Rainbow Play Systems Commercial Design C User manual

COPYRIGHT 2019 RAINBOW PLAY SYSTEMS, INC. ALL RIGHTS RESERVED
RAINBOW RESERVES THE RIGHT TO MAKE CHANGES AND MODIFICATIONS TO THIS PRODUCT.
!
WARNING: This manual contains important information about how to assemble, locate, use, and
maintain this playground equipment. Read this manual before you start assembly. Follow all
instructions. Be sure to educate all children who use this playground and all adult supervisors about
the rules for safe use that are contained in this manual.
Keep this Manual for future reference and to remind you of how to safely use and maintain this equipment.
Commercial Design C
Assembly Instructions
5-70-0460
(Rev 1 - 2/19/19)
Contains Assembly, Use, and Maintenance Instructions
NOTICE: This commercial play structure is intended for
use by children ages 2-12.

Welcome to RAINBOW
IT IS VERY IMPORTANT YOU READ THIS ENTIRE MANUAL PRIOR TO INSTALLATION!
Welcome to our ready-to-build commercial play structures. Ease of assembly has been pre-engineered into our
product. We provide step-by-step installation and maintenance instructions so more time can be spent playing!
Purchaser and Contractor: Reading this entire manual will help to ensure the safety of the children who will be
playing on the equipment after installation of the structure has been completed .
Purchaser/Maintenance Manager: Keep these instructions on file for future reference. Retaining and referencing
this manual will provide proper maintenance and inspection recommendations for the play structure. This manual
will provide a necessary and useful reference when submitting any warranty information for replacement parts.
Storage Notification: Play structures should be installed as soon as possible (within a few days) when
received at the intended job site location. If immediate installation is not possible, equipment should be stored in a
controlled environment (warehouse, garage, storage containers, etc...) to reduce the likelihood of damage due to
exposure and/or improper storage.
Play Structure Site Planning
When selecting your play site, always keep the child's safety in mind. Below are some recommendations that
should help you achieve a safe play area.
1. Determine the location intended for the play structure to be installed. Reference the plan view, provided in this
manual, for your play structure to determine the "use zone" boundaries required for your play structure. Locate
all structures within your site to ensure "use zone" clearances and guidelines are met as specified in this
manual.
2. The play system should be located on solid level ground free of objects that could cause injury such as, but not
limited to, tree stumps, roots, and large rocks. Stationary components such as ladders and slides must be no
less than SIX FEET (1.8 meters) from any structure or obstruction such as a fence, garage, house, tree or
overhanging branches, electrical wires or clotheslines. Any swinging equipment must be a minimum distance of
TWICE the height of the swing beam away from any structures or obstructions as specified above. We also
recommend that you do not install your play system near a lake, river, swimming pool or other water hazards.
3. In addition to the "use zone" boundaries listed in #2, a no-encroachment zone must be provided for slides with a
starting platform height of 47" or more and swinging equipment. This is a zone consisting of an obstacle-free
area with surfacing that does not need to conform to the protective surfacing guidelines found on page 2 in this
manual.
4. All objects that could cause injury such as, but not limited to, asphalt, concrete, rocks, trees, roots, fences,
overhanging branches, and other hard structures must be removed or relocated from the intended site prior to
installation.
5. Ensure site is graded level to create the safest possible play environment. The customer and contractor are
responsible for ensuring the local soil conditions allow proper drainage from the play structure and area of play.
Special preparations may need to be completed prior to the installation to ensure proper drainage can be
achieved. Inquire with local contractors and city developers in your area for recommendations.
6. If anchoring your play system, all underground utilities must be located in the use zone prior to assembly of the
play structure.
7. Try to locate the slide out of direct sunlight to reduce the likelihood of serious burns. A slide that faces north will
receive the least direct sunlight.
8. It is recommended not to place a set on sandy soil or loose fill as it may require additional anchoring in that
situation.
9. Do not install your play system over concrete, asphalt, packed earth, grass, carpet, or any other hard surface.
A fall onto a hard surface can result in serious injury to the play structure user.
10. If the job site must be left unattended or build of structure is not complete, rope or fence off all unfinished
equipment to keep children from using equipment until the play structure is completed and ready for use.
1

