Rastar Baby F12 Berlinetta User manual

81900
01
02
03
04
06
07
07
08
08
10
11
11
12
13
01
It is very important to read this instruction carefully before usage.This
instruction not only specifys assembly process and proper application
method, but also help you to avoid injury or damaging the product in
case of incorrect operation.
This product can be operated in Battery operated/Radio control mode,
together with forward, reverse, left, right, and equipped with functions
like headlight, built-in music playing and MP3 input.
NO. Style
Radio control with painting Both Radio control and
Battery operated
Remark
CONTENTS
ABOUT “RASTAR BABY” PRODUCT
Thank you for purchasing our products. We have devoted ourselves to creating
comfortable and safe electronic remote control toys, and creating a colorful
childhood for your children.
ABOUT “RASTAR BABY” PRODUCT
SPECIFICATION
PARTS
ASSEMBLY
REPLACE BATTERY OF TRANSMITTER AND STEERING WHEEL
NORMAL OPERATION
STORAGE BATTERY MAINTENANCE
OVERCURRENT PROTECTOR
OPERATING FUNCTION
WARNING
CARE AND MAINTENANCE
MALFUNCTION SHOOTING GUIDE
RIDE-ON ELETRICAL ILLUSTRATION
MAINTENANCE
XINGHUI BABY SUPPLIES CO., LTD. reserves the right of the final
explanation to all the pictures and descriptions contained in this manual.
The manual is subject to change without separate notice. Please contact
your local distributor or directly consult us if you have any questions.

NO. Desc. Qty
1
02
1
2 1
3 1
4 3
55
16
17
18
19
110
1
12
11
1
13 1
14 2
15 1
16 1
17 9
18 8
19 5
1
20 4
21
22
4
SPECIFICATION
Size
For child
Max.weight loaded
Net Weight
Power
Speed
Battery
Power supply
Charging period
Rechargeable times
For temperature
Power of Motor
(111.5x57.2x46)cm
37months old - 96months old
25kg
11.3kg
Rechargeable
D1 (2-3)km/h D2 (3-4)km/h
6V 7Ah lead-acid / 6V 4.5Ah lead-acid
Input:AC220V 50Hz Output:DC6V 500mA
Charged for (10-15)h/time Run for (1-1.5)h
More than 300
5-35 Celsius degree
DC6V 25W
Please read carefully before assembly.
PARTS
Steering
Wheel
Windshield
Seat
Screw
Protector
Battery
Locker
Battery
Cover
Screw Pin
Hexnut
Charger
Storage
Battery
Transmitter
Lubricant
Key
MP3 Input line
Car Body
Gasket
Clip
Wheel
Rim Cover
Instruction
Wheel Core
NO. Desc. Qty

03
22
123
1211
6
10
16
4
5
9
14 15 17
18
19
13
8
7
If the quantity and shape of some spare parts in this manual are different
from that of products you buy, it might be because some parts of the car
you buy already have been installed or because we reduce setup steps
and quantities of spare parts for making the installing easier. Please
check and review.
The serial number of all spare parts showed as “(NO.) ” in the following descriptions.
21
20

Put the storage battery into the
battery compartment. Plug the
interface to the jack,connect the
red terminal and the black terminal
respectively to the anode
andcathode of battery. (Notice:
make sure they are correctly
connected, red to red,black to
black, otherwise, it will cause
short-circuit.)
Install the battery locker(7) to the
designated position, and fix it with
2 screws(4)
Install the battery cover(8) to the
designated position, and fix it with
2 screws(4)
Replace or take out the storage
battery and power.
Loosen the 2 screws(4) on battery
cover(8)
Unplug the interface and jack,
loosen the 2 screws(4) on battery
locker(7), then the storage battery
can be taken out.
ASSEMBLY
04
2
3
8
4
7
1
2
Put the seat (3) to the designated
position, fix the front buckles of
seat to the grooves of car body.
Press down the button behind the
seat and lay down the seat, then
release the button and the seat
will be locked. To unlock the seat,
press down the button and raise
the seat.
Notice: This seat is equipped with
s e a t b e l t , w h i c h i s o n l y a
decoration to develop the safety
sense of children, it can not
provide any substantial protection.
2.Install seat
3
1.Install battery and power
supply
Jack
Groove Groove
Front buckle
Interface

