Rawlings SL82BB2014 User manual

Please keep this instruction manual for future reference
Assembly Instructions
5 ft Instant Net
MODEL # SL82BB2014
Business hours:
Monday through Sunday, 7:00am to 12:00am Central
Standard Time
For Customer Service please call 1-888-922-2336 or
E-mail: [email protected]
(Made in China)

1
Table of Contents
• Warnings
• Parts List
• Assembly Instructions
Page 2
Page 3
Page 4-8

2
Warnings
● To be assembled and dismantled by an adult.
● This product is not suitable for children under 3 years
of age due to small parts used during construction.
● To be used on a flat and soft surface.
● Ensure frame is securely fixed to ground before use.
● Do not leave the product outdoors in adverse weather
conditions.
● Do not climb on or hang from this product.
● Check regularly for wear and tear. Discontinue use if
any breakage is found. Failure to do so may cause
injury.
● Keep away from heat sources.

Part No.:
1
2
3
4
5
6
7
8
x2
x1
x1
x2
x2
x1
x3
x2
Description Diagram QTY
HOOK AND LOOP
STEEL STAKE
9x1 CARRY BAG
3
BASE TUBE
76 CM STRAIGHT
TUBE
76 CM STRAIGHT
TUBE
80.5 CM FIBER
GLASS POLE
78 CM FIBER
GLASS POLE
NET
Parts list:

Assembly instructions
4
STEP 1. Connect tubes (2 and 3) as shown in Image #1.
STEP 2. Connect assembled tubes (2 and 3) to base tube (1) on each
side as shown in Image #2.
Image #1
Image #2

5
STEP 3. Connect poles (4 and 5) as shown in Image #3.
Image #3
STEP 4. Spread out net (6) and insert assembled poles (4 and 5)
through the sleeves on both sides of the net as shown in
Image #4.
Image #4
Assembly instructions

6
STEP 5. Loop top corners of the net to the tip of pole (5) as shown in
Image #5.
STEP 6. Loop the bottom corner of net over the base tube (1) sockets.
Insert pole (4) into the base tube (1) sockets. Then hook the
loops on the bottom corners of net as shown in Image #6.
Image #5
Image #6
Assembly instructions

7
STEP 7. Use hook and loop (7) to fasten the net to the tube as shown
in Image #7.
STEP 8. Use steel stake (8) to secure the frame to the ground as
shown in Image #8.
Image #7
Image #8
Assembly instructions

8
STEP 9. Product is assembled and ready for use.
Image #9
Assembly instructions