Rasha Cybrid Owner's manual

QUICK USER MANUAL
RASHA PROFESSIONAL A/S
Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
1
CYBRID

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
2
Edition Notes
The Cybrid, User Manual Rev. 1 covers the description,
safety precautions, installation, programming, operation,
and maintenance of the Cybrid. Rasha released this
edition of the Cybrid User Manual in Jan 2017.
Trademarks
Rasha®is a registered trademark of RASHA
PROFESSIONAL A/S. (d/b/a RASHA®or Rasha). The
RASHA® logo in its entirety including the RASHA®name
and the Globe wiht Rings, and all other trademarks in this
manual pertaining to services, products, or marketing
statements are owned or licensed by RASHA®. Any other
product names, logos, brands, company names, and other
trademarks featured or referred to within this document
are the property of their respective trademark holders.
Copyright
Notice
RASHA owns the content of this User Manual in its
entirety, including but not limited to pictures, logos,
trademarks, and resources. © Copyright 2017 RASHA. All
rights reserved. Electronically published by Rasha in the
United States of America.
Manual Use
Rasha authorizes its customers to download and print this
manual for professional information purposes only. Rasha
expressly prohibits the usage, copy, storage, distribution,
modication, or printing of this manual or its content for
any other purpose without written consent from Rasha.
Document
Printing
For better results, print this document in color, on letter
size paper (8.5 x 11 in), double-sided. If using A4 paper
(210 x 297 mm), congure your printer to scale the content
accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or
maintaining this product should completely read through
the guide that shipped with the product, as well as this
manual, before installing, operating, or maintaining this
product.
Document
Revision
The Cybrid User Manual Rev. 1 supersedes all previous
versions of this manual. Discard any older versions of
this manual and replace with this version. Go to www.
rashaprofessional.com for the latest version.
Author Date Editor Date
Alex G. 01/03/17

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
3
Table of Contents
1. Before You Begin................................. 4
What Is Included .................................. 4
Claims .................................................. 4
Manual Conventions ............................ 4
Symbols ............................................... 4
Safety Notes......................................... 5
Personal Safety.................................... 5
Rigging ................................................. 5
Power And Wiring................................. 5
2. Introduction.......................................... 6
Features ............................................... 6
Description ........................................... 6
Overview .............................................. 7
3. Setup..................................................... 8
AC Power ............................................. 8
AC Plug ................................................ 8
Fuse Replacement ............................... 8
Power Linking....................................... 8
DMX Linking......................................... 8
DMX Personalities................................ 8
Mounting .............................................. 9
Orientation............................................ 9
Rigging ................................................. 9
Procedure............................................ 9
4. Master-Slave ...................................... 10
Occupation of the XLR-connection .... 10
Building a serial master-slave chain... 10
4. Menu Map.......................................... 11
Display panel operating instructions .. 12
Operation ........................................... 12
Reset operating................................. 12
Run..................................................... 12
Manual control.................................... 12
Running conguration ........................ 12
Display conguration.......................... 14
Advanced ........................................... 14
5. Dmx protocal...................................... 16
5. Maintenance....................................... 19
Maintenance ..................................... 19
Cleaning lamp................................... 19
Operating determinations ................. 19
6. Technical specications ................... 20
Returns ............................................. 21
Contact us......................................... 22
`

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
4
What Is
Included
• Rasha Cybrid
• Powercon Cable
• DMX Cable
• Mounting Brackets
• Quick reference guide
Claims
Carefully unpack the product immediately and check the
box to make sure all the parts are in the package are in
good condition. If the box or the contents (the product and
included accessories) appear damaged from shipping or
show signs of mishandling, notify the carrier immediately,
not Rasha. Failure to report damage to the carrier
immediately may Void your claim. In addition, keep the
box and contents for inspection.
For other issues, such as missing components or parts,
damage not related to shipping, or concealed damage, le
a claim with Rasha within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512 DMX value range in number
50/60 A set of mutually exclusive values in the text
<SET> A button on the product’s control panel
Settings A product function or a menu option
0-512 A sequence of menu options
1-10 A range of menu values from which to choose in a menu
Yes/No A set of two mutually exclusive menu options in a menu
ON A unique value to be entered or selected in a menu
Symbols
Symbols Meaning
The term “DMX” used throughout this manual refers to the DMX512 digital
data transmission protocol

