The top plate (3) is right-angled with the
middle plate (4).
And turn both tablet
support at the same time (use both hands).
Make sure you turn the tablet support until
the hook is in front of the tablet slot
Move the tablet hook into
the slot (1) and then move the hook around
the middle plate (2) until the hook is
right-angled with the middle plate
Make sure that the hooks of the tablet sup-
ports go into the tablet slots, while (1) lifting
the top plate until it is vertical.
Make sure that the tablet support is hooked
around the middle plate. Your Tablet stand is
ready for use
3
1
2
1
4
Tablet Stand Instruction Steps
1
2
8 9
10 11
12 13