Remove the protector (5) at the upside
of the axes, which is non-functional but
only for protecting use during the
transportation. Please dispose
properly.
Please install the steering wheel (1) to
the specific place and use Screw (9)
and Hexnut (10) to screw it tightly after
you make sure the steering wheel is in
the right place. Please see picture 4.
05
3.Install steering wheel
5.Assembly completed
5
4.Install windshield and wing
mirror
2
6
4
1
10
9
Install windshield(2) to the designated
position, See picture 6.
Push the buckles of windshield to fix
the windshield.
Note: firstly you can install one end of
the headrest, then install the other end.
Picture 7 is schematic diagram of assembly,
disassemblyand maintenance. Please pay
attention to the sequence of spare parts
install and take good care of them after
disassembly.
6.Schematic diagram of
assembly and disassembly

Replace battery of transmitter and steering wheel
7
06
21
20
20
19
21
19
18
18
17
17
17
18
18
17
20
21
19
17 18
17
21
20
19 18
18
17
17
Press the ends
of clip, then install
the clip to the locking
point of rear axle.
Coat the inner bore of
wheel core(17) with
the lubricant(13).
BATTERY
SCREW
ON-OFF
SWITCH
1.Replace battery of transmitter
Put the antenna into the controller socket.
Open the lid and put the 9V battery according
to its polarity,then close the lid.
2.Replacebatteryof steeringwheel
Please take down the battery cover according
to the indicating arrow in the picture.
Properly put two “AA” batteries intosteering
wheel and then cover it.
3.Notice while replacing battery
Non-rechargeable batteries are not
to be recharged.
Rechargeable batteriesareto be removed
from the toy before being charged.
Different types of batteries or new and
used batteries are not to be mixed.
Exhaustedbatteriesaretobe removedfrom
thetoy.
Only batteries of the same or equivalent
type as recommended are to be used.
Batteries replaced by children should
be underadults’supervision.Pleasedonot
swap the batteries’ poles over.Short circuit
8
9
should not occur to the electrical source.
Please take out batteries in case of leakage
and corrosion if long term storage.
Pleasetakeoutbatterieswhenitispoweroff.
The controller should be operated by adults
or should be supervised by adults if played
by children.
BATTERY
9V
6F22

NORMAL OPERATION
STORAGE BATTERY MAINTENANCE
07
11
10
Indicator
Charging socket
Charging socket is under the filler cap. Open the filler cap and injksert the
plug of charger, then connect the charger with power.
Every one hour’ s running needs 10 to 15 hours’ charging. Every single
charging can not over 24 hours.
Both charger and storage batteries will occur mildly warm during charging.
Do not use mal-functioned adapter or storage battery unless they are
repaired.
This manual has to be kept since it contains important information.
Charger and storage batteries are not considered as toys.
Please make periodical inspection for storage battery, especially for adapter
wires and plugs.
Please turn off the switch when the ride-on is not in use. Please make full
charging after long-term suspended.
ONLY use the charger (6V 500mA) supplied by Rastar or Rastar Baby.
Please charge 10 to 15 hours before first time use.
Please use the suitable adapter to charge storage battery, otherwise
the ride-on will be damaged.
Please charge the car once the speed is slower than normal,
otherwise it will derease storage battery life.
Please fully charge the battery before you put your ride-on away,
and remember to recharge the battery every 30 days. This will
ensure the normal use of the battery, otherwise, the battery can
not be charged.
For safety, please ONLY use the battery supplied by Rastar or
Rastar Baby, whichhas been protected with polarity anti-reverse
structure.