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
5
Safety Notes
This device has left our premises in absolutely perfect condition. In order
to maintain this condition and to ensure a safe operation, it is absolutely
necessary for the user to follow the safety instructions and warning notes
written in this user manual.
Important: Damages caused by the disregard of this user manual are
not subject to warranty. The dealer will not accept liability for any
resulting defects or problems.
Always plug in the power unit last.
Keep away from heaters and other heating sources! Keep away children
and amateurs from the device! Never leave the device running unattended!
If the device has been exposed to drastic temperature uctuation (e. g. after
transportation), do not switch it on immediately. The arising condensation
water might damage your device. Leave the device switched o󰀨 until it has
reached room temperature.
This device falls under protection-class III. It always has to be operated
with an appropriate transformer. Check the device, the power cord and
transformer from time to time. Make sure that the transformer is the correct
type as that stated on the rear panel.
Always disconnect from the main power when the device is not in use or
before cleaning it.
There are no serviceable parts inside the device. Maintenance and service
operations are only to be carried out by authorized dealers.
Please note that damages caused by manual modications on the device
or unauthorized operation by unqualied persons are not subject to
warranty.
Personal
Safety
Avoid direct eye exposure to the light source while the product is on. Always
disconnect this product from its power source before servicing. Always
connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing during operation because it may be
very hot.
Rigging
This device can be installed directly onto a truss with the quicklock
(included) system and triggerclamp (not included), wall or stage oor in
any orientation without altering its operation characteristics.
Use proper bolts to mount the device via its brackets. The brackets should
be attached to the device with proper bolts!
Always use a secondary safety rope that can hold at least 10 times the
weight of the device.
The minimum distance between the device and illuminated surface is 1
meter. There should not be any ammable materials 10 meters around
the device!
Power And
Wiring
Always make sure you are connecting this product to the proper voltage
in accordance with the specications in this manual or on the product’s
specication label. Never connect this product to a dimmer pack or
rheostat. Never disconnect this product by pulling or tugging on the power
cable.
The term “DMX” used throughout this manual refers to the DMX512 digital data
transmission protocol

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
6
Features • 8-Color’s + White; Rotation with variable direction and speed
• Master/slave wirelessly linkable 2.4 GHz with other xtures for a
coordinated light show
• Create coordinated light shows by linking other xtures in master/slave
mode
• 8 Facet prism, 6-In line bi-directionally rotable at variable speeds & Frost
Filter
• High speed strobe e󰀨ect with 1-25 ashers per second
• 8 gobos wheel and shake
• 7 Rotating gobo wheel
• Enhance light shows with adjustable electronic strobe and dimmer
e󰀨ects
• Custom color customization function
Description
The Cybrid, is our newest 180W LED Beam with cool and fun features.
Dual Prism with an amazing water e󰀨ect. One 6-in line prism which create
a fun 3D e󰀨ect and a second 8-facet prism that multiplies a crisp and clear
projection. The Cybrid LED beam project a strong beam and a wide variety
of e󰀨ects.
INTRODUCTION
Use on Dimmer Auto Programs
Outdoor Use Auto-Ranging Power Supply
Sound-Activated Replaceable Fuse
DMX User-Serviceable
Master/Slave

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
7
OVERVIEW

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
8
SETUP
Power Supply
Each Cybrid has an auto-ranging power supply that works with an input
voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power
requirements for each Cybrid refer to the label a󰀩xed to the product.
You can also refer to the Technical Specications chart in this manual.
The listed current rating indicates the maximum current draw during
normal operation. For more information, you may download Sizing Circuit
Breakers from the Rasha website: www.rashaprofessional.com

Always connect this product to a protected circuit with an appropriate
electrical ground to avoid the risk of electrocution or re. To eliminate
unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by
unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer
circuit, even if the rheostat or dimmer channel serves only as a 0 to 100%
switch.
AC Plug
The Cybrid comes with a power input cord terminated with a connector
on one end and an Edison plug on the other end (U.S. market). If the
power input cord that came with your product has no plug, or if you need to
change the Edison plug, use the table below to wire the new plug.
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a at-head screwdriver, lift the fuse holder cap from the housing.
3. Remove the blown fuse and replace with a another fuse of the same
type and rating (T 5 A).
4. press the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a
blown fuse. Always replace the blown fuse with another of the same type
and rating
Power Linking
You can link 9 Fixtures @ 110V.
DMX
Personalities
• The Cybrid uses a 3-pin DMX data connection for the 16CH DMX
personalities.
• Refer to the Introduction chapter for a brief description of each DMX
personality.
• Refer to the Operation chapter to learn how to congure the Cybrid to
work in these personalities.
• The DMX Values section provides you with detailed information regarding
the DMX personalities
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
If you are not familiar with or need more information about DMX standards, Master/Slave connectivity,
or the DMX cables needed to link this product to a DMX controller, download the DMX Handbook from
the Rasha website: www.rashaprofessional.com

