RCA CC635 User manual

USER‘S
GUIDE
CC635/636/637
CAMCORDER

Important Safety Information
Be sure to read all the safety information before you begin to use this product.
Cautions CAUTION: To prevent electric shock, match wide blade of plug to
wide slot, fully insert.
ATTENTION: Pour éviter les chocs électriques, introduire la lame
la plus large de la fiche dans la borne correspondante de la prise et
pousser jusqu au fond.
To reduce risk of injury, charge only rechargeable batteries
recommended by the manufacturer for this camcorder. Other types of
batteries may burst causing damage and personal injury.
FCC Regulations state that unauthorized changes or modifications to this
equipment may void the user’s authority to operate it.
Product Registration
Please fill out the product registration card and return it immediately.
Returning this card allows us to contact you if needed.
Keep your sales receipt for proof of purchase to obtain warranty parts
and service and attach it here. Record the serial and model numbers
located on the bottom of the camcorder.
Model No: _____________________________________
Serial No: _____________________________________
Purchase Date: _____________________________________
Purchased From: _____________________________________
i
WARNING: To reduce the risk of fire or shock hazard, do not expose
camcorder or AC adapter/charger to rain or moisture.
RISKOF ELECTRICSHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important
instructions accompanying the product.
RISQUEDE CHOC
ELECTRIQUENE PAS OUVRIR
CAUTION
ATTENTION
CC635/CC636/CC637
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR
BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

1
Assistance
Table of Contents
Safety Information..............................i
Product Registration...........................i
Table of Contents............................1-2
First-Time Operation
• Assistance..........................................3
• Unpack Camcorder &
Accessories......................................3
• Attach the Adapter/Charger...............4
• Insert a Tape......................................4
• Adjust Handstrap...............................5
• Open Lens Cover...............................5
• Turn on Camcorder............................5
• Select a Recording Speed..................6
• Set the Mode Select Dial...................7
• Adjust Viewfinder and
Eyepiece Focus Control...................7
• Start and Stop Recording...................8
• Play Back Your Recording................8
• Turn off the Camcorder.....................8
• Close Lens Cover ..............................8
• Review Camcorder’s
Operating Controls.....................9-11
Powering Your Camcorder
• Using Adapter/Charger....................12
• Using Rechargeable Battery.......13-15
• Using Optional Car Cord Adapter...16
Remote Controls
• Model CC637 Only
•Install Battery Cell .......................17
• Remote Sensor..............................17
• Buttons....................................18-19
• Models CC635 and CC636
• Buttons....................................20-21
•Install Battery Cell .......................22
• Remote Sensor..............................22
Recording and Traveling Tips ........23
Video Cassettes............................24-25
Recording
• Making a Recording...................26-27
• Viewfinder Displays...................28-31
• Viewfinder.......................................32
• Electronic Image Stabilizer (EIS)....33
• Electronic Indexing .........................33
• Flying Erase Head ...........................34
• Auto Head Cleaner..........................34
• Tally Light.......................................34
• Microphone......................................34
• Quick Review..................................35
•QUICK REC Feature.......................35
• Camera Edit.....................................35
(continued on next page)
We want to make sure you enjoy your new camcorder. If you have any
questions, call:
Camcorder Exchange Warranty..........800-283-6503 (pages 100-101)
Customer Service.........................................800-336-1900 (page 99)
Accessories.............................................800-338-0376 (pages 84-89)