Choosing a Surfacing Material
The consumer shall provide playground surfacing materials under and around commercial play equipment that conforms to the
recommendations of the U.S. Consumer Product Safety Commission's Public Playground Safety Handbook publications #325. A copy
of the section relating to surfacing materials is included in the installation instructions. Free copies of this handbook are available on line at
www.cpsc.gov or by contacting the CPSC Publications Office in Washington D.C. 20207.
The entire use zone, around and underneath the play structure, must have adequate impact attenuating surfacing material. The surfacing
material provider should have a specified Critical Height Value for the surfacing material. The Critical Height rating should be at least the
height of the highest designated play surface on the equipment. The Rainbow Play Systems Commercial Play Structures have a Critical Fall
Height of 6' . Determine adequate surfacing based on ratings in accordance with A.S.T.M. Standard F1292. Contact the American Society
for Testing and Materials (ASTM) by calling 610-832-9585, or their website at ww.astm.org to receive a copy of the A.S.T.M. Standard F1292.
There are two primary options available for surfacing public playgrounds: unitary and loose-fill materials. If unitary options are used, contact
the manufacturer for the critical height rating for their products. If loose-fill materials are used, refer to Table 2 of the CPSC Public
Playground Safety Handbook for critical height values of suggested materials. Rainbow Play Systems recommends a minimum of 12 inches
of loose-fill material. It is recommended to use containment, such as digging out around the perimeter and/or lining the perimeter with
landscape edging for surfacing materials.
The following information is intended to assist in comparing the relative shock-absorbing properties of various materials. No particular
material is recommended over another. However, each material is only effective when properly maintained. Materials should be checked
periodically and replenished to maintain correct depth as determined necessary for your equipment. The choice of a material depends on the
type and height of your playground equipment, the availability of the material in your area, and its cost.
Table 3.1 from Tips for Public Playground Safety publications #324 from U.S. Consumer Product Safety Commission has been provided
below. This table lists the maximum height from which a child would not be expected to sustain a life-threatening head injury in a fall onto
four different loose-fill surfacing materials if they are installed and maintained at depths of 6, 9, and 12 inches. However, it should be
recognized that all injuries due to falls cannot be prevented no matter what surfacing material is used.
Commercial Design C Data
Package # Set Dimensions (W x L x H) Play Zone
Critical Fall
Height
Number of
Children
Maximum
Combined Weight
3A, 3B, 3C 30 1/2' x 38' x 13 1/2' 42 1/2' x 50' 5' 44 - 50 6750 lbs.
*Note: Unit's height without wood roof is approximately 8 1/2'.
TABLE 3.1 Fall Height in Feet From Which a Life Threatening Head Injury Would Not Be Expected
Type of Material 6 in. depth 9 in. depth 12 in. depth
Double Shredded Bark Mulch 6 ft. 10 ft. 11 ft.
Wood Chips 6 ft. 7 ft. 12 ft.
Fine Sand 5 ft. 5 ft. 9 ft.
Fine Gravel 6 ft. 7 ft. 10 ft.
This table can be found at: http://www.cpsc.gov/CPSCPUB/PUBS/Playfct.pdf
TABLE 2. Minimum Compressed Loose-fill Surfacing Depths
Inches of Loose-Fill Material protects to Fall Height (feet)
6* Shredded/recycled rubber 10
9 Sand 4
9 Pea Gravel 5
9 Wood mulch (non-CCA) 7
9 Wood chips 10
*Shredded/recycled rubber loose-fill surfacing does not compress in the same manner as other loose-fill
materials. However, care should be taken to maintain a constant depth as displacement may still occur.
This table can be found at:
http://www.cpsc.gov/cpscpub/pubs/325.pdf
2

No-encroachment zone
42 1/2'
50'
6'
min.
6'
min.
6'
min.
6'
min.
6'
min.
6'
min.
6'
min.
6'
min.
6'
min.
6'
min.
5'
min.
Design C
PLAY STRUCTURE USE ZONES
3

