ProScan EP5585 User manual

55
EP5585

TV Base Stand assemble
17
17
17
18
19
18
30
31
32
3.2. Audio/Video Source Selection
3.1. Initial Installation
3.3. DTV Mode Operations
SETTINGS
PC Mode
Initial Setup
4.1.Customizing the PICTUERE Settings
4.2.Customizing the Audio Settings
4.3.Customizing theTIME Settings
4.4.Customizing the SETUP Settings
4.5.Customizing the Patental Settings
4.6.Customizing the TV Settings
20
21
24
27

TV Base Stand assemble
3.Mounting on the wall
This unit is VESA-complian,and is designed to be wall-mounted
with a VESA-compliant 15.75"x7.87"(400mmx200mm)mounting kit
designde for flat-panel TVs(not supplied).Mount this unit according
to the instructions included in the monting kit. Length of screw should
not exceed 12 mm
NOTE
Remove the base stand before mounting the unit on the wall.
6 Screws (23BMH)
R
Long
Short
Long
Short
Panel side
L
Four mounting holes
(size M6 screw)
400mm
200mm

AUDIO OUT: Output
Audio L / R (left / right)
1. USB (For Service)
CH+
VOL+
MENU
SOURCE
POWER

Universal Remote Code:08F7
(Universal Rmote Control is not included)
ASPECT:Selects the screen size
sound from speakers
24
5
7
11
12
14
16
18
20
23
25
26
29
31
34
3
6
8
9
10
13
15
17
19
21
22
24
27
28
30
32
33
2. TV: Press to switch to TV signal source directly.
3. AV: Press to switch to AV signal source directly.
4. HDMI: Press to switch to HDMI signal source
directly.
5. YPbPr: Press to switch to YPbPr signal source
directly.
6. PC: Press to switch to VGA signal source directly.
7. AUTO: Press to adjust the picture automatically
in PC mode.
8. CC: CC mode.
9. ASPECT: Selects the screen size.
10. FAV: Show the list of favourite channels.
11. MUTE: Mute or restore the sound.
12. ADD/ERASE: Add/erase the favorite channels.
13. FAV+: Next favourite channel.
14. FAV-: Previous favourite channel.
15. WARM: The cool color temperature adjustment
16. COOL: To warm color temperature adjustment
17. NORMAL: To the standard color temperature
adjustment
18. SOURCE: Press to change signal source.
19. MENU: Show Menu.
20. EXIT: Exit the Menu.
23. INFO: Show information about the current program.
24.P.MODE: Output image mode selection.
25.SLEEP: Auto Power Off Timer.
26.S.MODE: Setting audio options.
21. NAVIGATION KEYS (Up, Down, Left,
Right and OK): To move in the menus and
confirm settings.

adaptor
27.FREEZE: Freeze the image.
28. VOL: Increase and decrease volume.
30. MTS: In the TV condition, press this button to
select the stereo mode.
29. CH: Next and Previous channel.
32. NUMBER KEYS: Change the channel directly.
33.
31. CH.LIST: Show the list of channels.

Note:Coaxial output

1817
3.1. Initial Installation
The first time the unit is turned on or anytime the system is restored to
the defaulted settings, the Initial Installation wizard will be displayed on the
screen.
Conect the antenna cable to the RF connector at the connections panel
and follow the steps displayed on the screen to set up the system basic
settings (Language, Cable, etc.) and start an auto search of TV channels.
Turn on the TV by pressing the POWER button on TV
or on the remote control, press SOURCE and use the
direction buttons /to select the desired source
depending on the equipment you have connected (AV,
HDMI, VGA) or choose TV to enter these mode.
Use CH+ or CH- buttons to tune the desired channel, or enter the channel
number directly using the numeric keypad. Press OK to display on screen the
list of TV and radio channels (press the /buttons to sort by group and
show only the DTV, the analog TV channels, etc.).
Use MTS button to select the audio language broadcasting, CC button to
show or hide subtitles on screen and FAV button to see a list of your favorite
channels.
3.2. Audio/Video Source Selection
3.3. DTT Mode Operations
3. Initial Setup
4. SETTINGS
TV
AV
YPbPr
HDMI1
HDMI2
HDMI3
PC
Source Select