Quintum ITA-200 Product manual

ITA-200 Technical Reference Manual Rev 1.0

___________________________________________________________________

_____________________________________________________________________________________

Intelligent Telephone Adapter Model ITA-200

Technical Reference Manual

Revision 1.0, October 26, 2006

ITA-200 Technical Reference Manual Rev 1.0

___________________________________________________________________

_____________________________________________________________________________________

Contents

Chapter 1: Overview

3

Overview 3

General Specifications 4

Chapter 2: Getting to Know the ITA-200

9

The ITA-200’s Front Panel 9

The ITA-200’s Back Panel 10

Chapter 3: Connecting the ITA-200

11

Connect the ITA-200 Cables 11

Power-Up Sequence 12

Chapter 4: Configuring the ITA-200

13

1. Unit Information tab 14

2. WAN/LAN Configuration tab 15

3. SIP Configuration tab 19

4. Services tab 23

5. Misc. Servers tab 27

6. Maintenance tab 29

Chapter 5: Firmware Upgrade ITA200

31

1. Download firmware. 31

2. Auto Firmware update. 32

3. Special download. 33

Chapter 6: Voice prompts

35

1. List of command prompts. 35

2. Data input for voice prompts menu in ITA200. 36

Chapter 7: Download Config File

38

1. Download configuration file. 38

2. Auto config Download timer. 39

3. Download the configuration file through a voice prompt . 40

Appendix A. Dialing Plan

41

Appendix B. Update File

44

Appendix C. Config File

45

Disclaimer

58

ITA-200 Technical Reference Manual Rev 1.0

___________________________________________________________________

_____________________________________________________________________________________

Chapter 1

Overview

Thanks and congratulations for purchasing the ITA-200, 2-Port Intelligent Telephone Adapter

with Integrated Router (ITA-200).

uintum’s ITA-200 is an innovative and sophisticated access device that enables a user to take

advantage of Voice over Internet Protocol (VoIP) applications and services. In addition, it allows

the user to set up a home or small business network to share a single high-speed Internet

connection.

The WAN Port of the ITA-200 device connects to the Ethernet port of a Broadband Modem

(ADSL or Cable); the LAN Port of the ITA-200 adapter connects to the Ethernet port of the PC,

providing the PC with connectivity to the Internet. At the same time it provides the user with two

(2) additional telephone lines. The typical configuration diagram is shown below.

Figure 1 Typical Configuration.

The ITA-200 uses your broadband connection to deliver high quality voice communication and

features equivalent to, or exceeding, those of the Public Switched Telephone Network (PSTN).

It is compatible with any standard analog telephone set, and it is very easy to install and

configure. In addition to providing quality voice services, the ITA-200’s routing functionalities

allow the user to work in a safe environment protected from the external Internet.

The ITA-200 provides the user with instant connectivity to the Internet and gives the user the

capability of making free calls via the Internet any where in the world to other ITA-200 users.

ITA-200 Technical Reference Manual Rev 1.0

___________________________________________________________________

_____________________________________________________________________________________

The ITA-200 is the ideal device to implement next generation telephone services using Voice

over Internet Protocol (VoIP) technology. It offers clear and compelling benefits for individual or

enterprise’s communications needs. The ITA-200 uses the most reliable and standard protocols

in the market today to ensure compatibility and reliability with existing VoIP networks. The ITA-

200 uses SIP (Session Initiation Protocol) for call signaling and control, T.38 for Fax over IP

networks, DHCP Client and Server for easy installation, HTTP Server for Web Management,

supports 2 compressed voice channels simultaneously (G.729A or G.723.1) for bandwidth

management, a sophisticated uality of Service ( oS) for crystal clear communication, supports

enhanced features such us call waiting, call forwarding, 3-way calling, caller ID and many more

that make the ITA-200 the only solution for your VoIP network.

General Specifications

Interfaces

WAN RJ-45 10/100 Base-T

LAN RJ-45 10/100 Base-T

Phone 1 RJ-11 FXS

Phone 2 RJ-11 FXS

Power

+12 Volts DC, 1 A

Power Adapter: 100-240VAC, 50/60Hz, 1.8m Cord

Power Consumption: 6 Watts

LED’s

Power

Phone 1 status

Phone 2 status

WAN Speed

WAN Link/Activity

LAN Speed

LAN Link/Activity

Operating Temperature:

41 to 113˚F (5 to 45˚C)

Storage Temperature -

13 to 185˚F (-25 to 85˚C)

Relative Humidity:

10 to 90%

Network Protocols

IPv4 - Internet Protocol Version 4

MAC Address (IEEE 802.3)

TCP - Transmission Control Protocol

UDP - User Datagram Protocol

ARP - Address Resolution Protocol

ITA-200 Technical Reference Manual Rev 1.0

___________________________________________________________________

_____________________________________________________________________________________

DNS - Domain Name System

DCHP Client (WAN port) - Dynamic Host Configuration Protocol

DCHP Server (LAN port) - Dynamic Host Configuration Protocol

ICMP - Internet Control Message Protocol

IGMP - Internet Group Management Protocol

CIDR - Classless Inter-Domain Routing

RTP - Real-Time Transport Protocol

RIPv.1/v.2 - Routing Information Protocol

SLIP - Serial Line Internet Protocol

CSLIP - Compressed Serial Line Internet Protocol

PPP - Point-to-Point Protocol

TFTP - Trivial File Transfer Protocol

NFS - Network File System

ONC - Open Network Computing

RPC - Remote Procedure Call

FTP - File Transfer Protocol

RLOGIN - Remote Login

RSH - Remote Shell

Telnet - The Internet Standard Protocol for Remote Login

SNTP - Simple Network Transfer Protocol

NAT - Network Address Translation

oS - uality of Service (Data prioritization)