Assembly safety
1. Wear safety glasses to protect your eyes from flying wood chips when drilling or cutting.
2. Verify that all bolts and screws are secured tightly and all acorn nuts are snug (acorn nuts should be
tightened to 5 foot pounds of torque).
3. DO NOT allow children to play on the play system until it is completely assembled in a proper location.
4. DO NOT allow children in the area while you are assembling your play system. Many of the Rainbow
Play Systems, Inc. components are very heavy and could seriously injure a child.
Rules for Safe Play
The quality of the supervision depends on the quality of the supervisor's knowledge of safe play behavior. Parents
and playground supervisors should be aware that not all playground equipment is appropriate for all children who
may use the playground. Supervisors should review posted signs indicating the appropriate age of the users and
direct children to equipment appropriate for their age. Play structures that are designed, installed, and maintained
in accordance to the standards and guidelines specified and referenced in this manual can still present hazards to
children in the absence of adequate supervision.
NOTE: This product is designed for children 2-12 years of age.
WARNING: Before allowing children to play on this equipment for the first time,
carefully review the rules for safe play with them. Observing the following
statements and warnings reduces the likelihood of a serious or fatal injury.
1. DO NOT EXCEED the specified maximum children and weight specifications for your play structure.
2. CLOSE ADULT SUPERVISION is required, especially for younger children.
3. WARN CHILDREN TO AVOID playing or walking in front of, behind, or between moving equipment and slides.
4. INSTRUCT CHILDREN NOT TO use any part of the play system in a manner other than what it is intended.
5. DRESS CHILDREN APPROPRIATELY. CHILDREN SHOULD NOT wear scarves, hats with straps, helmets,
jackets with draw strings, hooded jackets, poorly fitting shoes, or any other loose fitting clothing which could
become entangled or snagged on equipment.
6. INSTRUCT CHILDREN NOT TO play on the equipment if it is wet. Potentially slippery surfaces may cause a
hazard.
7. INSTRUCT CHILDREN NOT TO attach items to the play system not specifically intended for use with the play
equipment. Items such as, but not limited to, jump ropes, clotheslines, and pet leashes may pose a
strangulation hazard.
8. INSTRUCT CHILDREN TO REMOVE any bike or other sports helmets before playing on the play equipment,
as they may pose a possible hanging hazard. Children must be dressed appropriately.
9. VERIFY there are no gaps between the slide bed way and the slide screws.
10. INSTRUCT CHILDREN to always go down slides feet first. Never slide head first.
11. INSTRUCT CHILDREN TO NEVER climb, crawl, or walk on items not intended for such use. Such types of
play on top of Crawl Tunnels, Fort Roofs, and Tube Slides greatly increase the risk of a serious or fatal fall.
4

Rainbow Play Systems recommends owners and maintenance managers obtain the most recent copy of
the Handbook for Public Playground Safety published by the U.S. Consumer Product Safety Commission
(CPSC). The recommendations provided in this guidebook will help to ensure greater playground safety.
You may obtain a copy of this guidebook by visiting their website at www.cpsc.gov.
Inadequate and lack of maintenance on playground equipment can result in serious injury! Regular
inspection, maintenance and replacement of damaged parts is essential to the users' safety and the
longevity of the equipment. The safety of playground equipment is dependant on proper inspection and
maintenance. To ensure safety and suitability of the playground equipment, a comprehensive inspection
and maintenance program should be developed for your playground. Personnel should be thoroughly
trained to inspect playground equipment for potential hazards, paying special attention to heavily used
equipment and components which can be expected to wear. Any damaged or worn parts not suitable for
use should be repaired or replaced before children are allowed to use the playground equipment.
All maintenance inspections and repairs should be properly documented and retained.
The provided checklists are intended to address general maintenance concerns, they are not a
comprehensive maintenance and safety evaluation.
Maintenance of Your Play Structure
Maintenance Checklist
Daily

Remove all foreign objects (strings, ropes, bottles, cans, etc.) from the play structure and use
zone surrounding the play structure.
There are no user modifications to the equipment, such as strings and ropes tied to
equipment.
Rake loose-fill surfacing to maintain adequate depth of loose-fill surfacing and to keep loose-
fill surfacing from becoming compacted.
There are no broken or missing components rendering the equipment not suitable for use.
Weekly
There are no sharp points, corners or edges on the equipment.
There are no missing or damaged protective caps or plugs.
There are no hazardous protrusions or projections.
There are no potential clothing entanglement hazards such as protruding bolts.
There are no trip hazards, such as anchoring devices, rocks, roots, or any other obstacles in
the use zone.
There are no loose fastening devices or worn connections.
Monthly
Adequate protective surfacing under and around the equipment
-Add new surfacing as needed
There is no rust, rot, cracks, or splinters on any equipment (check carefully where it comes in
contact with the ground).
There are no damaged fences, benches, or signs on the playground.
All equipment is securely anchored.
There are no pinch, crush and shearing points or exposed moving parts.
The entire play area has satisfactory drainage, especially in heavy use areas such as under
swings and at slide exits.
Notes/Action Taken:
Date of Inspection: Inspection By:
5