Table of Contents
2
Recording (continued)
Mode Select Dial
• Full AUTO Mode..........................36
• Exposure Control..........................37
• Focusing (Auto and Manual) ..38-39
• White Balance............................40-41
• Recording Menu
• To Display Recording Menu.........42
• Tape Remaining Display...............43
• Set Tape Length.........................43
• Zooming...................................44-45
• Gain Up (Slow Shutter).................46
• Color Filter....................................47
• Titler ........................................48-49
• Date and Time Display
• Set the Date and Time ...............50
• Install the Clock Lithium Cell ...51
• Select Date or Date and Time
You Want to Record ........52-53
• Sub Menu
• Change a Feature In the
Sub Menu...............................54
• Tally Light .................................55
• Set JLIP Identification
Number ..................................55
• Self Timer...................................56-57
• Animation Recording ................58-59
• Time-Lapse Recording ..............60-61
• Fading or Wiping In or Out........62-63
• Production Effects......................64-65
• Audio Dubbing (Remote Only)..66-67
• Edit Insert (Remote Only)..........68-69
Playback
• Using the Cassette Adapter........70-71
• Viewfinder Playback ......................72
• Playback Features
• Visual Searching ...........................73
• Tape Positioning ...........................73
• Stop-Action Pause.........................73
• Time Counter ................................74
• Tracking ........................................75
• Playback on TV (or VCR) With
AUDIO/VIDEO IN Jacks .......76-77
• Model CC637 Only
• Programming Remote to Operate
Compatible VCR ................78-79
• Copying Tapes Using Programmable
Synchro Edit ......................80-81
• Playback on TV Without
Audio/Video Inputs.................82-83
Optional Accessories...................84-89
• Accessory Order Form...............87-89
Built-in Color Enhancement
Light.......................................90-91
Attaching the Shoulder Strap..........92
Information to User..........................93
Care and Maintenance ...............94-95
Trouble Checks ...........................96-98
Customer Assistance and Service ...99
Limited Warranty...................100-101
Specifications ..................................102
Index (Alphabetical) ...............103-105

3
First-Time Operation
• Save the packing materials and box in case you ever need to ship or store your
camcorder.
• The items shown below are packed with your camcorder. If any are missing or
appear damaged, contact your dealer immediately.
Model CC637 Only:
Edit Cable
Part No. 233088
Rechargeable 6-Volt Battery
Part No. FB1260
Cassette Adapter
Part No. 232845
Clock and Remote Cells
3-Volt Micro Lithium Cells
– such as CR2025 – available
from most local drug stores
and camera shops. Use of
other cells present a risk of
fire or explosion.
Model CC635, CC636 or CC637*
*Your camcorder may look slightly different
from the one shown in this manual.
WARNING:
NICKEL CADMIUM
BATTERY MUST BE
RECYCLED OR
DISPOSED OF
PROPERLY.
1. Unpack the camcorder and accessories.
+ -
Cassette Adapter
Battery
(Size "AA" 1.5 Volt)
Caution: Do not
use this adapter/
charger for any
purpose other than
charging the
FB1260 or FB120
battery pack or
supplying power to
the camcorder.
Cautions: Lithium cell batteries. Must be disposed of properly. Never
handle punctured or leaking cells. May cause burns or personal injury.
Keep out of the hands of children. Can cause death or injury if swallowed.
If swallowed, consult a physician immediately for emergency treatment.
The lithium cells used in these devices may explode resulting in a fire or
chemical burn if mistreated. Do not recharge, disassemble, heat above
212˚F (100˚C), or incinerate.
Never use metallic tweezers to hold the cell, and never short circuit the +
and – sides of the cell.
MENU
16X9
BACKLIGHT
AUTO
MANUAL
FRONTLIGHT
AE MODES
EIS
FADE
WIPE
DISPLAY
P
U
S
H
F
O
C
U
S
Assistance
The toll-free numbers are available to help you with any problem you may encounter.
Camcorder Exchange Warranty . . . . .800-283-6503
Customer Service . . . . . . . . . . . . . . . .800-336-1900
Accessories . . . . . . . . . . . . . . . . . . . .800-338-0376
This section describes only the basic steps necessary to set up your camcorder to
record. Refer to the other sections for detailed operation and feature options.
ZOOM
START/STOP
SELF
INT.
TIME
TIME LAPSE
REC
TIME
ANIM.
PAUSE
FF
A.DUB
INSERT
REW
STOP
PLAY
VISS
ANIM.
REW
CANCEL
RANDOM ASSEMBLY EDIT
REC/PAUSE
F FWD
REC
TIME
TIME LAPSE
SELF MBR
START
/STOP
T
W
ZOOM
INT.
ON
OFF
TIME SET
VCR
PLAY PAUSE STOP INSERT
A.DUB
IN
OUT
Remote Control
Model CC635 or CC636
Part No. 221125 Model CC637
Part No. 221185
– OR –
Shoulder Strap
Part No. ACS091
POWER
CHG END REFRESH
AC Adapter/Charger
Part No. 221400
and DC Cable
Part No. 233087

