QuantumZERO QZAD02 Operating and safety instructions

Page 1 of 3
Questions? We’re here to help!
[e-mail] | www.quantumzero.in
QuantumZERO™, Yugadi Electronics, 353, 2nd B Cross, 1st Phase, Girinagar, Bangalore 560085, India
QuantumZERO logois trademark or registered trademark of Yugadi Electronics
Welcome Guide
QuantumZERO™ USB 3.0 Gigabit Ethernet Adapter
QZAD02
Introduction
QuantumZERO™ USB 3.0 Gigabit Ethernet Adapter easily adds Gigabit Ethernet network to your laptop,
desktop though a USB port.
Package Content
QuantumZERO™ USB 3.0 Gigabit Ethernet Adapter
Welcome Guide
Specifications
ProductName
USB 3.0 Gigabit EthernetAdapter
ProductModel
QZAD
0
2
Upstream Port
USB 3.0 Type A
Downstream Port
EthernetRJ45
Gigabit EthernetController
ASIX
AX88179
Compatible EthernetStandards
IEEE
802.3, IEEE 802.3u, IEEE 802.3ab
,
IEEE 802.3az
Dimensions
82
x
31
x
22
mm
Weight
45
g
System Supported
W
indows 8.1/8/7/Vista/XP, Mac OS
9or above
Color
Black
Features
Easily add Gigabit Ethernet network through a USB port
Equipped with ASIX AX88179controller - the world's first USB 3.0 to Gigabit Ethernet controller
integrates USB 3.0 PHY and 10/100/1000Mbps Gigabit Ethernet MAC/PHY in a single chip.
Supports full duplex operation (FDX) with IEEE 802.3x flow control and half duplex operation
(HDX) with back-pressure flow control
Supports crossover detection and auto-correction
Supports advanced link down power saving when Ethernet cable is unplugged
Supports Wake-on-LAN and IEEE 802.3az (Energy Efficient Ethernet)

Page 2 of 3
Questions? We’re here to help!
[e-mail] | www.quantumzero.in
QuantumZERO™, Yugadi Electronics, 353, 2nd B Cross, 1st Phase, Girinagar, Bangalore 560085, India
QuantumZERO logois trademark or registered trademark of Yugadi Electronics
LEDs indicate power status and Ethernet connection
USB 3.0, Backward compatible with USB 2.0, USB 1.1
LED light indications
Red light: USB 3.0 - flickering red light indicates data transfer via a USB 3.0 port. This light will not
illuminate if the adapter is plugged into a USB 2.0 port.
Green light: In operation - flickering green light indicates data transfer via a USB 3.0/2.0 /1.1 port.
Blue light: Online - solid blue light indicates successful connection to a network cable.
Installation Guide
On non-Windows XP operating systems
1. Insert the CD driver. A CD menu will load and appear automatically.
2. Select the desired folder for installation and follow the step-by-step onscreen instructions.
3. Upon installation, connect an active Ethernet cable to the adapter's network cable port. Insert the
adapter into your USB port to begin enjoying Internet access.
On Windows XP operating system
1. Insert the product. A pop-up window will automatically report that new hardware has been found.
2. Choose ‘install from a list or specific location [advanced]’, then choose ‘Search for the best driver in
these locations' and ‘include this location in search’.
3. Click 'Browse’ and choose the path: Driver\Windows\WinXP_Vista\WinXP.
4. Click ‘Next' and follow the prompts to complete installation.
5. Upon installation, connect an active Ethernet cable to the adapter's network cable port. Insert the
adapter into your USB port to begin enjoying Internet access.
Warranty
QuantumZERO offers its customers with warranty of 18 months from the date of purchase.
Contact Us
For any queries on the product, please write to us: [e-mail]. We promise to respond to
you at the earliest. We encourage you to claim replacement or refund for any quality related issue with
this product.

Page 3 of 3
Questions? We’re here to help!
[e-mail] | www.quantumzero.in
QuantumZERO™, Yugadi Electronics, 353, 2nd B Cross, 1st Phase, Girinagar, Bangalore 560085, India
QuantumZERO logois trademark or registered trademark of Yugadi Electronics
FCC and CERadiation Norm
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the Federal Communication Commission (FCC) rules.3
CE
This equipment has been tested and found to comply with the limits of the Europe Council Directive on
the Approximation of law of the member states relating to electromagnetic compatibility (89/336/EEC)
according to EN 55022 Class B.
FCC and CE Compliance Statement
These limits are designed to ensure reasonable protection against frequency interference during
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if
not installed or used in accordance with the instruction, may cause harmful interference toradio
communication. However, there is no guarantee thatinterference will not occurin television reception,
which can be determined by turning the equipment off and on. The user is encouraged to try and
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected to.
Caution!
The Federal Communication Commission warns the user that changes or modifications to this unit that
are not expressly approved by the party responsible for compliance, could void the user’s authority to
operate the equipment.