Information Signage and Labels
*NOTE: The provided informational plaques should be installed on your play structure according to
installation instructions provided later in this manual.
*NOTE: Informational plaques must be replaced if they become worn and unable to be clearly read.
6

DETAIL A
UPRIGHT
PILOT
HOLES
FACIA
DETAIL B
USE FACIA AS
A GUIDE FOR
PRE-DRILLING
HOLES
FACES MUST
BE FLUSH
WARNING
Drilling, sawing, sanding or machining wood products generates wood dust,
a substance known to the State of California to cause cancer. Avoid inhaling
wood dust or use a dust mask or other safeguards for personal protection.
California Health and Safety Code Section 25249.6
Helpful Installation Hints
*NOTE: Refer to these assembly tips throughout the entire installation process.
1. After thoroughly reading all information and properly locating your play system site, carefully unpack
parts. As you unpack your play system, keep the parts list handy and become familiar with each part before
beginning assembly. Remember that a little extra time spent familiarizing yourself with the parts and
instructions before you begin will help avoid mistakes and save you time later.
2. Group both wood and non-wood parts together in accordance to each page, or Step, of this assembly
manual. Doing this now will help you quickly locate parts and assemble the set with ease.
3. Sort your hardware into groups of similar hardware pieces. Use a solid surface, such as a concrete driveway,
to ensure you do not lose any hardware.
4. Before starting each Step, thoroughly read all of the instructions to ensure all information is understood. Pay
special attention to the orientation of each part, details & notes, and proper usage of hardware. Each piece of
hardware is required for a certain part of the assembly.
5. Certain Steps of the assembly are best performed on a hard flat surface to ensure proper and accurate
assembly.
6. All Lag Bolts must have pre-drilled holes 2" deep (as shown in Detail A). Use a 1/8" drill bit for all 1/4" and
5/16" Lag Bolts and use a 1/4" drill bit for all 3/8" Lag Bolts. Lag Bolts can be difficult to put in knot holes.
Pre-drilling pilot holes will help to prevent the Lag Bolts from breaking.
7. All #14 Phillips Pan Head Tap Screws must have pre-drilled holes 1/2" deep. Use a 1/8" drill bit.
8. Use a clamp to secure Facias flush to the Uprights and use holes in facia as a guide for placing Lag Bolt Pilot
Holes (as shown in Detail B).
9. Verify Facias are flush with Uprights.
10. Check assembly periodically to ensure the set is level and all facias are square to the uprights.
11. If a gap occurs between boards when inserting Screws or Lag Bolts, back out hardware and apply pressure to
the top board while reinserting hardware in the same hole.
7

0
1
2
3
4
5
6
7
8
9
H1
H3
H4
H5
H14
H27
H28
H29
H18
H17
H24
H22
H34 H32
H10
H12 H11
H7
H20
H13
H8
H2
H9
Carpenters Square
Carpenters Level
7/16" Deep Well Socket
1/2" Deep Well Socket
9/16" Deep Well Socket
3/4" Deep Well Socket
8' Step Ladder
Safety Glasses
Utility Knife
Locking Pliers
Tape Measure
Claw Hammer
Wood Clamp
Standard or Cordless Drill
w/ #2 & #3 Phillips Bits
Electric Impact Gun or 1/4" & 3/8" Ratchet
1/8" Drill Bit
1/4" Drill Bit
9/16" Drill Bit
9/16" Drill Bit w/1 1/2" counter bore
Adult Helper
TOOLS REQUIRED FOR ASSEMBLY
8

0
1
2
3
4
5
6
7
8
9
H37
H44
H52
H71
H75
H50
H74
H72
*NOTE: Thread length may vary from what is pictured.
9

0
1
2
3
4
5
6
7
8
9
H93
H120
H95
H97
H119
H99
H104
H115
H116
H121
*NOTE: Thread length may vary from what is pictured.
10

