Pyle PCO885 User manual
19''RackMountPowerConditioner
PCO885
3600 Watt Power Conditioner w/ 20 Outlets
www.PyleUSA.com
2
This unit was developed using the expertise of professional sound engineers
and working musicians. You will nd your new unit has superior performance
and greater exibility than any other power conditioner in its price range.
READ THIS MANUAL CAREFULLY TO GET THE MOST OUT OF YOUR NEW UNIT.
Features
For advanced RF/EMI noise ltering and the quietest operation of your
equipment..
• Triple Mode Varistor Surge And Spike Protection
• 4 Front and 16 Rear Outlets (With Room For 4 '' Wall Warts'')
• 15 Amp Rating With Rear Panel Circuit Breaker (UL)
• Rugged Single Rack Space Metal Housing For Maximum Reliability
This products can expose you to a chemical or group of chemicals, which
may include ”Nickel Carbonate” which is known in the state of California to
cause cancer, birth defects, or other reproductive harm. For more info, go to
https://www.p65warnings.ca.gov/.
www.PyleUSA.com
3
IMPORTANT SAFETY INSTRUCTIONS
WARNING! When using electric products, basic precautions should always be
followed, including the following:
1. Read all the instruction before using the product.
2. DO NOT use this product near water (e.g. near a bathtub, washbowl, kitchen sink,
in a wet basement, or near a swimming pool etc.).
3. This product should be used only with a cart or stand that will keep it level and
stable and prevent wobbling.
4. This product, in combination with ampliers, headphones or speakers, may be
capable of producing sound levels that could cause permanent hearing loss.
Do not operate for a long period of time at a high volume level or at a level that
is uncomfortable. If you experience many hearing loss or ringing in the ears,
you should consult an audiologist.
5. The product should be located so that its location or position does not interfere
with its proper ventilation.
6. The product should be located away from heat sources such as radiators, heat
vent, or other devices (including ampliers) that produce heat.
7. The product should be connected to a power supply only of the type described
in the operating instructions or as marked on the product.
8. The power supply cord should:
• Be undamaged
• Never share an outlet or extension cord with other devices so that the outlet’s
extension on cord’s power rating is exceeded.
• Be left plugged into the outlet when left unused for a long period of time.
9. Care should be taken so that objects do not fall into, and liquids are not spilled
through, the enclosure’s openings.
10. The products should be serviced by qualied service personnel when:
A. The power supply cord or the plug has been damaged.
B. Objects have fallen into, or liquid has been spilled onto the product.
C. The product has been exposed to rain.
D. The product does not appear to operate normally or exhibits a marked
change in performance.
E. The product has been dropped, or the enclosure damaged.
11. Do not attempt to service the product beyond what is described in the user-
maintenance instructions. All other servicing should be referred to qualied
service personnel.
12. Do not defeat the safety purpose of the grounding-type plug, which features a
third grounding prong. If this provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
www.PyleUSA.com
4
FRONT & BACK PANEL FEATURES:
1. POWER SWITCH: Outlet switch activates protection and ltration to all outlets.
To turn the unit ON or OFF, press the upper or lower portion of this button.
2. Voltage LED Digital Screen
3. Dual USB Charge (5V/2A): Charge for Mobile-phone
4. 4 FRONT PANEL OUTLETS
5. 16 REAR PANEL OUTLETS: EMI/RFI Filtered, spike/surge protected and switched.
6. CIRCUIT BREAKER: Resettable 15 Amp thermal circuit breaker.
7. POWER CORD: Heavy duty 14-gauge power cord for connection to the
AC Power Mains (115V/60Hz).
INSTALLATION AND OPERATION
1. The Power Conditioners are the perfect accessories for any rack mount system.
Install in the top slot of a standard 19-inch rack, and the 4 Front and16 switched
AC outlets on the rear panel will provide full safety protection to al your rack
equipment. These conditioners protect your delicate electronic equipment by
combining a high voltage varistor surge and transient suppressor with an RFI/EMI
interference lter. The lter helps prevent noise from uorescent lights, motors,
and similar sources of “electronic pollution” from contaminating the AC feed to
your senitive video, audio, vtr or computer circuits.
2. Plug Power Cord (7) into a standard grounded 120V outlet.
3. Plug sensitive electronic equipment into the 8 Rear Panel Outlets (4)
4. Turn Outlet Power Switch (1) to “ON” position. Lit LED indicates conditioned
power to the connected equipment.
1
765
4
3
2
www.PyleUSA.com
5
5. MAXIMUM LOAD:
The Power Conditioners 4 Front and16 Rear
Panel Outlets are rated at 15 amps total load
(or 3600W at 120VAC). If this maximum load is
exceeded, the Circuit Breaker will trip, cutting
off power to all connected equipment in your
rack. If this happens, reduce the load by
unplugging one or more units from the power
conditioner, and push the circuit breaker to
reset it.
FEATURES:
• Triple Mode Varistor Surge And Spike Protection
• 16 Rear Outlets (With Room For 4 '' Wall Warts'')
Controlled By A Front Panel Switch
• 4 Front Outlets
• 2 USB Front Outlets (5V x 2A)
• Digital Voltage Display Screen
• 15 Amp Rating With Rear Panel Circuit Breaker (UL)
• Rugged Single Rack Space Metal Housing For Maximum Reliability
• Eliminates Unwanted Radio Frequency Interference (RFI)
and Electromagnetic Interference (EMI)
• Overload and Surge Protection
• 2U Rack Mountable
• Steel Front Panel and Chassis
• Push to Reset
WHAT'S IN THE BOX:
• 20-Outlet Rack Mount Power Conditioner
TECHNICAL SPECS:
• Power Supply: 120V/60Hz, UL Standard Socket
• Construction Material: Iron
• 6.56 Foot Power Cord
• Peak Impulse Current: 1500 Amps
• Product Dimensions (L x W x H): 48X18.5X9 cm 19'' x 7.28'' x 3.54'' -inches
Table of contents