4
First-Time Operation
CAMERA
VCR
POWER
OFF
AUDIO
RF
VIDEO
POWER
CHG END REFRESH
POWER
Indicator DC OUT Jack
Adapter/Charger
To AC 100-
240V, 50/60 Hz
DC Cable
2.Attach the adapter/charger.
Since the battery must be charged
before it can be used the first time,
attach the adapter/charger to the
camcorder.
A. Connect one end of the DC cable to
the DC OUT jack on the
adapter/charger.
B. Connect the other end of the DC
cable to the DC in jack on the
camcorder as shown above.
C. Plug the adapter/charger’s plug into
an operating outlet. The adapter/
charger’s POWER indicator will
light
3.Insert a tape.
•Slide EJECT.
• Turn the tape wheel on the cassette
to remove any slack from the tape.
• Insert the cassette with the tape
wheel facing up and the tape window
facing out.
• Press on the area labeled PUSH until
the cassette door locks into place.

BATT. RELEASE
B
C
AUDIO
JLIP
RF
DC OUT
VIDEO
L
E
N
S
C
O
V
E
R
SP•SLP
QUICK
REC
TRACKING
ER R/M
W.BAL.
PLAY/PAUSE
STOP
FF
+
REW
+
–
VCR
CAMERA
POWER
OFF
5
EJECT
P
U
S
H
LIGHT
OFF
AUT
ON
Tape Wheel
Tape Window
PUSH
Here to
Close
First-Time Operation
4.Adjust the handstrap to fit
your hand.
• Lift the flap on the handstrap and
separate the velcro strip.
• Insert your hand, adjust the strap to
fit snugly, refasten the strap, and
close the flap.
5.Slide LENS COVER control to
open lens cover.
6.Place POWER (CAMERA/
OFF/VCR) switch in
CAMERA.
EJECT Button
• The power indicator will light and
the camcorder will enter record
pause. appears in the
viewfinder when the camcorder is in
record pause.
• The position of this switch tells the
camcorder whether you want to
record (CAMERA), turn the power
off (OFF), or play back tapes (VCR).
• The camcorder will automatically
turn off if it remains in record pause
for five minutes without performing
zoom or other operations. Place
POWER in OFF and then back in
CAMERA.
PAUSE
(continued on next page)
Handstrap Flap
Handstrap Velcro Strip
(Under Flap)
POWER Switch and
Indicator
LENS
COVER
Control

BATT. RELEASE
B
C
AUDIO
JLIP
RF
DC OUT
VIDEO
L
E
N
S
C
O
V
E
R
SP•SLP
QUICK
REC
TRACKING
ER R/M
W.BAL.
PLAY/PAUSE
STOP
FF
+
REW
+
–
VCR
CAMERA
POWER
OFF
6
First-Time Operation
7.Select a recording speed.
Repeatedly press the SP•SLP switch to
select a recording speed. The
indicator for the speed selected
appears in the viewfinder.
Select SP or SLP recording speed.
• SP – Standard play provides the best
picture, but the shortest recording
time (20 minutes with a TC-20 tape).
• SLP – Extended play provides three
times the recording time as SP
(60 minutes with a TC-20 tape).
SLP has slightly more picture noise
in normal playback.
SP•SLP Switch
Note: The length of the tape you are using
must be selected in the recording menu for the
camcorder to correctly calculate the recording
time remaining on the tape. Details are on
page 43.

7
MENU
16X9
BACKLIGHT
AUTO
MANUAL
FRONTLIGHT
AE MODES
EIS
FADE
WIPE
DISPLAY
P
U
S
H
F
O
C
U
S
Electronic Viewfinder
Eyepiece Focus Control
Mode
Select
Dial
8.Set the mode select dial to
AUTO.
• This places the camcorder in the full
AUTO mode.
• In the AUTO mode, the focus,
exposure, and white balance are
automatically controlled by the
camcorder.
• Many of the special effects do not
operate in the AUTO mode. Details
on page 36.
9.Adjust the viewfinder and
eyepiece focus control.
• Pull out and rotate the viewfinder
into a comfortable operating
position.
• Turn the eyepiece focus control to
adjust the focus of the viewfinder for
your vision.
First-Time Operation
(continued on next page)