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
9
Before mounting this product, read and follow the Safety Notes. For our
Rasha®Professional line of mounting clamps, go to
http://rashaprofessional.com/en/accesories
Orientation Always mount this product in a safe position and make sure there is
adequate room for ventilation, conguration, and maintenance
Rigging
• triggerclamp (not included), wall or stage oor in any orientation without
altering its operation characteristics.
• The brackets should be attached to the device with proper bolts!
• Always use a secondary safety rope that can
hold at least 10 times the weight of the device.
• The minimum distance between the device and illuminated surface is 1
meter. There should not be any ammable materials 10 meters around
the device
Procedures
The Cybrid comes with a preinstalled mounting surface to which you will be
able to attach most of our clamps found at www.rashaprofessional.com/en/
accesories. Make sure the clamps are capable of supporting the weight of
this product. Use at least 1 mounting point per product. In addition, use a
safety cable to link the product to the structure.
MOUNTING
Make sure there is no ammable material nearby during the istallation.
Follow. Follow the instructions Stated in this manual, and on the bottom
of the base device.
Use 2 Clamps to rigg the xtuer onto a truss. Make sure it is xed properly
and enssure the truss or your mounting rigg is secure!

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
10
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller
with the xture or one xture with another.
BUILDING A SERIAL MASTER-SLAVE / DMX-CHAIN
For Master-slave connection, you need to set a device as the Master device. All other devices will be the
slave devices.
Connect the DMX-output of the rst device (Master) in the chain with the DMX-input of the second
device (the rst slave device). Connect the DMX-output of the second device (the rst slave device) with
the DMX-input of the third device (the second slave device). Always connect one output with the input of
the next device until all devices are connected.
Caution: At the last xture, the DMX-cable has to be terminated with a terminator. Solder a 120Ω resistor
between Signal (-) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last xture.
BUILDING A SERIAL MASTER-SLAVE / DMX-CHAIN:
For Master-slave connection, you need to set a device as the Master device. All other devices will be the
slave devices.
Connect the DMX-output of the rst device (Master) in the chain with the DMX-input of the second
device (the rst slave device). Connect the DMX-output of the second device (the rst slave device) with
the DMX-input of the third device (the second slave device). Always connect one output with the input of
the next device until all devices are connected.
Caution: At the last xture, the DMX-cable has to be terminated with a terminator. Solder a 120Ω resistor
between Signal (-) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last xture.
MASTER-SLAVE

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
11
MENU MAP
MENU
SETTINGS
TEST
Hardware
Advance
SysInfo
O󰀨set
Run Mode
Input Password
Dimmer
FocusHall
LanguageSwitch
Version
Address
Strobe
GoboHall
ScreenRot
TotalHours
Channel
Pan
Gobo2Hall
HoursClear
OnHours
Sens
PanTilt
PrismFrostHall
TopTemp
Temperature
PanFine
PanCodeWheel
Tilt
PanSteps
Gobo
TiltSteps
Gobo2
ColourHall
TiltHall
Gobo2Rotation
Focus
PrismFrost
Macro
Reset
PrismRotation
PanTiltTime
TiltCodeWheel
InvertPan
InvertTilt
SwapPanTilt
CodeWheel
SigTimeout
ScreenSaver
ColourSmooth
LoadFactorySet
DMX
0-9
Rand
Exit
Auto4
Ok
Auto3
Auto2
Auto1
Sound
001-512
16CH
000-255
Sure?
000-255
Sure?
000-255
Sure?
000-255
000-120
Value
Value
Value
Value
Value
Value
Value
Value
Value
Value
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
Sure?
000-255
000-255
001-099
No
No
No
No
Keep
On
On
Yes
Yes
Yes
Yes
Clear
O󰀨
O󰀨
Sure to Load
Factory Set?

