QQZM T5008 User manual
www.zmvideo.com
Copyright© Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 1
User Manual
Full HD Cube Wireless IP Network Camera
Model: T5008
www.zmvideo.com
Copyright© Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 2
STATEMENT
This user manual may not describe some technical item in details / correctly or there is
some typographical error. If you can’t solve your problem according to this manual, please call /
email us directly.
This manual will be updated aperiodically without any prior notice.
PRECAUTIONS FOR USE
1. OperatingEnvironment
Keep away from high temperature environment and direct sunlight
Keep it dry. Power it off when it watered
Device should not be subjected to excessive heat(-10℃~+50℃) or moisture (85%RH)
Device should be horizontal installation or wall mount installation.
Device should avoid installation inviolent shock place
Please use Power Adapter and other accessories come with camera
2. Transportation
Please use the original carton/box when carry the camera in case damage the device
caused by the shaking and accident:
Avoid transporting in overheated / supper cooled environment incase of dew in the device
and influence service life;
Avoid live-line carrying the camera in case damage the main board.
3. PasswordProtection:
CHANGE Camera Password and REMEMBER the New One!
Setthe PC enter password to prevent the video/camera setting leakage.
www.zmvideo.com
Copyright© Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 3
Table of Contents
1 Overview .............................................................................................................................. 4
2. Access the Wireless IP Camera....................................................................................6
2.1 Access the Wireless IP Camera through App...........................................................................6
2.1.1 Download and Install App: .........................................................................................6
2.1.2 Connect Camera to Wi-Fi with Smart Link Function .......................................................6
2.1.3 Connect Camera to Wi-Fi with Access Point Function ....................................................8
2.2 Access the Wireless IP Camera via PC CMS........................................................................... 10
2.2.1 Download and Install PC CMS ................................................................................... 10
2.2.2 Login IP Camera Client ............................................................................................. 10
2.2.3 Adding IP Camera Device ......................................................................................... 11
3. Operation of Wireless IP Camera by CMS ...............................................................13
3.1 Wi-Fi Setting .................................................................................................................... 13
3.2 PT and Color Setting.......................................................................................................... 14
3.2.1 PT Control Panel ..................................................................................................... 14
3.2.2 Color Control Panel ................................................................................................. 14
3.2.3 IR-Cut Filter Control ................................................................................................ 14
3.3 Record, Snapshot and Two way Audio ................................................................................. 15
3.3.1 Operation of alarm, snapshot and two way audio........................................................ 15
3.3.2 Record onto SD Card................................................................................................ 15
3.3.3 Schedule Record ..................................................................................................... 16
3.3.4 Setting Picture and video file path............................................................................. 16
3.4 Playback Video ................................................................................................................. 17
3.4.1 Playback Video Recorded onto Local Computer .......................................................... 17
3.4.2 Remote Playback Video from SD Card........................................................................ 17
3.5 OSD Setting...................................................................................................................... 18
3.6 Time Setting .................................................................................................................... 19
3.7 Camera Password and Factory Reset ................................................................................... 19
3.7.1 Password of Camera................................................................................................ 19
3.7.2 Factory Reset.......................................................................................................... 20
3.7.3 Password of Client Software ..................................................................................... 20
4. Operation of Wireless IP Camera by App.................................................................21
4.1 Wi-Fi Setting .................................................................................................................... 21
4.2 Basic Operation ................................................................................................................ 21
4.3 Change Password.............................................................................................................. 21
4.4 Zoom .............................................................................................................................. 22
4.5 Alarm Setting ................................................................................................................... 22
4.6 Reverse P/T...................................................................................................................... 22
4.7 Schedule Alarm ................................................................................................................ 23
4.8 More Setting.................................................................................................................... 23
4.8.1 Network Setting...................................................................................................... 24
4.8.2 OSD Setting............................................................................................................ 24
4.8.3 Restore to Factory Setting ........................................................................................ 24
4.8.4 SD Card Management.............................................................................................. 25
4.9 Picture preview and video playback .................................................................................... 25
4.10 Alarm Push Setting and Live Stream .................................................................................. 26
www.zmvideo.com
Copyright© Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 4
1 Overview
The N5008 Cube Wireless IP Camera is an integrated wireless IP Network Digital Camera with a
2.0MP (1920*1080) CMOS sensor, Wireless unit, IR Board etc. It works basing on the TCP/IP protocol
and P2P technology, help to bring the quality video to your PC/Tablet/Laptop/Smart Phone in real time
both in Local Network and over the Internet simply. The camera is designed for indoor surveillance
application such as the home, school, office, shop, hospital, warehouse etc.
It uses the high-performance chip to realize the audio & video acquisition, compression and
transmission. The industry-standard H.264 video compression technology helps to reduce the video file
sizes; contributes to less bandwidth, higher picture quality and smoother video transmission. The free
Windows OS Central Management System and Android/IOS App will also help to access to camera
anytime anywhere.
