OPT7 AURA PRO User manual

GOLF CART
INSTALLATION GUIDE
PRO
COMPONENTS
AURA BLUETOOTH CONTROL BOX
LIGHT STRIPS
VARIOUS EXTENSION WIRES
POWER HARNESS WITH ON/OFF SWITCH
ZIPTIES Y-SPLITTERS

BATTERY
FUSE
INSTALLATION
You may choose the desired color choice directly on the OPT7 Connect app
This feature will activate when the aux wiring is connected to the trigger wire for positive (+) wire of
your brake light wire.
We provide multiple sets of extension wires for you to configure. You can quickly extend them
wherever you want to install.
IMPORTANT NOTE!! Before You Start
AUX WIRING FOR A BRAKE LIGHT
Inspect kit to ensure all contents was included.
Decide where to locate the light strips
and ensure wiring has enough length
for control box to be installed in
desired location.
STEP 1
STEP 2
You should ONLY set the color of your aux wire to “red" in color choices within
the app. If you plan on connecting the aux wire to your brake signal wire.
WARNING
NOTE
EXTENSION
WIRE
EXTENSION
WIRE
Y-SPLITTER
AUXILIARY
WIRE
1.
2.
Connecting to more than 10 AMP will override the kit and cause early failure,
ensure it is 10AMPs or less!!
Please ensure that the LED bars or strips/control box/wiring all are mounted in
areas where will not exceed 85℃or 185℉.
WARNING

Open the “OPT7 Connect” App, pair
your smart phone to the control
box, and pick your desired color!
CONNECTED
ON
WHITE
RANDOM
BRIGHTNESS
SOLID
DOOR
ASSIST
OFF
STEP 3
STEP 4
STEP 5
STEP 6
INSTALLATION
Secure the light strips using the
zip ties to tie all the wiring away
from the moving components.
Scan the QR code on the back of
the control box to download the
app.
Secure Control box in desired
location with Velcro or zipties.
* The control box is NOT waterproof. Tuck it away
from the elements.
Heat Shrink Tube
1
2
* IMPORTANT:
The LED connectors are not waterproof.You will
need to use HEAT SHRINKTUBE or ELECTRICAL
TAPE around the LED connectors to ensure
the longevity of the lighting kit.

Colors
Modes
Door Assist
Support
Ability to control up to
4 devices at once
-
-
-
-
-
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 CONNECT APP
DISCLAIMER
QR CODE TO DOWNLOAD
Download the free “OPT7 CONNECT” App
• App iOS (12+) available on App Store
• Android (6 +) available on Google Play
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by
OPT7 Lighting will void product warranty.