Pyle PMKS18 User manual

www.pyleaudio.com
User Manual
1. Place the larger stand pole onto the hole of the round base, and
screw to tighten it onto the base bottom.
2. Screw the double-mic holder-device on the top of the pole, then
place and tighten the mic holders.
3. Tighten the brace firmly to allow proper and secure mic holding.
4. Loosen the brace on the pole and adjust it to the desired height.
5. Tighten the brace securely afterwards.
Headquarters: 1600 63rd Street
Brooklyn, NY 11204 – USA
Toll Free: (800) 444 – 5671
Tel: (718) 236 – 8000 Fax: (718) 236 – 2400
www.pyleaudio.com
PMKS18 - Micro
p
hone Stand