OVERCURRENT PROTECTOR
OPERATING FUNCTION
12
13
1.Transmitter
2.Steering wheel
9
08
11
Self-recovery
fuze
Blown
fuze
Overcurrent protector is installed
under the seat.
Rear motor is equipped with self-recovery
fuze.Once overloading or improper
operation happens, the fuze will
automatically cut off the power.
Please turn the key off and wait for
30 seconds, then the fuze will
recover automatically.
Power device is equipped with blown
fuze. When short-circuit happens, the
fuze will be blown. Therefore, after
solve the circuit problem, you need
to replace the blown fuze.
Transmitter
Antenna
Forward
Reverse
Left
Right
Switch
Horn
Transmitting signal can cover about
20-30meters across. If transmitter
does not perform properly within
this coverage, please check its
battery.
Remark: in order to protect the
motor, the power of left/right button
on the transmitter will be cut off if
you press left/right button for over 2
seconds. Therefore, a continuous
turning will require you to press
left/right button repeatedly.
Switch: switch of controlling horn
Horn: Horn sound can be activated
when press.
CAUTION!
RISK OF FIRE. Do not
bypass. Replace only with
250V 20A.

09
Insert the key into the key hole, then turn the key until you hear a click sound.
Forward at high speed: put the Gear Switch in D2 gear and step on pedal
switch, the ride-on will move forward at high speed.
Forward at low speed: put the Gear Switch in D1 gear and step on pedal switch,
the ride-on will move forward at low speed.
Stop: put the Gear Switch in STOP gear, the ride-on will stop moving.
Reverse: put the Gear Switch in R gear and step on pedal switch, the ride-on
will move backward.
Left: steer left the steering wheel when ride-on is moving forward.
Right: steer right the steering wheel when ride-on is moving forward.
Ride-on Function
Spare switch is under the instrument. It has the same function as the key switch.
Switch up for power off, and down for power on. The ride-on is operated when
either the key switch or the spare switch is turned on. Only when both of the
switches are turned off, the ride-on will be shut down.
Radio control /Battery operated Mode Switch
The pedal switch, gear shift will be inactive when you switch to Remote Control
Mode. To avoid switching forward and back when frighten children, remote
operation with a slow start.
Headlight Switch
left turn
signal
Radio control /
Battery operated
Mode Switch
Volume Switch
Accelerator/
Play built-in
Music
MP3 socket (inside
the MP3 holder)
Pedal Switch Key Hole
Gear Shift
14
Spare Switch
is under the
dash board
right turn
signal
NOTICE!
When not playing MP3, please pull the MP3 Input Wire out of MP3
socket. Otherwise, all other sound effect will be mute.

CAUTION!
WARNING
9
10
Please read carefully since it contains important information.
Children are not allowed to operate charging. It should be operated by adult.
Ride-on operation should be under adults’ supervision.
This product should be assembled by adult; or checked by adult to make sure
proper assembly.
It is prohibited to run this ride-on in public streets, roads, slope, near
swimming pool, or any other dangerous area.
This ride-on can not be overloaded. The maximum loading capacity is 25
kilograms.
This ride-on is for children age between 3 to 8 years.
Some accessories of ride-on may be damaged by improper operation.
Do not suddenly use forward-reverse switch during running. It can only be used
when the ride-on is stopped.
Swab ride-on with cloth. Do not flush the ride-on with water in case damage.
Charger is not considered as toy. Please put it away after charging.
This product is made of plastics. Please keep it away from fire.
Re-start of the motor may occur sparkles. It is prohibited to run in flammable
and explosive area such as gas station.
Do not let children touch wheels in case being trapped or crushed. Please keep
other children away from the ride-on during running.
Flat ground is good for ride-on running. Please avoid running on sand or any
other rough ground.
The package of ride-on is not toy for children.
Adults are required to read this instruction carefully and give correct guideline
to children before playing.
This seat belt is only a decoration to develop the safety sense of children, it
can not provide any substantial protection.
Please guide children how to start and relax the pedal, how to handle
malfunctions and how to stop ride-on.
Do not use the malfunctioning ride-on until it is well repaired.
You may find battery damage, liquid leakage and other dangerous
phenomenon during replacement. Please pay attention to the following:
One 9V battery is needed for this ride-on.
Battery replacement should be operated by adults.
Install batteries correctly according to their polarity .
Storage battery can be removed from the ride-on and recharged, but can NOT
be heated or disposed of in fire.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries

11
can be recharged under adults’ supervision; Rechargeable batteries are to be
taken out from ride-on during charging.
When batteries are short of power, the remote control distance will be shorten.
Please replace with new batteries.
Take out batteries if ride-on is not in use for an extended preriod in case liquid
leakage. Remove batteries when they are used up.
Supply terminals are not to be short-circuit.
This ride-on is not for children under 36 months since it may have small parts
that can detach during running.
Transmitter can only be operated by adults or under adults’ supervision.
MALFUNCTION SHOOTING GUIDE
CARE AND MAINTENANCE
Car is not running
Malfunction Analysis Solution
Storage battery connectors
are not well connected
Gear shift is in the wrong
place
Car is over-loaded
Main body circuit is
damaged
Storage battery power is
low
Ground is uneven
Battery connectors are not
well connected
Charger is not charged with
electricity
Charger is broken
Reconnect
Gear shift should be in the
forward or backward
position
Reduce loaded weight to
under 25KGS
Please ask after-sale
service for help
Fully charge battery
Choose an even place
Reconnect
Reconnect
Replace charger
Car runs in
low speed
Battery cannot
be charged
Please do not play until it is fixed perfectly if there is any damaged.
Please check and maintain the car in regular time for keeping your child safe.
Please periodically check and make sure there are no screws loosening and
spare parts damaged.
Before installing and using the car, please check all spare parts carefully.
For avoiding unnecessary damages，please read this instruction in detail
before assembly and disassembly.

12
RIDE-ON ELETRICAL ILLUSTRATION
(Transmitter-operted / Pedal-operated )
Remark: Specification may vary from this eletrical illustration.
+ -
R1
Transmitting Antenna
R3
R2
Receiving
Antenna
Transmitter
4CH Receiving Board
Self-recovery
Fuze
Front Gear Box Rear Gear Box
Horn
Pedal-operated
Switch
Power
Switch
Transmitter/
Pedal Covert
Switch
MP3 Socket
Power
Indicator
Volumn
Switch
Amplifier
Board
Steering Wheel
Headlight
Left Horn Right Music
Headlight
Switch
Charging
Plug
Charging
Board
Battery Locker
Fuze
Storage
Battery
Forward/Reverse/Stop
Car cannot stop Car is damaged Please ask after-sale
service for help
Continue range
is short
Faint sound and
heat occurs when
charging battery
Gear box is noisy
Power led is off
Charger led is off Charger is broken Please ask after-sale
service for help
Gear is broken
Car power switch is off
Battery is power-off
Please ask after-sale
service for help
Turn on the power switch
Charge the battery
Chemical reaction Normal reaction
Battery is not fully charged
Battery is over used
Re-charge
Replace battery
Malfunction Analysis Solution

Date Details Result Remark
MAINTENANCE
MAINTENANCE RECORD
13
This product comes with maintenance service.
Maintenance fee is required for product malfunction caused by improper
operation or man-made factor, or if it has exceeded guarantee.
Maintenance service can be provided by the sellor andus. Invoice, maintenance
record and malfunctioningproduct/part(s) will be required.
Customer Name:
Tel:
Address:
Item NO.:
Invoice NO.:

Produced under license of Ferrari Spa. FERRARI, the PRANCING HORSE device,
all associated logos and distinctive designs are property of Ferrari Spa. The body
designs of the Ferrari cars are protected as Ferrari property under design,
trademark and trade dress regulations.
Licensee: RASTAR (HK) INDUSTRIAL COMPANY LIMITED
Manufacturer: FUJIAN XINGHUI BABY SUPPLIES CO.,LTD.
Add : North Area, Zhaoan Industrial Park, Zhangzhou, Fujian, China.
Http://www.rastar.cn
01.04.81900.01101