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
12
1. DISPLAY PANEL OPERATING INSTRUCTIONS:
Touch where portions of the menu description
Lamps using TFT 2.8 inch touch screen
The main panel as shown in the following gure:
2. OPERATION
2.1. DMX Addr: Use the menu to set desired xture address setting
2.2. Channel Mode: Use the menu to select desired DMX channel mode. The numbers
on the menu represents the number of control channels.
3. RESET OPERATING: RESET MOTORS
3.1. Reset All: Use the menu to reset all motors
3.2. Pan/Tilt: Use the menu to reset Pan and Tilt
3.3. Color: Use the menu to reset color
3.4. Gobo: Use the menu to reset gobos
3.5. Dim: Use the menu to reset dimmer
3.6. Focus/Prism etc.: Use the menu to reset focus, prism and frost. The 6 facet prism
will reset automatically if it is inactive (The reset process takes 6 seconds)
4 . RUN: USE THE MENU TO SELECT OPERATION MODE
Following is the instructions of the menu options:
4.1. DMX: Controlled by DMX512 signal.
4. 2. Test: Controlled by built-in program.
4. 3. Sound: Controlled by the volume of the ambient sound
Note*: Use the menu [Running Cnfg]-[Music Ctrl Cnfg] to set up the running mode and
microphone sensitivity.
5. MANUAL CONTROL:
Set DMX value manually
5.1. Pan: Set the DMX value of Pan.
...
5.2. Auto return: Return to previous menu automatically if no any operation. Use the
menu to select waiting times.
6. RUNNING CONFIGURATION:
Set the conguration of Running.

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
13
6.1. Tilt Conguration:
Reverse: The item allows to invert Tilt movement
Origin: Set desired Origin value to change Tilt movement range.
(set the DMX value to 0 before changing this value, the tile motor will move when
changing this value)
End: Set desired nal stop value to change Tilt movement range (set the DMX
value to 255 before changing this value, the tile motor will move when
changing this value)
6.2. Pan Conguration:
Reverse: The item allows to invert Pan Movement
Origin: Set desired Origin value to change Pan Movement range
(set the DMX value to 0 before changing this value, the tile motor will move when
changing this value)
End: Set desired nal stop value to change Pan movement range (set the DMX
value to 255 before changing this value, the tile motor will move when
changing this value)
6. 3. Sound Ctrl Conuguratuon
Sound Ctrl Mode: Use the menu to set desired sound control e󰀨ect
DMX: Control by DMX signal. In this control mode, the shutter or dimmer
channel must be operated by the DMX signal.
Auto: Random running.
6.4. Black Out:
Shutter Turn O󰀨
6.5. Time/Speed Mode:
Pan/Tilt: Use the menu to set the mode of pan/tilt movement
Speed: Both Pan and tilt will move with the same speed as adjusted at
the channel “Pan/Tilt speed, Pan/Tilt time”
Time: The Pan and Tilt will move with di󰀨erent speeds and they will come
at the same time to the end point of their tracks (pan and tilt use
their optimal speeds)
Rotating Gobo: Use the menu to set the mode of rotate gobo movement
Speed: Rotating gobo will move in speed mode.
Time: Rotating gobo will move in time mode.

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
14
6.6. Random Strobe Sync:
This menu sets if synchronization between every device when strobe in random mode.
7. DISPLAY CONFIGURATION:
7.1 LCD display conguration
Sleep: Use the menu to select waiting times before sleep.
Brightness: Use the menu to select desired brightness
Reverse: Use the menu to set Inverted orientation if the xture is
hanging on the truss
Indicator: Use the menu to set lighting of indicators.
Auto: Sleep When screen sleep.
KeepOn: Lighting forever
8. ADVANCED:
8.1. Factory Settings: Used in factory only! It requires the password to enter.
Test: Controlled by built-in program.
Sound: Controlled by the volume of the ambient sound. Use the menu
[Running Cnfg]-[Sound Ctrl Cnfg] to set up the running mode and
microphone sensitivity.
8.2. Language: Use the menu to select desired system language.
8.3. Err State: Error information (If there is any error shown in this menu, a
exclamatory mark will show at the top left corner of menu cover)
8.4. Sensor Err: The states of all of the sensors
Pan Raster: Is the position sensor (raster) error.
Tilt Raster: Is the position sensor (raster) error.
Pan Reset: Is the original position sensor error.
Tilt Reset: Is the original position sensor error.
Color wheel: Is the original position sensor error.
Sta.gobo: Is the original position sensor error.
RotGoboWheel: Is the original position sensor error.
Rot.gobo: Is the original position sensor error.
Focus: Is the original position sensor error.
Prism: Is the original position sensor error.
8.5. RAM Err: A memory allocation failure occurs. Please contact your Dealer
or Fabricator for repair assistance.