0
1
2
3
4
5
6
7
8
9
H185 H171
H166
H164 H157
H155
H154
H132
H30
H174
*NOTE: Thread length may vary from what is pictured.
11

3901
4 @ 2 x 4 x 32" 2 HOLE FACIA (1-03-0901)
3894
3356
4 @ 2 x 4 x 25" COMMERCIAL RAIL TOP (1-03-0894)
1 @ 2 x 4 x 60 5/8" 3 HOLE FACIA (1-03-0930)
1 @ 2 x 4 x 29 1/4" FILLER BOARD (1-03-1019)
1 @ 2 x 4 x 8 5/8" FILLER BOARD (1-03-1020)
1 @ 2 x 4 x 15 3/8" FILLER BOARD (1-03-1021)
3930
3019
3020
3021
28 @ 2 x 6 x 32" 4 HOLE FACIA (1-04-0693)
4693
9 @ 2 x 4 x 25 1/4" COMMERCIAL FILLER (1-03-1356)
Commercial Design A Parts List
F/N# DESCRIPTION DIMENSION QTY FOUND IN
H1 Flat Washer 1/4" 78 5-46-0794
H3 Flat Washer 3/8" 201/2 5-46-0794/5-46-0239
H4 Flat Washer 1/2" 6 5-46-0794
H5 Flat Washer 3/4" 6 5-46-0794
H12 Lock Washer 1/2" 6 5-46-0794
H18 Standard Nut 1/2" 6 5-46-0794
H29 Acorn Nut 1/2" 6 5-46-0794
H71 Carriage Bolt 1/2" x 6 3/4" 6 5-46-0794
H93 Lag Bolt 1/4" x 2" 12 5-46-0794
H95 Lag Bolt 1/4" x 2 1/2" 2 5-46-0794
H97 Lag Bolt 1/4" x 3" 12/20 5-46-0794/5-46-0841
H99 Lag Bolt 1/4" x 4" 54 5-46-0794
H116 Lag Bolt 3/8" x 3 1/2" 201 5-46-0794
H119 Lag Bolt 3/8" x 5" 2 5-46-0239
H155 Phillips Wood Screw #8 x 2 1/2" 24 5-46-0794
H157 Phillips Pan Head Tap Screw #10 x 1" 16 5-46-0794
N73 Bolt Cup 22 5-21-1108
N29 3/8" Bolt Cup 10 5-21-1108
N265 Commercial Warning Plaque 1 5-21-1108
N266 Commercial Supervision Plaque 1 5-21-1108
N267 Commercial Surfacing Plaque 1 5-21-1108
N270 Rainbow Commercial Plaque 1 5-21-1108
N271 Metal Stake 6 5-21-1108
12

1 @ 2 x 6 x 25 1/4" ADA STEP FACIA (1-04-0846)
2 @ 2 x 6 x 44 1/8" ADA SUPPORT FACIA (1-04-0847)
1 @ 4 x 4 x 65" ADA TRANSFER HANDLE UPRIGHT (1-06-0739)
1 @ 4 x 4 x 22" ADA TRANSFER UPRIGHT (1-06-0787)
2 @ 4 x 4 x 82" COMMERCIAL GROUND RUNNER (1-06-0796)
5 @ 4 x 4 x 91 3/4" ML CENTER UPRIGHT (1-06-0798)
4 @ 4 x 4 x 114" ML CORNER UPRIGHT (1-06-0799)
2 @ 4 x 6 x 19 1/2" SLIDE BRACE (1-07-0089)
4 @ 4 x 6 x 22 1/2" SLIDE BRACE (1-07-0464)
1 @ 4 x 6 x 37" RIGHT SPIRAL LEG (1-07-0683)
1 @ 4 x 6 x 37" LEFT SPIRAL LEG (1-07-0684)
4 @ 6 x 6 x 23 1/2" SPIRAL SLIDE LEG (1-08-0147)
1 @ ADA STEP (1-20-0940)
4 @ COMMERCIAL RAIL (1-20-1191)
4846
4847
6739
6787
6796
6798
6799
7089
7464
7683
7684
8147
A940 A191
9 @ 2 x 6 x 60 5/8" 6 HOLE FACIA (1-04-0732)
1 @ 2 x 6 x 89 1/4" 8 HOLE FACIA (1-04-0811)
4811
4732
5 @ BGB DECK PANEL (1-20-1133)
2 @ 4 x 4 x 25" FILLER BLOCK
(1-06-0138)
6138
A133
Commercial Design A Parts List
13

