Qomo QPC100W User manual




QPC100W
4KWirelessDocumentCamera
User Manual
















Wi-FiConnection
Instructions
V1.1

Wi-FiAPModeConnection
1. Toggle the switch on the side of the unit to the Wi-Fi mode. The Wi-Fi LED
indicator will emit a green flashing light.
2. Open the wireless network list on the computer then select the
[QOMO_5G_xxxxxx] in the network list and input the password for

connection (default: 88889999) to start the connection.
3. When the connection is successful, the Wi-Fi LED indicator will emit a solid
green light.
4. Launch the QCapture Pro software and select the mode “Direct Wi-Fi (AP Mode)
Connection”.

Please note: When the direct Wi-Fi AP mode is connected, the Internet will be
disconnected.
WI-FIClient(STA)ModeConnection
1. Toggle the switch on the side of the unit to the Wi-Fi mode. The Wi-Fi LED
indicator will emit a blue flashing light.
1. Open the wireless network list on the computer then select the
[QOMO_5G_xxxxxx] in the network list and input the password for

connection (default: 88889999) to start the connection.
2. Open the web browser and enter the default IP [192.168.100.1] in the address bar.
3. Enter the login account [admin] and default password [9999] and click Login.

5. After logging in to the web page, you can access a live preview and configure the
settings on the web page. When the STA mode is configured, launch QCapture Pro
software and select the mode “WiFi STA (Client Mode) Connection”.

WebPageSettings
Instructions
V1.1

Web Page Menu Function Description
1. Login Screen
No Item Function Descriptions
1 User Login Account Enter user login account (default: admin)
2 User Password Enter user password (default: 9999)
3 Remember user account
and password
Save user login account and password to the browser.
When you log in next time, there is no need to re-enter
them
4 Login Log into the administrator screen on the website

2. Live Viewing
No Item Function Descriptions
1 Preview window Display the live preview image captured by the
QPC100W
2 Autofocus Automatically adjusts the image for the optimal brightness
and focus
3 Lamp mode toggle
switch
Click lamp mode to toggle the light switch: off / brightness
1 / brightness 2 / brightness 3
4 Zoom In Zoom in image
5 Zoom Out Zoom out image
6 Rotate the image Rotate the image: 0° / 90° / 180° / 270° / Flip / Mirror
7 Logout Log out of the web page
1
3
4
2
7
5
6

3. RTSP Streaming Settings
No Item Function Descriptions
1 Resolution Show or set the RTSP output resolution and fps
2 Bit Rate (kbps) Show or set the RTSP Bit rate (0 ~ 20000)
3 Port Number Set the RTSP port (0 ~ 10000)
4 Audio Setting Turn on/off RTSP audio
5 RTSP URL Show current RTSP URL connection
6 Save Save and change the RTSP streaming settings
7 Cancel Cancel without saving
8 Default Restore to default settings
1
2
3
6
4
5
7 8

4. Wi-Fi Setting (Access Point Mode)
No Item Function Descriptions
1 Wi-Fi Mode Select Access Point or Client Mode
2 Wi-Fi 5G/2.4G Switch between 5G / 2.4G under Wi-Fi Access
Point mode
3 Device Name (SSID) Device name of wireless network
4 Channel Select the channel based on different regions
5 Security Wi-Fi encryption setting
6 Password Connect the Wi-Fi SSID password
7 Show Password Show the Wi-Fi SSID password
8 Save Save and change the wireless network settings
9 Cancel Cancel without saving
1
2
3
4
6
5
7
8 9

5. Wi-Fi Setting (Client Mode)
No Item Function Descriptions
1 Wi-Fi Mode Select Access Point or Client Mode
2 Scan Scan nearby wireless network devices
3 Disconnection Disconnect from current wireless network device
4 Remove Remove the selected wireless network device from the list
5
List of Wi-Fi Wireless
Network Device
Names
Click the wireless device and the following image will be displayed.
Enter the password to connect to various wireless network devices
6 Device Name Device name of wireless network
7 Connection Status
Display the wireless network device to which QOMO QPC100W is
currently connected to. If connected, the corresponding field of the
wireless device will display “Connected”, otherwise it will stay blank
8 Encryption The current encryption setting of the wireless network device
9 Signal Status Show the degree of the Wi-Fi signal
1
2 3
6 7 8 9
4 5