PSK E12A User manual

E12A
USER´S MANUAL
MANUAL DE USUARIO

Safety Precautions
Flying and installation of this speaker cabinet must be carried out by qualied personnel
following the approved safety standards.
Do not attempt to clean the plastic enclosure with solvents or petrochemical based cleaners.
Do not place objects which are sources of heat on the speaker cabinet such as lighting
equipment or smoke machines.
Do not expose the speaker cabinet to direct rain or stand in water. Liquid getting into the box
will risk a short circuit and will be hazardous.
Do not stack the speaker cabinet in a manner that could cause injury should a cabinet
become dislodge.
Additional precautions for Auto-amplified devices of the series.
Before installation, ensure that the voltage and frequency of power outlet match the power
requirements of the loudspeaker.
Disconnect from main power before to make connections in the loudspeaker.
Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the
power-cord come into contact with other cables. Only handle the power-cord by the plug.
In case to replace the fuse, it must be changed by identical rate and dimensions.
Attention
Before connecting or operating your new loudspeaker, please study the accompanying instruction
manual paying special attention to the operating precautions and wiring procedure.

Functions
1.- USB Player
MODE: USB/SD/FM/BT
Play/Pause
Repeat
Last
Next
Bluetooth
2.- Volume 1: Volume of Microphone input
3.- Volume 2: Volume of line in
4.- MP3 Volume
5.- Master Volume
6.- Clip LED
7.- 1/4 Jack for Mic input
8.- RCA
9.- Equalizer: Level of high frequency
10.- Equalizer: Level of low frequency
11.- XLR Connector for Mic Input
12.- Line Input
13.- Mix Out to another active speaker
14.- Power Switch
15.- Main supply
16.- Aux