3894
8 @ 2 x 4 x 25" COMMERCIAL RAIL TOP (1-03-0894)
1 @ 2 x 4 x 60 5/8" 3 HOLE FACIA (1-03-0930)
2 @ 2 x 4 x 29 1/4" FILLER BOARD (1-03-1019)
3930
3019
2 @ 2 x 6 x 32" 4 HOLE FACIA (1-04-0693)
4693
5 @ 2 x 4 x 25 1/4" COMMERCIAL FILLER (1-03-1356)
3356
3944
2 @ 2 x 4 x 117 7/8" 5 HOLE FACIA (1-03-0944)
3 @ 2 x 4 x 25" RAIL BOTTOM (1-03-1410)
3410
Commercial Pod B Parts List
F/N# DESCRIPTION DIMENSION QTY FOUND IN
H1 Flat Washer 1/4" 120 5-46-0795
H3 Flat Washer 3/8" 2/130 5-46-0239/5-46-0795
H4 Flat Washer 1/2" 24 5-46-0795
H5 Flat Washer 3/4" 20 5-46-0795
H11 Lock Washer 3/8" 4 5-46-0795
H12 Lock Washer 1/2" 20 5-46-0795
H17 Standard Nut 3/8" 4 5-46-0795
H18 Standard Nut 1/2" 20 5-46-0795
H28 Acorn Nut 3/8" 4 5-46-0795
H29 Acorn Nut 1/2" 20 5-46-0795
H52 Carriage Bolt 3/8" x 4 1/2" 4 5-46-0795
H71 Carriage Bolt 1/2" x 6 3/4" 19 5-46-0795
H74 Carriage Bolt 1/2" x 8 1/2" 1 5-46-0795
H93 Lag Bolt 1/4" x 2" 32 5-46-0795
H95 Lag Bolt 1/4" x 2 1/2" 4 5-46-0795
H97 Lag Bolt 1/4" x 3" 44/20 5-46-0795/5-46-0841
H99 Lag Bolt 1/4" x 4" 44 5-46-0795
H116 Lag Bolt 3/8" x 3 1/2" 120 5-46-0795
H119 Lag Bolt 3/8" x 5" 2/8 5-46-0239/5-46-0795
H121 Lag Bolt 3/8" x 7" 2 5-46-0795
H157 Phillips Pan Head Tap Screw #10 x 1" 16 5-46-0795
H164 Phillips Pan Head Tap Screw #14 x 1" 6 5-46-0795
H155 Phillips Wood Screw #8 x 2 1/2" 32 5-46-0795
N73 Bolt Cup 10 5-21-1109
N29 3/8" Bolt Cup 16 5-21-1109
N265 Commercial Warning Plaque 1 5-21-1109
N266 Commercial Supervision Plaque 1 5-21-1109
N267 Commercial Surfacing Plaque 1 5-21-1109
N270 Rainbow Commercial Plaque 1 5-21-1109
N8 90
Bracket 3 5-21-1109
N271 Metal Stake 8 5-21-1109
14

