R-Go Riser Duo User manual

Step A
Step B
1Lift the top plate of the stand until the top plate
(a) is in a 90° angle with the middle plate (b)
2Turn both tablet supports at the same time (use both
hands)
Step C
3 Place the tablet supports in the tablet slots
Step D
4 Move the tablet supports so that they are clamped
around the middle plate. Your tablet stand is ready for use!
1
R-Go Riser Duo
Tablet stand
Instruction manual for tablet use
To set up the tablet stand, first
follow steps A, B and C on the other
side of the page.
a
b
2
90°

R-Go Riser Duo
Laptop stand
Instruction manual for laptop use
Step A
1Open the document holder
2 Turn the whole stand
Step B
3Grab the top and middle plate of the stand and leave
the bottom on the table and open the stand
1
2
Step C
4Put the stand in the desired slot
of your height
3
4
Step D
5Lift the top plate of the stand
6Turn both laptop supports. Make sure that both
laptop supports are in a 90° angle to the top plate
7Lower the top plate and make sure that both laptop
supports go into the laptop slot
5
6
7
7
Turn the page for
instructions on how to set
up as a tablet stand