VPN - Virtual Private Network

PPTP - Point-to-Point Tunneling Protocol

IPSec - Internet Protocol Secured

VoIP Interface Specifications

Two FXS Analog Telephone Ports,

Session Initiation Protocol Ver-2 (SIPv2),

SIP Proxy Redundancy,

NAT Traversal,

STUN,

Voice Codecs: G.711, G.723.1/A, G.726, G.729A/AB/E,

Adjustable Real-Time Audio Volume,

Adjustable Audio Frames per Packet,

FAX Relay (T.38, V.17, V.29, V27ter),

FAX Tone Detection and Pass-through,

Voice Band Data/Modem Tone Detection and Pass-through,

DTMF – In-Band/Out-of-Band (SIP Info),

Call Progress Tone Generation,

Adaptive Jitter Buffer, Full Duplex Audio,

Echo Cancellation (G.165/G.168),

Voice Activity Detection (VAD) with Silence Suppression,

Attenuation/Gain Adjustments,

Message Waiting Indicator (MWI) Tones and Visual,

ITA-200 Technical Reference Manual Rev 1.0

___________________________________________________________________

_____________________________________________________________________________________

Reverse Polarity Control

Supported Enhanced Telephone Services

Call Waiting/Cancel Call Waiting

Caller ID with Name & Number

Call Waiting Caller ID with Name & Number

Caller ID Block

Call Forwarding: BNA, Busy and All Calls

Do Not Disturb (DND)

Call Transfer

Callback on Busy

Call Return

Call Rejection (general and selective)

Distinctive Ringing

Voice Mail/Message Waiting Warning Tone & Lamping

3-Way Conference Calling

Off-Hook Warning Tone

Speed Dialing

Hotline Dialing

Security

HTTP Web Configuration Password Protected

Administrator and End-User Passwords

Multiple End-Users Password

Telnet Password Protected

SIP Digest – Encrypted Authentication via MD5

Provisioning

Integrated Web Server for Configuration

Automatic Provisioning and Configuration via TFTP and HTTP

Syslog Support

Subscriber Line Interface Circuit (SLIC) Specifications

Ring Voltage 60-90 Vrms Configurable

Ring Frequency 10 Hz – 40 Hz

Ring Waveform Trapezoidal and Sinusoidal

Maximum Ring Load 3 REN

On-Hook Voltage (T/R) 50 V

Off-Hook Current 25 mA

Terminating Impedance Configurable North America 600 ohms, European CTR21

ITA-200 Technical Reference Manual Rev 1.0

___________________________________________________________________

_____________________________________________________________________________________

Regulatory Compliance

FCC Part 15 Class B

VCCI

CE Mark

Front View

Back View

ITA-200 Technical Reference Manual Rev 1.0

___________________________________________________________________

_____________________________________________________________________________________

Standing View

ITA-200 Technical Reference Manual Rev 1.0

___________________________________________________________________

_____________________________________________________________________________________

Chapter 2

Getting to Know the ITA-200

The ITA-200’s Front Panel

LED’s on the ITA-200 front panel are shown in Figure 2.

Figure 2. ITA-200 Front Panel LED description.

Power Green ITA-200 is powered on.

Phone 1 &

Phone 2

Green The telephone is off-hook.

Off The telephone is on-hook and in service.

Blinking (Slow) The telephone is not in service or not registered with a

SIP server.

Blinking (Fast) The unit is downloading firmware from the TFTP or

HTTP server.

WAN Speed Off 10 Mbps connection.

Yellow 100 Mbps connection.

WAN Link/

Activity

Blinking There is data transmission in the WAN port.

LAN Speed Off 10 Mbps connection.

Yellow 100 Mbps connection.

LAN Link/

Activity

Blinking There is data transmission in the LAN port.

ITA-200 Technical Reference Manual Rev 1.0

___________________________________________________________________

_____________________________________________________________________________________

The ITA-200’s Back Panel

The access to the interfaces is located in the back panel of the ITA-200. The ports are described

below in Figure 3.

Figure 3. ITA-200 Back Panel Interfaces

WAN RJ-45

This WAN (Wide Area Network) port connects to Ethernet

network devices, such as the ADSL/Cable modem, hub,

switch or router.

LAN RJ-45 This LAN (Local Area Network) port connects to the PC.

Phone 1 and Phone 2 RJ-11 telephone sockets that connect to the analog

telephone devices or facsimile machines.

Reset Button The reset button can be use in two ways: reset the ITA-200 to

factory defaults by pressing the Reset button for more than

five (5) seconds; or restart the ITA-200 by pressing the Reset

button for less than two (2) seconds.

Power

Connects to the power adapter. The power requirement for

ITA-200 is +12VDC, 1 A.

Important: Factory reset to the ITA-200 will erase all of your settings (SIP

servers, phone numbers, WAN/LAN settings, etc.) and replace them with the

factory defaults. Do not perform a factory reset to the ITA-200 if you want to

retain these settings.

Quintum ITA-200 Product manual

Popular Adapter manuals by other brands