system maintenance 5.14
5.7 Lubrication 5.15
5.8 Tighten bolt connections 5.20
5.9 Storage 5.21
5.10 Troubleshooting 5.22