Pyle JOVIAL JOVGF42 User manual

www.PyleUSA.com
2
WARNING:
• For your own safety, please read and understand these
warnings and keep this user guide for future reference.
• Always make sure the cart is fully extended and locked
before use. Always make sure the cart is folded and locked
properly before lifting or transporting.
• Do not run while using this product.
• Do not use accessories other than those designed for use
with your cart.
• Keep all packing materials away from children and recycle
where possible or where required by law.
MAINTENANCE
• To clean the trolley, wipe with a soft, dry cloth.
• Car polish may be used to maintain nish.
• Lubricate moving parts every 6 months.
WARNING:
• Keep hands and ngers away from moving or sliding parts!
• Always keep control of the Golf Push Cart -
Do not let it run down hills without full control.

PARTS LIST
AFoam handle
BUmbrella Holder Base
CScorecard Holder
DHand Grip
ESliding Lock
FUpper Bracket
GJoint
HMain Frame Tube
ILeg Bracket
J2 Holes Leg Frame
J1 3 Holes Leg Frame
KLeft Wheel Mechanism
K1 Right Wheel Mechanism
LAnti-Splay Wire
MRear Wheel
NLower Bracket
PFront Wheel
QLeft Weight Stabilizer
Q1 Right Weight Stabilizer
www.PyleUSA.com
3
A
B
D
C
E
F
G
H
Q
I
K
Q1
JJ1
L
M
K1
N
P

ASSEMBLY STEPS
Fig. 2
Fig. 3
Lift the handle to level
position as Fig. 1
Move the slide lock downside and lock
to upper bracket as Fig. 2
www.PyleUSA.com
4
Fig. 1
Press the button on the wheel holder
to assemble the rear wheel as Fig. 3.
Button
M6*20mm
UP
M6*22mm
Plastic piece
Remove the screws and Plastic piece as Fig. 4. Take out the xed steel piece from instruction
PE bag, then going the screws through the holes and keep the "up" toward front as Fig. 5.
Fig. 4 Fig. 5
Fig. 6
Completely unfolding
and assembly as Fig. 6.

FOLDING STEPS SCORECARD HOLDER
SLIDE LOCK MECHANISM FOOT BRAKE MECHANISM
www.PyleUSA.com
5
Hole
Pin
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Press the button to release the
front wheel, then fold until the pin
inserts in the hole as Fig. 7and 8.
Press button to adjust the
scorecard holder to required
height position Fig. 10.
Move the slide lock up to
release the handle as Fig. 9.
Fig. 11
Fig. 12
Fig. 13
Press the button and adjust the slide
lock to required handle height as Fig. 11.
Adjustable handle with 4
positions height as Fig. 12.
Push on the brake pedal to stop the rear
wheel and pull o to release as Fig. 13.

Fig. 2Fig. 1 Fig. 3
www.PyleUSA.com
6
FRONT WHEEL ADJUSTMENT MECHANISM
1. If during use, you nd the cart
veers to the right or left, please see
the instructions to correct this
problem. (Fig.1)
2. If the cart veers to the left, face the
front wheel of the cart and use the
Allen wrench provided to screw
the right bolt counterclockwise or
the left bolt clockwise until the
front wheel is centered between
the front fork. (Fig.2)
3. If the cart veers to the right, face
the front wheel of the cart and use
the Allen wrench provided to screw
the left bolt counterclockwise or
the right bolt clockwise until the
front wheel is centered between
the front fork. (Fig.3)

FEATURES:
• New Deluxe Scorecard Holder
• Upper and Lower Bracket with Strap
• Foam Handle Grip
• Ergonomic Padded Adjustable Handle
• Includes Scorecard Holder, and Patented Bag Holder
• Simple Quick Braking System
• Durable and Compact Size for Easy Storage and Transportation
• Easy to Fold and Unfold
• Designed for Multiple Pushing Positions
WHAT'S IN THE BOX:
• (1) 3-Wheel Golf Push Cart
TECHNICAL SPECS:
• Construction Material: Steel Frame
• Max. Load Capacity: 33.1 lbs.
• Front Wheel Size: 8'' -inches
• Rear Wheels Size: 10.5'' -inches
• Folded Product Dimension (L x W x H): 14.9" x 18.7" x 35.3" -inches
• Unfolded Product Dimension (L x W x H): 27.1" x 53.5" x 46.8" -inches
www.PyleUSA.com
7
3. If the cart veers to the right, face
the front wheel of the cart and use
the Allen wrench provided to screw
the left bolt counterclockwise or
the right bolt clockwise until the
front wheel is centered between
the front fork. (Fig.3)

Questions? Comments?
We are here to help!
Phone: [phone]
Email: [e-mail]