QTX Light LUX-LD108W User manual

WWW.QTXLIGHT.COM
LUX-LD108W
TRI Colour Moving hea User Manual
150.449UK

User Manual – LUX-LD108W 150.449UK
2
LUX-LD108W Tri-colour moving hea : For in oor use only
1. General Intro uction :
This moving head features 36 x 3W Tri-colour LEDs, replacing the more
conventional method of RG colour mixing. Each LED can produce any colour
of light right through the visible spectrum resulting in the brightest and best
colour mixing available by LEDs on the market today. It features auto and
sound-to-light modes and 11 channels of DMX which can be programmed with
any universal DMX controller, making it ideal for creating he right atmosphere
in a bars, nightclubs and even stage shows.
Features :
36 x 3W tri-colour LEDs
DMX in/out connections via 3-pin XLR
Ultra bright producing rich colour
Auto and sound activated programs
11 channel DMX (Colour mode, RG 0 - 100%, shutter, dimmer,
Pan, tilt, pan/tilt speed, pan fine, tilt fine
Fan cooled
Mounting bracket supplied
We recommend that this product is used within the guidelines
HSG95
Caution! Please rea this manual carefully before
operating! Damage cause by misuse
is not covere by the warranty!
User Manual – LUX-LD108W 150.449UK
11
14. Disposal :
Please disposal of the unserviceable device according to the current
statutory requirements.
15. Technical specification :
Voltage : 230Vac, 50Hz LED Type : 3W Tri colour
LED : 36 x 3W Tri LED LED Life: 10,000 Hours
Fuse : F5A Total Lumens: 1252
Power Consumption: 108W Beam Angle: 31°
Dimensions : 250 x 220 x 376mm
Weight: 7kg
Note: Conforms to Laser and LED Safety standard SEN60825-1 2007
Manual copywrite protected by QTX Light

User Manual – LUX-LD108W 150.449UK
10
13. DMX Controlling :
DMX Channel Function & Value
000 - 024 RG (DMX mode)
025-049 Auto Program 1
050-074 Auto Program 2
075-099 Auto Program 3
100-124 Auto Program 4
125-149 Auto Program 5
150-174 Auto Program 6
175-199 Auto Program 7
200-224 Auto Program 8
Channel 1
225-255 Sound-active program
Channel 2 000-255 Red brightness 0-100%
Channel 3 000-255 Green brightness 0-100%
Channel 4 000-255 lue brightness 0-100%
000-015 No function CH1 000-024
016-255 Strobe fast to slow
Channel 5
CH1 025-255 000-255 Auto speed fast to slow
Channel 6 000-255 Dimmer right to dark
Channel 7 000-255 Pan course 0-540°
Channel 8 000-255 Tilt course 0-230°
Channel 9 000-255 Pan/Tilt speed fast to slow
Channel 10 000-255 Pan fine adjustment 2.4°
Channel 11 000-255 Tilt fine adjustment 2.4°
User Manual – LUX-LD108W 150.449UK
3
2. Package Contents :
Please check the contents to ensure that the product has been received in
good condition.
Light x 1unit (power lead attached)
User’s Guide x 1pcs
If you find any accessory is missing or the lighting has arrived with any
problems, please contact your local dealer at once. Do not try to fix this item
yourself or you will lose the warranty. Please keep the original package and
invoice for any possible replacement or returned demand.
3. Installation :
Every person involved with the installation, operation and maintenance of this
device should be qualified and follow the instructions of this User Guide. We
recommend that this product is not used for audience scanning and should be
used within the guidelines of radiation of lasers used for display purposes
“HSG95”. When you connect to the main power supply the device will
illuminate and the light effect will change with music when in sound activated
mode.
10. Mounting instruction :
The fixture may be mounted in any position provided there is adequate room
for ventilation. It is important never to obstruct the fan or vent pathway.
Mount the fixture using a clamp. Unscrew the safety screws underneath the
device and fix a G-Clamp to the fixture. After finding desired position tighten
the G-Clamp. When selecting installation location, take into consideration
routine maintenance. Safety cables must always be used. Never mount in
places where the fixture will be exposed to rain, high humidity, extreme
temperatures changes or restricted ventilation.