2 @ 4 x 4 x 82" COMMERCIAL GROUND RUNNER (1-06-0796)
6796
5 @ 2 x 6 x 60 5/8" 6 HOLE FACIA (1-04-0732)
4732
1 @ 4 x 4 x 25" FILLER BLOCK
(1-06-0138)
6138
2 @ 2 x 6 x 25" MONKEY BAR ENTRAPMENT BOARD (1-04-0696)
1 @ 2 x 6 x 60 5/8" 4 HOLE FACIA (1-04-0721)
1 @ 2 x 6 x 60 5/8" DECK RUNNER (1-04-0730)
2 @ 2 x 6 x 60 5/8" 8 HOLE DECK FACIA (1-04-0731)
4696
4721
4730
4731
6001
6002
2 @ 4 x 4 x 19" LEFT SLIM BRACKET
(1-06-0001)
3 @ 4 x 4 x 19" RIGHT SLIM BRACKET
(1-06-0002)
4843
4845
6788
6789
6790
6793
6675
6801
2 @ 2 x 6 x 117 7/8" 10 HOLE FACIA (1-04-0843)
1 @ 2 x 6 x 60 5/8" 8 HOLE FACIA (1-04-0845)
6 @ 4 x 4 x 45 3/4" BGB UPRIGHT (1-06-0788)
2 @ 4 x 4 x 53 15/16" 48" DH LL CENTER UPRIGHT (1-06-0789)
1 @ 4 x 4 x 55 1/8" 48" DH LL CENTER UPRIGHT (1-06-0790)
2 @ 4 x 4 x 36" FILLER BOARD (1-06-0793)
3 @ 4 x 4 x 39" CENTER POST (1-06-0675)
2 @ 4 x 4 x 43 1/16" SHORT CENTER POST (1-06-0801)
6797
2 @ 4 x 4 x 20" FILLER BLOCK (1-06-0797)
Commercial Pod B Parts List
15

2 @ 4 x 6 x 19 1/2" SLIDE BRACE (1-07-0089)
4 @ 4 x 6 x 22 1/2" SLIDE BRACE (1-07-0464)
1 @ 4 x 6 x 37" RIGHT SPIRAL LEG (1-07-0683)
1 @ 4 x 6 x 37" LEFT SPIRAL LEG (1-07-0684)
4 @ 6 x 6 x 23 1/2" SPIRAL SLIDE LEG (1-08-0147)
8 @ COMMERCIAL RAIL (1-20-1191)
7089
7464
7683
7684
8147
A191
4 @ BGB DECK PANEL (1-20-1133)
A133
6802
7144
7690
4 @ 4 x 4 x 124" 48" DH CORNER UPRIGHT (1-06-0802)
2 @ 4 x 6 x 117 7/8" BILLY GOAT BRIDGE MAIN BEAM
(1-07-0144)
2 @ 4 x 6 x 60 5/8" MAIN BEAM (1-07-0690)
2 @ DECK PANEL (1-20-1117)
A117
A427
1@ 25" CHALKBOARD RAIL (9-20-0427)
Commercial Pod B Parts List
25" Chalkboard Rail Parts List
16

3901
1 @ 2 x 4 x 32" 2 HOLE FACIA (1-03-0901)
3894
9 @ 2 x 4 x 25" COMMERCIAL RAIL TOP
(1-03-0894)
5 @ 2 x 6 x 32" 4 HOLE FACIA (1-04-0693)
4693
4 @ 2 x 4 x 25 1/4" COMMERCIAL FILLER (1-03-1356)
3356
3944
2 @ 2 x 4 x 117 7/8" 5 HOLE FACIA (1-03-0944)
3 @ 2 x 4 x 10" COMMERCIAL RAIL TOP
(1-03-0900)
1 @ 2 x 4 x 60 5/8" UNIVERSAL TARP BOARD
(1-03-0784)
3900
3784
1 @ 2 x 6 x 25" MONKEY BAR ENTRAPMENT
BOARD (1-04-0696)
1 @ 2 x 6 x 60 5/8" 4 HOLE FACIA (1-04-0721)
1 @ 2 x 6 x 60 5/8" DECK RUNNER (1-04-0730)
4696
4721
4730
Commercial Pod C Parts List
F/N# DESCRIPTION DIMENSION QTY FOUND IN
H1 Flat Washer 1/4" 123 5-46-0824
H3 Flat Washer 3/8" 143 5-46-0824
H4 Flat Washer 1/2" 22 5-46-0824
H5 Flat Washer 3/4" 20 5-46-0824
H11 Lock Washer 3/8" 4 5-46-0824
H12 Lock Washer 1/2" 20 5-46-0824
H17 Standard Nut 3/8" 2 5-46-0824
H18 Standard Nut 1/2" 20 5-46-0824
H28 Acorn Nut 3/8" 2 5-46-0824
H29 Acorn Nut 1/2" 20 5-46-0824
H30 Pallet Nut 3/8" 2 5-46-0824
H52 Carriage Bolt 3/8" x 4 1/2" 2 5-46-0824
H71 Carriage Bolt 1/2" x 6 3/4" 19 5-46-0824
H72 Carriage Bolt 1/2" x 7" 1 5-46-0824
H93 Lag Bolt 1/4" x 2" 36 5-46-0824
H97 Lag Bolt 1/4" x 3" 39 5-46-0824
H99 Lag Bolt 1/4" x 4" 48 5-46-0824
H116 Lag Bolt 3/8" x 3 1/2" 119 5-46-0824
H119 Lag Bolt 3/8" x 5" 20 5-46-0824
H132 Hex Head Bolt 3/8" x 5" 2 5-46-0824
H157 Phillips Pan Head Tap Screw #10 x 1" 16 5-46-0824
H164 Phillips Pan Head Tap Screw #14 x 1" 12 5-46-0824
H174 Phillips Truss Head Screw #12 x 1 1/2" 2 5-46-0824
H155 Phillips Wood Screw #8 x 2 1/2" 28 5-46-0824
N73 Bolt Cup 10 5-21-1110
N29 3/8" Bolt Cup 17 5-21-1110
N265 Commercial Warning Plaque 1 5-21-1110
N266 Commercial Supervision Plaque 1 5-21-1110
N267 Commercial Surfacing Plaque 1 5-21-1110
N270 Rainbow Commercial Plaque 1 5-21-1110
N82 Ladder Bracket 2 5-21-1110
N8 90 Bracket 6 5-21-1110
N271 Metal Stake 8 5-21-1110
17