1.1 Key Feature
Standard H.264 video compression algorithm to meet the transmission of high definition
video under narrow bandwidth network;
Supports 3-level Video Quality Setting;
Advanced P2P technology supports Plug and Play;
Support Voice Prompt;
Resolution: 2.0 Mega-Pixel (1920×1080);
IR night vision (Range:8 Meter);
Supports IR-Cut and the auto/manual filter change;
Providing free Windows OS Central Management Software to manage multi-cameras;
Providing Phone APPs for Android and IOS users;
Support 4 Time Digital Zoom on PC;
Supports Remote/Local snapshot, Two-way Audio, Video Recording anytime anywhere;
Support Remote/Local Video Playback;
6-zone Motion detection alert via email or Push Notification by Smartphone;
Support s Color(Brightness, Contrast, Saturation) Adjustment;
Supports OSD Setting, Time Setting and Password Change;
Wi-Fi compliant with wireless standards IEEE 802.11b/g/n;
Supports Access Point Connection and Smart link Wi-Fi Connection;
Supports WPA and WPA2 Encryption;
Supports multiple network protocols: TCP /IP /UDP /DHCP /DDNS / UPNP/NTP;
www.zmvideo.com
Copyright© Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 5
1.2 Read BeforeUse
Please check all contents received are complete according to the Package Contents below. Before
the Wireless IP Camera is installed, please read this manual intensively and follow instructions step by
step to avoid damage due to faulty assembly or transportation.
1.3 PackageContents
Wireless IP Camera ×1
Mounting Bracket ×1
Power Adaptor ×1
Micro USB Cable ×1
Screws ×1
CD ×1
Quick Start Guide ×1
Certificate ofApproval ×1
1.4 PhysicalDescription
Mega Pixel Lens
Light Dependent Resistor
Hidden IR Led
Power Port
Speaker
128G TF Card Slot
www.zmvideo.com
Copyright© Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 6
2. Access the Wireless IP Camera
2.1 Access the Wireless IP Camera through App
2.1.1 Download and Install App:
Download and install “Qvision”from CD Or scan QR Code to install below:
2.1.2 Connect Camera to Wi-Fi with Smart Link Function
Open WLAN Service in Smartphoneand Connect to the Wi-Fi like below:
Take camera close to wireless router and power on Camera. 20s later, A voice will
raise ”Please use smartphone client to add device and configure Wi-Fi network”;
Open ”Qvision”app and press button “+”to add camera:
Scan to add the camera device
Android App
IOS App
www.zmvideo.com
Copyright© Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 7
Press “Configure Wi-FiNetwork”button and click “Hear the Voice”button
Enter Wi-Fi Password, operate according to the device voice prompt like below:
www.zmvideo.com
Copyright© Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 8
2.1.3 Connect Camera to Wi-Fi with Access Point Function
Set your smart phone as a portable hotspot device (SSID:qqzm1224 and
Password:12345678) like below:
Power on camera. Then the camera will connect to the portable hotspot
automatically. Then open “Qvision” app, scan to Add the Camera to App
Visit the Camera
www.zmvideo.com
Copyright© Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 9
Click “Setting”and Select the “Configure Wi-Fi”Tag to search the Wi-FiSSID
Select the right Wi-Fi and Input the Password to set it up.
After setting, close app and connect your smart phone to wireless router. Open
“Qvision” and begin monitoring via smart phone in LAN/WAN
Note:
Please make sure your Wi-Fi SSID and
Password have no special character,
such as space, question mark etc. It is
suggested that the Wi-Fi will work
more smoothly with number, letter or
the combination of number and letter.
www.zmvideo.com
Copyright © Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 10
2.2 Access the Wireless IP Camera via PC CMS
2.2.1 Download and Install PC CMS
The Wireless IP Camera supports the Windows OS system; you can get the
installation package on the CD. The name of Windows CMS is “IpCamV”And we will
show how to use the “IpCamV”in the following
The installation package for “IpCamV”is in the directory of “1. Camera Monitoring
Software \For Windows OS”.
After finishing installation, the icon like below will display on your desktop
2.2.2 Login IP Camera Client
Double click the icon to login in; you will see the following interface
After click “Login”, you will see the client interface as below:
Default is “admin”
Default is “123456”
Select the Language
www.zmvideo.com
Copyright © Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 11
2.2.3 Adding IP Camera Device
2.2.3.1 Add Camera in LAN
After set up camera connecting to Wi-Fi, just click “Add”button, cameras connected
to router will be shown in the list:
Tick the camera and click “Add”. Input the camera password, then camera will be
added into the folder “Devices”on the camera list on the left side.
Double Click the device to visit the camera.
