Pyle PLPTS1 Instructions for use

PLPTS1
Professional DJ Grade Laptop/Notebook Computer Rolling Stand
Construction Manual
Visit us online @
www.PyleAudio.com
All manuals and user guides at all-guides.com
all-guides.com

Included parts:
8 x short screws
4 x long screws
4 x nuts
4 x adjustable clamps
4 x wheels
1 x I-bar
1 x T-bar
1 x main plate
1 x small plate
You will need a Phillips-head screwdriver to assemble your stand.
Constructing the PLPTS1.
1. Start by laying out the I-bar upside down, exposing a screw
hole at each corner:
All manuals and user guides at all-guides.com

2. Screw a wheel into each corner:
All manuals and user guides at all-guides.com

3. Screw the T-bar into the I-bar using the four long screws and
nuts:
All manuals and user guides at all-guides.com

4. Attach the adjustable clamps to the T-bar. Unscrew the clamp,
pop them onto the bar, and then screw the clamp back in.
All manuals and user guides at all-guides.com

5. Attach the main plate to the clamps on the longer end of the T-
bar and the small plate to the shorter end using the included short
screws.
All manuals and user guides at all-guides.com
all-guides.com

6. You’re done! You can adjust the height of your stand using the
metal lock on the T-bar:
All manuals and user guides at all-guides.com