BATT. RELEASE
B
C
AUDIO
JLIP
RF
DC OUT
VIDEO
L
E
N
S
C
O
V
E
R
SP•SLP
QUICK
REC
TRACKING
ER R/M
W.BAL.
PLAY/PAUSE
STOP
FF
+
REW
+
–
VCR
CAMERA
POWER
OFF
8
First-Time Operation
10. Start and stop recording.
• Press and release the thumb trigger
to start recording. REC 666
appears in the viewfinder, and the
tally light will light when the
camcorder is recording.
• Press and release the thumb trigger
again to stop recording. The
camcorder is now in the record-
pause mode ( appears in
the viewfinder).
PAUSE
11. Play back what you have
recorded.
• Place the POWER switch in VCR.
• Press REW to rewind the tape.
• Press PLAY/PAUSE to play back
the tape in the viewfinder.
• Press STOP when you are finished
playing back the tape.
• Details on viewfinder playback are
on page 72.
12. Place the POWER switch in
OFF to turn off the camcorder.
The power indicator will turn off.
13. Close the lens cover.
Thumb Trigger
Power Indicator
PLAY/PAUSE
Button
REW Button
STOP Button
POWER (VCR/OFF/CAMERA) Switch

9
MENU
16X9
BACKLIGHT
AUTO
MANUAL
FRONTLIGHT
AE MODES
EIS
FADE
WIPE
DISPLAY
P
U
S
H
F
O
C
U
S
First-Time Operation
Lens
EIS Button
FADE/WIPE
Button
14. Review camcorder’s operating controls.
16X9/AE MODES Button
MENU Button
Built-in Color
Enhancement Light
Tally Light
Cassette Door
PUSH here to close.
LIGHT
OFF•AUTO•
ON Switch
EJECT Button
Mode Select Dial
DISPLAY Button
Remote
Control
Sensor
Viewfinder
Power Zoom Lever
“W” - Wide Angle
“T” - Telephoto
Eyepiece Focus Control
Eyepiece
Microphone
LENS COVER
Control
(continued on next page)

BATT. RELEASE
B
C
AUDIO
JLIP
RF
DC OUT
VIDEO
L
E
N
S
C
O
V
E
R
SP•SLP
TRACKING
TER R/M
W.BAL.
PLAY/PAUSE
STOP
FF
+
REW
+
–
CAMERA
VCR
POWER
OFF
QUICK
REC
10
JLIP Jack Handstrap
Thumb Trigger
AUDIO, RF DC OUT, and
VIDEO Jacks
BATT. RELEASE Button
Shoulder Strap
Attachment Ring
Clock Cell
Compartment
Shoulder Strap
Attachment Ring
Attach Battery Here
POWER (VCR/OFF/CAMERA) Switch
and Indicator
First-Time Operation
14. Review camcorder’s operating controls. (continued)
Model CC636 and CC637 Only:
B (Bright) and C(Color) Controls
on Bottom of Viewfinder
See Trouble Checks for details. QUICK REC Button
DC In Jack (Attach
Adapter/Charger DC
Cable Here)

First-Time Operation
11
BATT. RELEASE
B
C
AUDIO
RF
DC OUT
VIDEO
L
E
N
S
C
O
V
E
R
SP•SLP
TRACKING
ER R/M
W.BAL.
PLAY/PAUSE
STOP
FF
+
REW
+
–
SP•SLP
EDIT CANCEL RANDOM EDIT
IN/OUT
COUNTER R/M TRACKING
MAN.W.BAL
EDIT –
SEARCH REW FF STOP PLAY/PAUSE
+
VCR
CAMERA
POWER
OFF
JLIP
QUICK
REC
FF Button
(Also EDIT SEARCH + Button)
REW Button
(Also EDIT SEARCH – Button)
SP•SLP Button
(Also COUNTER R/M Button)
M.W.BAL (Manual
White Balance) Button
PLAY/PAUSE Button
STOP Button
TRACKING Buttons
14. Review camcorder’s operating controls.
(CC637 Only)
Programmable
Synchro Edit
Buttons

