Proxxon DB 250 User manual

1
2
3
4
5
0
DB 250
Manual

1
2
3
4
5
0
Fig.1
Fig. 2
Fig. 4
Fig. 3
1
2
3
4
5
0
19
1234
7
6
9
10
5
8
11
13
14
12
1
3
2
4
Fig. 5
- 3 -

- 7-
Translation of the
Original Operating Instructions
Micro wood tuning lathe, DB 250
Dear customer!
Using these instructions
• makes it easier to get familiar with the device
• prevents malfunctions caused by improper handling, and
• lengthens the service life of your device.
Please keep these instructions readily accessible at all times.
Use the device only when you have understood it exactly and
always adhere to the instructions.
PROXXON is not liable for the safe functioning of the device in
cases of:
• handling that does not conform to the usual usage,
• purposes of use not designated in the instructions,
• disregard of the safety instructions.
You are not entitled to guarantee claims in cases of:
• operator errors,
• inadequate maintenance.
WARNING!
Read all safety warnings and instructions. Failure to
follow all safety warnings and instructions listed below
may result in electric shock, fire and/or serious injury.
KEEP ALL SAFETY WARNINGS AND INSTRUCTIONS FOR
THE FUTURE !
For use in dry environments only
Protection class II device
Please do not dispose off the machine!
Risk of injury!
Never work without dust protection mask and
safety glasses. Some dusts have a hazardous
effect! Materials containing asbestos may not
be machined!
GB
Noise/vibration information
The information on vibration and noise emission has been de-
termined in compliance with the prescribed standardised and
normative measuring methods and can be used to compare
electrical devices and tools with each other.
These values also allow a preliminary evaluation of the loads
caused by vibration and noise emissions.
Warning!
Depending on the operating conditions while operating the de-
vice, the actually occurring emissions could differ from the val-
ues specified above!
Please bear in mind that the vibration and noise emission can
deviate from the values given in these instructions, depending
on the conditions of use of the tool. Poorly maintained tools, in-
appropriate working methods, different work pieces, too high a
feed or unsuitable work pieces or materials or unsuitable bits
and cutters (here: saw blade) can significantly increase the vi-
bration load and noise emission across the entire work period.
To more accurately estimate the actual vibration and noise load,
also take the times into consideration where the device is
switched off, or is running but is not actually in use. This can
clearly reduce the vibration and noise load across the entire
work period.
Warning:
• Ensure regular and proper maintenance of your tool
• Stop operation of the tool immediately if excessive vibration
occurs!
• Unsuitable bits and cutters can cause excessive vibration and
noises. Only use suitable bits and cutters!
• Take breaks if necessary when working with the device!

- 8-
Maintenan e, leaning and are
Attention:
Dis onne t the mains plug prior to every adjustment, main-
tenan e measure or repair!
Note:
Every device is dirtied by dust when working. Cleaning is there-
fore essential. To ensure a long service life, however, the ma-
chine should be cleaned with a soft cloth or brush after each
use.
Mild soap or other suitable cleaning agent may be used in this
context. Solvents or cleaning agents containing alcohol (e.g.

- 9-
EC De laration of Conformity
Name and address of the manufacturer:
PROXXON .A., 6-10, Härebierg, L-6868 Wecker
Produktbezeichnung: DB 250
Artikel Nr.: 27020
In sole responsibility, we declare that this product conforms to
the following directives and normative documents:
EU EMC Directive 2014/30/EC
Applied standards: DIN EN 55014-1 / 05.2012
DIN EN 55014-2 / 02.2016
DIN EN 61000-3-2 / 03.2015
DIN EN 61000-3-3 / 03.2014
EU Machinery Directive 2006/42/EC
Applied standards: DIN EN 62841-1 / 07.2016
Date: 22.03.2018
Dipl.-Ing. Jörg Wagner
PROXXON .A.
Machine afety Department
The CE document authorized agent is identical with the signatory.
petrol, cleaning alcohols, etc.) should be avoided, since these
can attack plastic casings.
The apertures required for cooling the motor must always be
kept free of dust and dirt.
A essories
For more detailed information on accessories, please request
our device catalogue from the address specified on the last
page in the warranty information.
Please note in general:
Proxxon bits and cutters have been designed to work with our
machines, which makes them optimal for their use.
We will not assume any liability whatsoever for the safe and
proper function of our devices when using third-party bits and
cutters!
Servi e note
Please note: The mains power input may only be replaced by
our Proxxon Service Department or a qualified specialist!

Spare Parts List
PROXXON DB 250
ET - Nr.: Description

- 41 -

- 42 -
Fig. 8 Fig. 9
Fig. 11
13
2
2
1
2 mm
1
2
1
2
1
2
Fig. 10
Fig. 6 Fig. 7

GB Service n te
All PROXXON products are thoroughly inspected a ter production. Should a de ect
occur nevertheless, please contact the dealer rom whom you purchased the
product. Only the dealer is responsible or handling all legal warranty claims
which re er exclusively to material and manu acturer error.
Improper use, such as capacity overload, damage due to outside in luences
and normal wear are excluded rom the warranty.
You will ind urther notes regarding "Service and Spare Parts Management" at
www.proxxon.com.
Art.-Nr. 27020-99 PR 703718703J