2 @ 4 x 4 x 82" COMMERCIAL GROUND RUNNER (1-06-0796)
6796
3 @ 2 x 6 x 60 5/8" 6 HOLE FACIA (1-04-0732)
4732
2 @ 2 x 6 x 60 5/8" 8 HOLE DECK FACIA (1-04-0731)
4731
4843
4845
6788
6675
2 @ 2 x 6 x 117 7/8" 10 HOLE FACIA (1-04-0843)
1 @ 2 x 6 x 60 5/8" 8 HOLE FACIA (1-04-0845)
6 @ 4 x 4 x 45 3/4" BGB UPRIGHT (1-06-0788)
5 @ 4 x 4 x 39" COMMERCIAL OPENING
UPRIGHT (1-06-0675)
2 @ 4 x 4 x 20" FILLER BLOCK (1-06-0797)
6797
4844
6791
6792
6657
6804
6803
6794
1 @ 2 x 6 x 60 5/8" 8 HOLE FACIA (1-04-0844)
2 @ 4 x 4 x 65 15/16" 60" DH LL CENTER UPRIGHT (1-06-0791)
1 @ 4 x 4 x 67 1/8" 60" DH QT UPRIGHT (1-06-0792)
1 @ 4 x 4 x 53 3/4" FILLER BLOCK (1-06-0657)
1 @ 4 x 4 x 53 3/4" COMM SLIDE MOUNTING BLOCK
(1-06-0804)
1 @ 4 x 4 x 45 3/4" COMM BGB CENTER
UPRIGHT (1-06-0794)
4 @ 4 x 4 x 136" 60" DH CORNER UPRIGHT (1-06-0803)
7144
7690
7089 7464
2 @ 4 x 6 x 117 7/8" BILLY GOAT BRIDGE MAIN BEAM (1-07-0144)
2 @ 4 x 6 x 60 5/8" MAIN BEAM (1-07-0690)
2 @ 4 x 6 x 19 1/2" SLIDE BRACE
(1-07-0089)
4 @ 4 x 6 x 22 1/2" SLIDE BRACE
(1-07-0464)
Commercial Pod C Parts List
18

1 @ 4 x 6 x 37" RIGHT SPIRAL LEG (1-07-0683)
1 @ 4 x 6 x 37" LEFT SPIRAL LEG (1-07-0684)
4 @ 6 x 6 x 23 1/2" SPIRAL SLIDE LEG (1-08-0147)
10 @ COMMERCIAL RAIL (1-20-1191)
7683
7684
8147
A191
4 @ BGB DECK PANEL (1-20-1133)
A133
2 @ DECK PANEL (1-20-1117)
A117
1 @ 6 x 6 x 18" SLIDE BLOCK (1-08-0207)
2 @ COZY RAIL (1-20-0941)
A941
8207
A190
1 @ 68" DH 4x6 CLUBHOUSE ROCK WALL (1-20-1190)
Commercial Pod C Parts List
19