12
Powering Your Camcorder
Attach Adapter/Charger
1. Connect one end of the DC cable to
the DC OUT jack on the
adapter/charger.
2. Connect the other end of the DC cable
to the DC in jack on the camcorder as
shown above.
3. Plug the adapter/charger’s plug into
the nearest AC outlet (100-240V,
50/60Hz).
4. If the adapter/charger is properly
connected, its POWER indicator will
light.
Remove Adapter/Charger
1. Unplug the adapter/charger from the
wall outlet.
2. Remove the DC cable from the
adapter/charger and camcorder.
Using an Optional Plug Adapter
An optional plug adapter may be required
in some countries.
1. Plug the adapter/charger’s plug into
the AC plug adapter.
2. Plug the AC plug adapter into the
AC outlet.
AC Plug
Optional AC
Plug Adapter AC 100-240V
BATT. RELEASE
B
C
AUDIO
RF
DC OUT
VIDEO
L
E
N
S
C
O
V
E
R
+
–
POWER
CHG END REFRESH
CAMERA
VCR
POWER
OFF
DC OUT Jack
POWER
Indicator
To AC 100-240V,
50/60 Hz
Caution: Do not use this
adapter/charger for any other purpose
other than charging the FB1260 or
FB120 battery pack or supplying
power to the camcorder.
Using the Adapter/Charger to Power Your Camcorder
The adapter/charger attaches to the camcorder and lets you power your camcorder
directly from standard household power. The adapter/charger operates on 100-240
volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the
camcorder or recharge the battery.
DC Cable

13
BATT. RELEASE
B
C
AUDIO
RF
DC OUT
VIDEO
L
E
N
S
C
O
V
E
R
+
–
VCR
CAMERA
POWER
OFF
Powering Your Camcorder
Attach the Charged Battery
If the DC cable is attached to the
camcorder, remove it before attaching the
battery. Also, install the lithium clock
cell before attaching the battery pack.
Details on page 51.
1. Align the reference mark on the battery
with mark on back of camcorder.
2. Hold the top of the battery flush against
the camcorder and press the bottom of
Using the Battery to Power Your Camcorder
the battery down until it locks into
place.
3. Place the POWER switch in CAMERA.
The power indicator will light.
Remove the Battery
Press and hold BATT. RELEASE on the
camcorder while removing the battery.
Battery Safety
Precautions
Do not short the battery’s
terminals.
Do not attempt to
disassemble or modify the
battery. There are no user-
serviceable parts inside.
Use the battery only with
specified adapter/chargers
and camcorders.
Throwing the battery into
a fire or exposing it to
excessive heat – over
149ºF (65ºC) could be
hazardous.
Marker
Switch
Reference Marks
The battery must be charged as described on the next page before it can be used the
first time. Initial charging will take approximately 70 minutes. When fully charged,
the battery should supply about 55 minutes of operating time (depending on how much
you use the light, zoom, and pause). Conserve battery power by turning the camcorder
off during recording breaks.
Note: The small marker switch on top of the battery is for use as a personal reminder to help
you remember to recharge the battery. It has no other function.
BATT. RELEASE Button
ATTENTION: The RBRC seal on the battery used in your
Thomson Consumer Electronics product indicates that we are
participating in a program to collect and recycle Nickel
Cadmium batteries throughout the United States. Please call
1-800-8-BATTERY for information or contact your local
recycling center.
RBRC
RBRC
Ni-Cd
POWER Switch
and Indicator