User Manual – LUX-LD108W 150.449UK
4
4. Caution :
For your safety, please kindly pay attention to all of the warnings below:
Always plug in the power plug last and disconnect from the mains, when
the device is not in use or before cleaning.
Do not install and operate the device in rain or extreme heat, moisture
or dusty environments.
This device is for indoor use only an din a dry environment.
Do not switch on immediately but wait until it reaches to room
temperature, if the device has been exposed to drastic temperature
fluctuations.
Do not shake the device and avoid brute force when installing or
operating
Do not spread the smoke or bubble of effect machine directly to the
device.
Do not use the device during thunderstorms and please disconnect the
power.
Do not use solvents or aggressive detergent to clean the device. Use a
soft and clean cloth.
Do not modify the device or the connected power cord without
authorization.
Use appropriate safety-rope for safety.
Do not stare to the light.
The symbol determines the minimum distance from lighted
objects. The minimum distance between light-output and the
illuminated surface must be more than 0.5m.
User Manual – LUX-LD108W 150.449UK
9
DISPLAY FUNCTION
VALUE
001-501(503)
DMX address (16bt is on, the max value is 501.
M-DM DMX mode
M-AU AUTO mode
MODE
M-SO SOUND mode
8 built-in programs
Pr1-4 means skip
PRCO PR1~8
Pr5-8 means fade
SPCO SP01~15 Auto speed is 0.1~10 seconds each step
STND Run clockwise as DMX value increases
r PAN
REV Run anticlockwise as DMX value decreases
STND Run clockwise as DMX data increase
R TILT
REV Run anticlockwise as DMX data decreases
STND CH7: PAN, CH8: TILT, CH10: P.FINE, CH11: T.FINE
r-PT
REV CH7: PAN, CH8: TILT, CH10: P.FINE, CH11: T.FINE.
ALL Check all channels with motors
PAN Check pan channels
TITL Check tilt channels
RED Check red channels
GREEN Check green channels
TEST
BLUE Check blue channels
STND Display bites normally
DISP
REV Display bytes upside down
REST REST/ON Reset
ON PAN/TILT is 16 bit, CH10: PAN FINE, CH11: TILT
FINE. 16BT
OFF PAN, TILT is 8 bit. CH10, CH11 does not exist.

User Manual – LUX-LD108W 150.449UK
8
12. Digital Display Setting & Function :
FUN: function menu or withdraw the last menu
ENTER: enter the next menu or definite present value.
UP: increase one step each time
DOWN: decrease one step each time.
User Manual – LUX-LD108W 150.449UK
5
6. Connect with power supply:
Use the plug to connect to the main power supply as following.
Line Connection International signal
rown Live L
lue Neutral N
Yellow /Green Earth E
7. Quick Trouble Shooting :
7.1 if the unit is not functional – Check if main power is on and fuse.
7.2 if the unit is not reacting to music – check the unit is in “M-SO” mode on
the display.
8. Replacing Fuse :
Disconnect from the main power supply first, then remove the fuse holder
above the IEC Socket to reveal the fuse. Replace the correct fuse rating as
stated on lighting or user guide. Then, lock the fuse holder cover back into
place.
9. General Maintenance :
To maintain optimum performance and minimize wear, fixtures should be
cleaned frequently. Usage and environment are contributing factors in
determining frequency. As a general rule, fixtures should be cleaned at least
twice a month. Dust build-up reduces light output performance and can cause
overheating. This can lead to reduced lamp life and increased mechanical
wear. e sure to power off fixture before conducting maintenance.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush
to remove dust collected on external vents and internal components. Clean all

User Manual – LUX-LD108W 150.449UK
6
glass when fixture is cold with a mild solution to the cloth or tissue, and drag
dirt and grime to the outside of the lens. Gently polish optical surface until
they free of haze and lint.
The cleaning of internal and external optical lenses and/or mirrors must be
carried out periodically to optimize light output. Cleaning frequently depends
on the environment in which the fixtures operates: damp, smoky or
particularly dirty surroundings can require cleaning fluid. Always dry the parts
carefully. Clean the external optics at least every 20 days.
User Manual – LUX-LD108W 150.449UK
7
11. Layout for the 150.449UK:
1. DMX Input
2. AC Power input
3. Power switch on/off
4. DMX Output