Pyramid GA110 User manual

Owner's Manual
GA110
Guitar Amplifier
1
4
www.pyramidcaraudio.com
www.pyramidcaraudio.com

1) Power Switch: Switches amplifier on/off.
2) Power LED:Illuminates when power is switched on.
3) Input Jack: Connect your instrument to this jack.
4) Volume: This sets the volume gain level.
5) Bass: This control adjusts the low frequency level.
6) Treble: This control adjusts the high frequency level.
7) Phones Jack:This is your headphone connection.
Inserting the headphones disables the internal speaker
(great for practicing).
1) Voltage Selector: AC 110/220 Volt Selectable Switch.
2) Power Cord: Connect cord to an AC outlet.
Troubleshooting
Distorted Sound:
Check if the amplifier is overdriven. If it is, you will
have to turn the level down.
Check signal source.
Signal sounds discolored:
Check and adjust the EQ settings.
Ensure you are using quality cables.
Check signal source.
No Sound:
Check connections.
Try a different cable.
Check level on amplifier.
Confirm amplifier is getting a signal.
Make sure nothing is plugged into the Phones jack.
Intermittent Output:
Check connections.
Try a different cable.
Specifications
1 2 345 7
1 2
Model Driver RMS Peak Dimensions Weight
GA110 20W 150W
5.25" High
Definition
Speaker
W=8 2/3"
H=9 3/8"
D=4 3/4
6.48 lbs
23
6