14
Powering Your Camcorder
Charge the Battery
If the DC cable is attached to the DC
OUT jack on the adapter/charger, remove
its plug.
1. Align reference mark on battery with
mark on adapter/charger.
2. Hold the battery flush against the
adapter/charger and slide it in the
direction of the arrow.
3. Plug adapter/charger into nearest AC
outlet (100-240V, 50/60Hz).
4. If the battery is properly connected, the
adapter/charger’s CHG (charge)
indicator will light.
Note: If you try to charge a battery that
has not been charged for a long period of
time, it may take a few minutes for the
CHG indicator to light.
5. After the battery is charged, the END
indicator will light.
6. Remove the charged battery by sliding
it off the adapter/charger.
7. Attach the charged battery to the
camcorder.
POWER
CHG END REFRESH
Adapter/Charger
POWER
Indicator
Hold Battery
Flush and
Slide Reference Marks
CHG
Indicator
END
Indicator
REFRESH
Indicator
REFRESH
Button
To AC Wall
Outlet 100-240
Volts, 50/60 Hz.
Caution: When a battery is attached to the
adapter/charger, do not turn them upside down. The
battery may fall off and be damaged or cause injury.
Use the REFRESH Button
The battery will provide increased
operation time if you “refresh” it after
five chargings. The refresh feature
“refreshes” the battery by completely
discharging it.
1. Attach battery to adapter/charger.
2. Press REFRESH. The REFRESH
indicator will light and the battery will
begin discharging.
3. When discharging is completed, the
REFRESH indicator will turn off, and
the CHG indicator will light. The
battery will then charge.
4. After the battery is charged, the END
indicator will light. Remove the
battery from the adapter/charger.

15
Battery Level Indicator
The battery level indicator appears in the
viewfinder and shows you the amount of
power in the rechargeable battery.
Powering Your Camcorder
Battery Care and Storage
•Recharging takes approximately 70
minutes depending on the battery’s
condition.
• Refreshing takes approximately 210
minutes depending on the battery’s
condition.
• After repeated charging and use,
operation time will gradually decrease.
When operation time becomes too short
to be useful, it is time to replace the
battery.
• If the battery discharging must be
stopped in the middle, remove the
battery from the adapter/charger before
unplugging it from the AC outlet.
• Let a hot battery cool down before
attaching it to the adapter/charger.
• The battery will also provide better
service if its power is completely
drained before storing it for long
periods of time (30 days or more).
•The battery should be charged in the
temperature range of 50-95°F (10-35°C)
to prevent damage.
• Do not operate the battery at
temperatures below 32°F (0°C) or
above 104°F (40°C). The battery may
be damaged if operated at temperatures
above 122°F (50°C). Operation time
will decrease at extremely low
temperatures.
• Store the battery at normal room
temperature.
Battery Level Indicator
in Viewfinder
• As the power is used and
appear.
• When the battery power is almost gone,
flashes in the viewfinder. The
camcorder will turn off automatically
after a few seconds. Place the POWER
switch in OFF to turn off the
camcorder before replacing the battery.
The battery level indicator will not be
recorded on the tape when it appears in
the viewfinder.

16
Powering Your Camcorder
1. Place the POWER switch in OFF to
turn off the camcorder. Power
indicator on the camcorder turns off.
2. If the battery or DC cable is attached
to the camcorder, remove it.
3. Hold the top of the power connector
flush against the camcorder and press
the bottom of the power connector
down until it locks into place.
4. Take the vehicle’s cigarette lighter out
of the socket.
5. Insert the car cord’s cigarette lighter
plug into the vehicle’s cigarette lighter
socket. The POWER indicator on the
car cord adapter will light.
6. Place the POWER switch in CAMERA
to turn on the camcorder. The power
indicator on the camcorder lights.
Cautions: The DCC08 is designed to be
used only with vehicles having negative
ground electrical systems.
Use only car cord adapter DCC08 with
this camcorder. Use of any other car
cord adapter may damage the camcorder
and void your warranty.
Optional Car Cord Adapter
The optional DCC08 car cord shown on
page 84 allows you to power your
camcorder from the cigarette lighter
socket of a car, truck, or RV. It converts
12-volts to a 6-volt output.
Note: Consult the installation and operating
instructions enclosed with the DCC08 for
complete operating instructions.
Using the DCC08 Car Cord Adapter
Caution: Make sure the camcorder’s
power is turned off before removing the
car cord’s plug from the cigarette lighter
socket.
BATT. RELEASE
B
C
AUDIO
RF
DC OUT
VIDEO
L
E
N
S
C
O
V
E
R
+
–
POWER Indicator
Power
Connector
Cigarette
Lighter Socket
Optional DCC08 Car Cord Adapter
VCR
CAMERA
POWER
OFF

