PSSO CSA User manual

© Copyright Reproduction prohibited!
INSTALLATION GUIDE
FLYING BRACKET
HEXAGONAL CSA/CSK

IMPORTANT PRECAUTIONS
Never attempt to install the system with damaged or
defective hardware.
Any situation reducing the safety status must be
corrected immediately.
Refer to qualified personnel if you need information
on the installation.

Install the hanging hardware on each speaker.
1
Install the hexagonal frame.
2

Attach the speakers to the hexagonal frame.
3
Illustration of the finished installation.
4
Rotate the
basket screw
and adjust the
speaker to
the slope
angle.
Item number: .................................11040955
Max. load WLL (4-fold):..................400 kg
Max. load BGV C1 (8-fold):...........200 kg
Max. load BGV C1 (10-fold):.........160 kg
Max. load BGV C1 (12-fold):.........130 kg
Dimensions (LxWxH): ...................710 x 760 x 50 mm
Weight:..........................................11 kg
Every information is subject to change without prior notice. 2012 ©
00065865.DOC Version 1.0
Attention: When installing
speakers to the hexagonal frame,
two persons are needed to hold
and hang the speakers at the
same time in order to keep the
frame balanced. First, loosen the
two ports of the basket screw to
the maximum position, then hang
on the frame. Secondly, install the
speakers on the frame and adjust
their angle as desired. Prevent the
speakers from hitting against each
other. Finally, connect the round
suspending supporter with the
mountaineering button and the
speakers. Use the steel wire and
basket screw for the connection
so as to adjust the speaker angle
and fix the speaker's slope angle.