2. Tick the Check
box of Cameras that
Connected in LAN
1. Click “Add“Button
3. Click to Add Camera
4. Double click Device
to visit camera.
www.zmvideo.com
Copyright © Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 12
2.2.3.2 Using Context Menu to Add Camera in WAN
You can use this function to add the cameras in LAN or WAN
4. Click “Next”
6. Click “Finished”
7. Double click the camera
added under the folder of
“Device”, you will see the
video successfully
3. Fill in a name of
camera and any
information you
want to describe it
5. Fill in
Device ID
and
Password
1. Right Click folder “Devices”
2. Click “Add Device through ID”
www.zmvideo.com
Copyright © Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 13
3. Operation of Wireless IP Camera by CMS
3.1 Wi-Fi Setting
After about 5-8 seconds, the camera will connect to the Wi-Fi SSID
2. Click “Wi-Fi”
tag
1. Select the video
of the camera
you want to set
Wi-Fi, right click
the mouse, and
click “Setup”
3. Click “search”
5. Input the WIFI password
and click “Connect”
4. Select your Wi-Fi SSID
www.zmvideo.com
Copyright © Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 14
3.2 PT and Color Setting
3.2.1 PT Control Panel
3.2.2 Color Control Panel
3.2.3 IR-Cut Filter Control
Notice: This Function is just for the one which has the IR Cut Filter
1. Brightness Adjustment
2. Saturation Adjustment
3. Contrast Adjustment
4. Saturation Adjustment
5. Image Mirror Setting
6. Restore Color Setting to Factory Default
2. Click “Color”tag
3.Set up“IR CUT”Mode
1. PT Control Arrow
4. Cruise Setting
3. PT Speed Control. Larger NO. means faster
2. Zoom In and Zoom Out
1. Select the video
of the camera
you want to set
IR Cut, right
click the mouse,
and click
“Setup”
www.zmvideo.com
Copyright © Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 15
3.3 Record, Snapshot and Two way Audio
3.3.1 Operation of alarm, snapshot and two way audio
①②③④⑤⑥⑦⑧
No.
Function
Icon
Description
1
Video Quality
Full Definition
Monitor in Best Video Quality
Smooth
Monitor in Medium Video Quality
Top Speed
Monitor in Medium in Best Video Fluency
2
Record Folder
Click to open the video file that recorded on the computer
3
Original Size/Tile
Show the original size of the video
4
Snapshot
Click to capture the current camera image
5
Alarm
When alarm triggered, the “Alarm”button will turn RED.
6
Listen-in
Click “Listen-in” button to hear sound around the camera.
7
Talk Back
Collect voice around you and transmit to the camera side
8
Record
Record the video manually
3.3.2 Record onto SD Card
1. Right click the screen and
select “setup”
2. Select the “Record”tag, to setup
SD Card record Parameters
www.zmvideo.com
Copyright © Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 16
3.3.3 Schedule Record
3.3.4 Setting Picture and video file path
1. Click “Mange”
2. Click “General”
3. Click “Save”to
set snapshot
saving path
4. Click “Save”to set video saving path
1. Click “Manage”
2. Click “Record Manage”
3. Click “Schedule Record”
4. Select Camera
5. Set the schedule of recording, red square means the
camera will record video at this selected time
6. Click “Save”to save the schedule
7. Click “Change”to
set video saving path
8. Click “Setting”to set record
duration of time, for example,
when set 20, every video file
will be 20 minutes
www.zmvideo.com
Copyright © Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 17
3.4 Playback Video
3.4.1 Playback Video Recorded onto Local Computer
3.4.2 Remote Playback Video from SD Card
1. Click “Manage”
2. Click “Record onto
Computer”
4. Set start time and end time, and then click “Search”
5. The video recorded during the selected time will be shown up,
click “Play”to playback the video
3. Select
Camera
5. Click “Record
onto SD Card”
4. The video recorded during the selected time will be shown up, click“Download”,
after the video is downloaded completely, and click “Play”to playback the video
1. Click “Manage”
2. Select
Camera
3. Set start time and end time,
then click “Search”
www.zmvideo.com
Copyright © Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 18
3.5 OSD Setting
1. OSD
2. Switch on the
Time and OSD
3. Input the Letter
(Within 18 characters)
4. Click “Setting”and “OK”
2. Select the video
of the camera
you want to set
OSD, right click
the mouse, and
click “Setup”
2. Time OSD
www.zmvideo.com
Copyright © Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 19
3.6 Time Setting
3.7 Camera Password and Factory Reset
3.7.1 Password of Camera
The camera ID & Password are shown on the label attaching at the bottom of
camera house. We recommend user change password of for your own safety.
Steps of changing camera’s password:
1. Select the camera
you want to change
the password, then
right click the
mouse, and then
click “Setup”
2. Click “Advance Setting”
3. Fill in “New
Password”&“Confirm
Password” and click
“Change”, then click
“Apply”and “OK”
3. Click “Setting”
2. Tick “NTP”, ”Manual”or “From PC”
1. Select “Time Setting””
www.zmvideo.com
Copyright © Shenzhen Quick Zoom Technology Co., Ltd., All Rights Reserved 20
3.7.2 Factory Reset
You can reset the camera to the factory setting like below
3.7.3 Password of Client Software
The default password of the client software is “123456”, we recommend user change
the password after your first login
1. Select the camera
you want to
Restore, then right
click the mouse,
and then click
“Setup”
2. Click “Advance Setting”
3. Click “Res Default”to
reboot the camera
1. Click “Manage”
2. Click “Change Password”
3. Input New Password
4. Click “Change”
This manual suits for next models
1
Table of contents
Other QQZM IP Camera manuals