17
Model CC637 Only: Remote Control
Model CC637 Only: Lithium Cell Installation
The remote’s lithium cell is packed separately. Install it as follows:
1. Turn remote over, insert a pencil or
paper clip in the small hole, and slide
it in the direction of the arrow while
removing the holder.
2. Insert the lithium cell into the holder
with its positive (+) terminal facing up.
3. Slide the cell in the holder back into
the remote until it clicks into place.
Back of
Remote Control
Holder
Insert Pencil Here
Lithium Cell Belt Clip
The remote operates the camcorder by infrared light, so it is protected from electrical
and sound interference. However, the remote must be aimed directly at the
camcorder’s remote sensor. There cannot be any obstructions between them.
MENU
16X9
BACKLIGHT
AUTO
MANUAL
FRONTLIGHT
AE MODES
EIS
FADE
WIPE
P
U
S
H
F
O
C
U
S
DISPLAY
VISS
ANIM.
REW
CANCEL
RANDOMASSEMBLY EDIT
REC/PAUSE
FFWD
REC
TIME
TIMELAPSE
SELF MBR
START
/STOP
T
W
ZOOM
INT.
ON
OFF
TIME SET
VCR
PLAY PAUSE STOP INSERT
A.DUB
IN
OUT
Remote Control Sensor
Notes: Never place anything heavy on top of
the remote or lay it upside-down. This may
accidentally depress the buttons for a long
time and discharge the lithium cell.
Replace the cell when the camcorder fails to
respond to the remote.
Remove the cell from the remote if it will not
be used for a month or more. This will
prevent possible damage from cell leakage. If
leakage occurs, wipe up the liquid inside the
compartment and replace the cell.
Notes: The camcorder may not respond to
the remote if its sensor is exposed to direct
sunlight or strong artificial light.
Remote Sensor
You can program the remote to also operate a
compatible VCR while copying or editing
tapes. Details are on pages 78-79.
Cautions: Lithium cell battery. Replace
only with 3-volt lithium cell – such as CR2025.
Use of other cell presents a risk of fire or
explosion. Must be disposed of properly.
Never handle punctured or leaking cell. May
cause burns or personal injury.
Keep out of the hands of children. Can cause
death or injury if swallowed. If swallowed,
consult a physician immediately for emergency
treatment.
The lithium cell used in this device may explode
resulting in a fire or chemical burn if mistreated.
Do not recharge, disassemble, heat above 212˚F
(100˚C), or incinerate.
Never use metallic tweezers to hold the cell, and
never short circuit the + and – sides of the cell.

18
3
4
5
6
Model CC637 Only: Remote Control
A brief description of Model CC637 remote button’s functions is given here. Many of
the buttons perform the same functions as the corresponding controls on the camcorder.
START/STOP Button
When the POWER switch is in
CAMERA, press START/STOP to
start and stop recording.
Note: If the camcorder is left in record
pause for more than five minutes,
power will turn off.
VISS Button
When the POWER switch is in
CAMERA, press VISS to insert an
index mark. See page 33.
MBR SET Button
This button is used to program the
remote to control a compatible
VCR. See pages 78-79.
TIME LAPSE ANIM.
(Animation)/ REC TIME Button
When the POWER switch is in
CAMERA, press to set amount of
recording time for interval and
animation recording.
TIME LAPSE SELF/INT.
(Interval) TIME Button
When the POWER switch is in
CAMERA, press to activate the
self-timer or select an amount
of interval time for interval
recording.
REW (Rewind) Button
Camcorder’s POWER switch in
CAMERA:
• When the camcorder is in
record pause, press and hold
REW to visually search the
tape in reverse. Release REW
to return to record pause.
Camcorder’s POWER switch in
VCR:
•When the camcorder is
stopped, press REW to rewind
the tape.
• When a tape is playing, press
and release REW to visually
search the tape in reverse.
Press PLAY to return to
normal playback. For brief
searching, press and hold
REW for at least two seconds
to visually search in reverse.
Release REW to return to
normal playback.
1
2
VISS
ANIM.
REW
CANCEL
RANDOM ASSEMBLY EDIT
REC/PAUSE
F FWD
REC
TIME
TIME LAPSE
SELF MBR
START
/STOP
T
W
ZOOM
INT.
ON
OFF
TIME SET
VCR
PLAY PAUSE STOP INSERT
A.DUB
IN
OUT
2
4
5
6
8
9
10
7
3
1
13
14
15
12
11