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
15
8.6. Product Code: This message informs you the product code of the rmware. It
provide a reference in maintenance only and the user can ignore them
usually.
8.7. Test Mode: This menu is operated in factory only, the user may ignore it.

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
16
DMX512 Protocol

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
17

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
18

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
19
MAINTENANCE:
When overheating protection device will automatically cut o󰀨 power supply, please check the fan is normal
operation.
CLEANING LAMP:
Cooling fans should be clean every 15 days. Internal and external optical lens, mirror and coating colour
lter clean must periodically, in order to optimize the e󰀩cacy output. Do not use any chemical solvents
containing clean colour lter coating.
Depending on the operation of the lamps cleaning frequency and the surrounding environment clean the
outside with a soft cloth and general glass cleaning products every 20 days, clean the internal optical
system at least every 30/60 day.
Do not use the organic solvent such as alcohol wipe on the lamps shell, this will cause damages.
OPERATING DETERMINATIONS
This device is an Moving light xture for color and lightbeams decoration on stages etc. It is allowed to be
operated with an AC of 100-240V, 50/60 Hz and is designed for indoor use only.
Do not shake the device. Avoid brute force when installing or operating.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around as this could endanger your own and the
safety of others!
Operate the device only after you have familiarized yourself with its functions. Do not permit any operation
by any person not qualied for operating this device. Most damages are the result of unprofessional
operation!
Please use the original packaging or approved Rasha Roadcases if the device is to be transported.
Unauthorized modications on the device are forbidden due to safety reasons! If this device will be operated
in any way di󰀨erent to the one described in this manual, it may su󰀨er damages and your warranty will
become void. Furthermore, any unauthorized operation or maintinance may lead to unexpected hazards
like short-circuit, burns, electric shock, etc.

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
20
CYBRID
PHYSICAL
Weight 27.4LBS
Dimensions 13.75in x 9in x 18.5in
LAMP
Type 180W LED light Engine
CRI (Color rendering index) >75
Average lifetime 50,000 Hours ( to>70% Lumen
Output)*
Ballast Electronic
*Manufacturer’s Figure Obtained Under Manufacturer’s Test
Conditions.
DYNAMIC EFFECTS
Color mixing Independently variable full & half color 0-255
Color wheel 8-Colors +White; Rotation with variable
direction and speed
Static gobo wheel 8- Gobo wheel and Shake
Rotating Gobo 7 Rotating Gobo Wheel
Prism 6 in-line bi-directional &
8-facet rotation prism
Mechanical dimmer 0 - 100%
Shutter Strobe effect 0.5-14HZ Hz, pulse effects,
instant open and blackout
Focus 5-25°
Pan/Tilt 540°/246°
CONTROL AND PROGRAMMING
DMX channels 16 Channel
Setting and addressing Control panel with LCD displa
16-bit control Color wheel, rotating gobos,
focus, zoom, pan & tilt
Setting & Addressing LED screen with Menu Button
Protocol DMX 512 | USITT DMX512
Firmware update Serial upload via DMX link
CONSTRUCTION
Color(s) Black | White
Housing UV-resistant fiber-reinforced composite
|Thermoplastic
Reflector High Profile optical lense
Protection rating IP 20
INSTALLATION
Mounting points Omega clamp brackets with 1/4-turn
fasteners
Location Indoor use only,
Orientation Any
ELECTRICAL
AC power AC90-240V,50/60 Hz
Power In-Port PowerCon Female (Blue)Type-A
PowerCon Out-Port PowerCon Female (White) Type-A
AC Power Throughput 180W
APPROVALS
EU safety/EU EMC EN 60598-2-17/EN 55015, EN
55103-1, EN 61547
US safety/US EMC 1573/ FCC Part 15 Class A
INCLUDED ITEMS
Cybrid 180W LED Beam P/N 870350
Two Omega clamp brackets P/N 890505
Power input cable 3ft P/N 890506
DMX input cable 3ft P/N 890506
ACCESSORIES (SOLD SEPARATELY)
Optional color wheel P/N 880228
Optional rotating gobo wheel P/N 880229
Optional fixed gobo wheel P/N 880230
Wireless DMX transmitter P/N 920101
G-clamp P/N 890107
Half-coupler clamp P/N 890108
Quick trigger clamp P/N 890109
Safety wire P/N 890110
Road Case 2 in 1 P/N 901108 | P/N 901109
ORDERING INFORMATION
Cybrid , Natural Packing box P/N816350
Cybrid, Road case P/N 816352