Prowill PTC-PRII User manual

1、Please use 1-to-1 Ethernet cable.
2、One end cable connects to printer ethernet port of
lower layer, and the other end connects to the hub.
Then the hub connects to display and keyboard.
PTC-PRII Connection installation
Ethernet
Ethernet
Ethernet

FEED
DISPLAY
POWER 1.After receiving the printer, please take the plastic slice.
2. Put paper and connect printer power. (Lack of paper or
cover not close properly, the printer will beep.)
3. Turn on the printer. The printer display, customer display,
and keyboard display work after two seconds.After all the
display shows 000, start to press feed to take tickets.
4. If you want to restart the machine, please turn it off and
wait for 10 seconds before turning it on.
PTC-PRII Installation

Set Up Down Enter
PTC-PRII Setting
Setting procedures
1
Press “set” button to enter setting mode.(The
printer display doesn’t work not.)
2
Press “set” button again, printer display
will
show “00”
3
Press
“set” button to choose “00” to
“09“ function.
4
Press “up” or “down” to set up the value.
5
Press “enter” to choose the
valus,
and display
shows
”__ ”.
The value has been kept in the memory.
6
Display turns back to original.
8 Functions
00
：Remain item
01
：Year 00～99
02
：Month 01～12
03
：Date 01～31
04
：Hour 00～23
05
：Minute 00～59
06
：Second 00～59
08
：Counter nubmer
09: Return to zero

PTC-OP2
CALL
Press CALL
to call the people who took
the ticket.
RECALL
Recall the same number.
Call
the
passed
number
Press number 001
-999 and press CALL
ON
OFF
Turn
on / off the power
SET
This button is for software edition.
Please do not press it, or the keyboard
will be restarted.
NUMBER
Numbers
000-999